Aideepen TJ-56-499 Three Dimensional Rotating Christmas Tree Instructions
- June 6, 2024
- Aideepen
Table of Contents
Three-dimensional rotating Christmas tree instructions
(TJ-56-499)
Function description: Power supply voltage: DC 5V, power supply with DC5
power plug, positive inside and negative outside. The circuit is mainly
composed of a wireless power supply board, a wireless receiving board, and two
Christmas tree circuit boards. The wireless power supply part is mainly
composed of a NE555 oscillating circuit that outputs a square wave signal of
about 50kHz to drive the field-effect tube IRF530. The primary coil and the
secondary coil on the receiving board and the magnetic ring form a switching
transformer. The FET is used to control the primary coil to generate a high-
speed alternating magnetic field, thereby inducing alternating current on the
secondary coil and providing it to the three-dimensional Christmas tree after
full-wave rectification. use.
Circuit diagram
Base board:
Receiving board:
Component list:
Wireless power supply board components list
Marked| Name| Spe.| QTY.| Marked| Name| Spe.| QTY
R2 R6-9| In-line color ring
resistance| 1K| 5| C5 C8| Ceramic
capacitor| 104| 2
R1| In-line color ring
resistance| 270| 1| C4 C11| In-line
electrolytic
capacitor| 470uF| 2
RP1| Vertical blue and
white adjustable
resistor| 10K| 1| C6| In-line
electrolytic
capacitor| 4. 7uF| 1
RS| In-line color ring
resistance| 200| 1| D1 D2 D3| In-line diode| 91414
8| 3
R3| In-line color ring resistance| 4 7K .| 1| 1| In-line
transistor| I RF53
0| 1
R4| In-line color ring
resistance| 47K| 1| 2| In-line triode| 8550| 1
C1 C2 C3
C7| Ceramic capacitor| 103| 4| J1| DC Block| DC-00
5| 1
IC1 IC2| In-line integrated
circuit| NE55
5| 2| LS1| buzzer| Pass i
ye| 1
IC3| Music triode| | 1| | IC Block| 8P| 2
LED1-4| 5MM in-line LED| Col o rfu I| | 4| Primary coil base| | 1
| Primary coil| | 1| | screw| M1.6
8| 2
| DC| RF30
0| 1| | Nut| M2| 2
| screw| M28| 2| | Double pass
copper pillar| M320| 4
| screw| M36| 4| | | |
Wireless receiving board component list
Marked| Name| Spe.| QTY.| Marked| Name| Spe.| QTY
VD1—VD4| In-line diode| 1N5819| 4| C1 C2| In-line electrolytic
capacitor| 220uF/
25V| 2
| Secondary coil| | 1| | Magnetic ring| 5. 9X6.
2| 1
| Magnetic ring seat| | 1| | Self-tapping screws| Ml. 65| 2
| USB to DC cable| DC2. 1
80CM| 1| | | |
A board
name| el| mod
number| 01 Y.| name| model| number| OT Y.
---|---|---|---|---|---|---|---
resist| 300| R2/R4/R| | | 3MM colorful| |
ance| R| 6/R7| 4| LED| light-emitting
ng diode| D1—D18| 19
resist| 5.| R1/R3/R| 3| capacitanc| 47uf| C1/C2/C3| 3
ance| K| 5| | e| | |
Triode| 901
4| 01/02/0
3| 3| PCB board| 1| A board| 1
B board
name| mod
el| number| 01- Y.| name| model| number| GT Y.
---|---|---|---|---|---|---|---
resist ance| 300
R| R2/R4/R
6| 3| LED| 3MM colorful
light—emitti
ng diode| D1—D18| 18
resist ance| 4.7
K| R1/R3/R
5| 3| capacitance
e| 47uf| C1/C2/C3| 3
Tripod
e| 901
4| 01/02/0
3| 3| PCB board| 1| B
board| 1