PS Signature BELLA67 Bella 66″x 30″ Freestanding Soaker Tub, White Installation Guide
- October 27, 2023
- PS SIGNATURE
Table of Contents
- PS Signature BELLA67 Bella 66″x 30″ Freestanding Soaker Tub, White
- BEFORE YOU BEGIN
- TOOLS & MATERIALS NEEDED
- ROUGH-IN INFORMATION
- Installation
- Post- Installation Clean-Up
- AFTERCARE and CLEANING
- AVOID USING HARSH CHEMICALS ON ACRYLIC SURFACES
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
PS Signature BELLA67 Bella 66″x 30″ Freestanding Soaker Tub, White
Model: BELLA67
Thank you for choosing P S Signature! We are the standard for superior quality
and affordable bathroom fixtures. To ensure that your installation is smooth,
please read the instructions carefully before you start.
BEFORE YOU BEGIN
- Your tub is shipped to you after a careful and thorough inspection.
- For maximum performance, please follow the instructions and cautions in detail.
- Local building codes vary by location. Observe local plumbing and building codes.
TOOLS & MATERIALS NEEDED
- Level
- Pipe Wrench
- Slip Joint Pliers
- Screw Driver
- Caulking Gun
- Plumber’s Putty
- Silicone Sealant
- Drop Cloth
ROUGH-IN INFORMATION
Installation
- Place the tub on a mat to prevent damage to the surface. Make sure that the legs are in line with the base of the tub.
- Make sure that the tub sits flat. Adjust the legs as needed.
- Position the waste connection correctly.
- Trace the tub’s outline on the floor with a pencil.
- Apply a thick bead of silicone within the bath outline.
- Set the tab in its final position. Let the silicone dry for 24 hours.
Option 1
Option 2
Post- Installation Clean-Up
Remove all construction debris from the tub. Remove tile grout with a wooden popsicle stick or tongue depressor. Never use wire brushes or any metal implements on the tub surface. Using warm water and liquid dishwashing detergent can generally complete post-installation cleanup. Use Painter’s naphtha to remove excess adhesives and/or wet oil-based paint.
AFTERCARE and CLEANING
- Do not fill the tub with extremely hot water as it may damage the tub’s surface.
- Always remove the bath mat after use and hang it to dry. Do not leave the bath mat to dry in the tub to prevent surface damage.
- Use mild liquid household detergent cleaner after use. Do not use abrasive cleaners.
AVOID USING HARSH CHEMICALS ON ACRYLIC SURFACES
- Never remove stains, cigarette tar deposits, or other blemishes with wire brushes, knives, or sharp objects.
- To prevent dulling of the surface, avoid abrasive cleaners or powders.
- Restore dull areas by rubbing with a white polishing compound and applying a “liquid wax”.
- Do not wax areas where you walk or stand.
- Do not use nail polish remover, acetone, dry cleaning fluid, paint remover, or other solvents on the surface.
- After caustic drain cleaners have been applied, clean the surrounding surface immediately.
- Prevent damage to the surface by avoiding contact with burning cigarettes.
website: www.plumbersstock.com|email: support@plumbersstock.com|Phone Number: 435-868-4020.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>