SHARPER IMAGE 208181 Apple Watch Clock Dock Instructions
- June 6, 2024
- Sharper Image
Table of Contents
Item Number: 208181
Item Name: Apple Watch Clock Dock
How to setup NightWatch
Open the Apple Watch app on your iPhone. Tap My Watch, tap General, then turn on nightstand mode. Place your watch into the NightWatch stand with the digital crown facing up. Insert your charger into NightWatch with the charger facing toward the watch and the cord facing down and push it in. Run the wire through the right or left channel depending on your clock’s orientation and snap it into place. Plugin the charger.
How to use NightWatch
When you slide the Apple Watch into NightWatch, nightstand mode will
automatically turn on. To see the time, just tap on the large NightWatch
screen. Even nudging or tapping the table might work.
The Apple Watch was designed to wake up to a tap on the NightWatch surface,
but to also avoid turning on from unintentional movement. Therefore, if the
watch screen does not wake up after taping NightWatch, or if you have tapped
the screen more than eight times in a minute, just wait about ten minutes for
the watch to reset tap mode. At any time, you can use the watch button or
digital crown to wake the screen. Both are accessible on the top of the watch
just behind the orb’s face.
If you set an alarm using the alarm app on your watch, your Apple Watch in
nightstand mode will gently wake you with an alarm sound amplified through the
sound chamber. When the alarm sounds, press the watch button to turn it off or
press the digital crown to snooze the alarm.