Lindero H40 True Wireless Earbuds User Manual

H40 True Wireless Earbuds User Manual

Packing list

Earphone x 2 (with M size eartips & earfins)

Charging CaseX1

USB-C Charging CableX1

Eartips (S size) Manual

Tips

1. Except for the operation methods specifically marked in the manual,please do not try to disassemble or replace any parts in the earbuds.
2. Don’t put the earbuds in the water or any others Iiquid.Theearbuds are not waterproof.
3. If any liquid enters the product by accidentally,please disconnect and remove the connection immediately.
4. Please make sure that there is no water on your hands when Installing or uninstalling the product to avoid electricshock.
5. Do not put the product near by the heat source or expose it to the fire source directly.
6. Do not put the product in the environment with strong electro magneticforce, otherwise it will cause product malfunction.

Earphones specifications

Bluetooth version : V5.3
Transmission distance : 10M
Music time : About 5 hours
Horn size : cp 6mm
Charging time : 1.5 hours
Battery capacity : 30mAh
Rated input : 5V=30mA

Charging case specifications

Battery capacity : 230mAh
Charging time: 1.5 hours
Battery voltage: 3.7V
Rated input: 5V=300mA
(All technical information is subject to actual performance)

Charge the Earphones

1. When the battery of the earphones is too low, the earphones will broadcast a reminder of low battery every minute until the earphone shuts down (Voice prompt: “Battery low” ), in this case please charge the earphone in time.
2. when the charging case has sufficient charge, put the earphones back into the charging case; the earphones will enter the charging state, the white light of the earphones will turn on. Then the earphones will be full charged about 1.5 hours later, and the white light of the earphone will turn off.

Charge the Charging Case

Use the included USB-C cable to charge the charging case, which will take about 1.5 hours to complete.

LED Indicator of the charging case

LED Indicator

Charging with USB-C cable| The charging case flashes red light—in charging
The charging case red light stays on—fully charged
When put the earphones back into the charging case, the charging case indicator will remind its battery| The charging case white light stays on for 4s and goes off —have charge
The charging case white light flashes for 4s and goes off—out of charge

Operation Instructions

1. Power on Method 1: Take both earphones out from the charging case, it will be power on automatically.
   Method 2: Long press the left and right earphones touch button for 2 seconds. (Voice prompt: “Power on”)
   Note: The earphones will shut down automatically when they are either not connected or not in use for 5 minutes.

2. Power off Method 1: Put both earphones back into the charging case, it will enter charging status and shut down automatically after fully charged.
   Method 2: Long press either earphone touch button for 5 seconds, then both the left and right earphones will be turned off at the same time.(Voice prompt: “Power off”)

3. Pairing Step 1: Take out both earphones from the charging case, the earphones will power on and enter pairing mode automatically.(Voice prompt: “Pairing”)
   Step 2: At this time turn on the Bluetooth function of your device and search for “H40” Then press “pair” , the earphones will connect to your device successfully. (Voice prompt: “Connected”)

Touch operatiob

General mode

LED Indicator of the Earphones

flashes once every 5 seconds
Connected| The white light goes off

WARRANTY CARD

The warranty co ers your Bluetooth product, including accessories against manufacturing defects (if any) for 1 year from the date of purchase.
Things that are not covered in the warranty
Unauthorized tampering, modifications or repairs of the product.
Physical damage of the product on the account or testing including any use that is not in accordance with the product manual or documentation, or any other instruction pro ided along with Bluetooth product.
For further information on product replacement/ refund related queries, please refer to the terms and conditions mentioned in our ser ice hotline: +86-755-2747 2066.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules.
  Operation is subject to the following two conditions
  (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>