UEI TEST INSTRUMENT C165 Commercial Combustion Analyzer with Case User Guide
- June 6, 2024
- UEI TEST INSTRUMENT
Table of Contents
UEI TEST INSTRUMENT C165 Commercial Combustion Analyzer with Case
OVERVIEW
MENU SCREEN – C165+ START UP
- Press ”Power” Button for 2 seconds. The analyzer will perform a 10 second purge. This should be done in fresh air.
- Rotate Selector Dial to MENU to set up or customize your settings.
- Selected parameter are highlighted with Display Line Lights on either side.
- Use UP and Down ARROW BUTTONS to scroll menu options.
- Press UP and Down ArrowButton to edit a parameter.
- Press and ARROW BUTTONS to change contents of field.
- Press Back Button to enter content and move to next
STATUS SCREEN
Rotate Selector Dial to STATUS to view parameters
- Ta
- ATM
- CAL
- DATE
- TIME
- BATTERY LEVEL
Change Fuel Type
- With the first line selected press UP and Down ARROW
- BUTTONS to change currently selected Fuel. (NAT
- GAS, H OIL, PELLETS, mmHG, PSI, kPA, PA, mmH2O, mBar)
- Press Back Button to select.
BEFORE TESTING
CHECKLIST
- Clean particle filter
- Water trap and probe line are free of condensate
- All hose and thermocouple connections are properly secured
- Water trap is fitted correctly
- Power on and zero
- Flue gas probe is sampling ambient FRESH air
AUXILIARY SCREEN
BASIC CO/COMBUSTION ANALYSIS
Once complete, remove probe from stack, allow analyzer to purge in fresh air
until CO sensor readings return to ZERO (0) and O2 readings reading return to
20.9%.Continue to the next test or power analyzer off by pressing , if
finished.
NOTE: Print and store functions may be used at any time during testing.
PRESSURE TEST
TEMPERATURE TEST
HEAT EXCHANGER TEST
ROOM CO TEST
PRINTING AND LOGGING
SETUP USER FUEL
POST TESTING
POWERING OFF
When you power off the C165+, there is a 10 second purge.
CAUTION
Make sure you do not exceed the analyzer’s operating specifications.
- Do not exceed the flue probes maximum temperature (1112˚F)
- Do not exceed the analyzer’s internal temperature range 112°F (50°C)
- Do not put the analyzer on a hot surface
- Do not exceed the water trap’s level
- Do not let the particle filter become dirty and blocked
BATTERIES
WARNING
Do not recharge with Alkaline batteries fitted. Alkaline batteries are not
rechargeable. Attempting to recharge alkaline batteries may result in product
damage and create a fire risk. Time and Date will need to be reset after
changing batteries.
Always dispose batteries using approved disposal methods that protect the
environment.
WARRANTY
The C165+ combustion analyzer is warranted for one year. Warranty is a
manufacturing defect identified
within the product’s warranty period. Warranty does not cover batteries,
fuses, test leads, probes, consumables physical damage and misuse. For full
warranty details please refer to the Owner’s Manual on the C165+ product page
(see the link above). If a UEi product fails under warranty, we will replace
it but we need the unit back so we can identify and fix the problem. For an
RMA call Team UEi @ 1-800- 547-5740.
This warranty gives you specific legal rights. You may also have other rights
which vary from state to state.
ANNUAL RECERTIFICATION SERVICES
Complete care for your C160 series combustion analyzer.
When you:
Request Recertification or Service Online Within 1 Year of Purchase or Service
UEi will:
6-Year Warranty: All UEi combustion analyzers have a standard 1-year warranty.
Each recertification includes a 30-point inspection and extends the warranty
for 1 more year for up to 6 years from the
date of warranty.
24-hour Service: Analyzers received for standard recertification and service
through UEi Service+ are shipped back on the next business day.
Free Shipping:
UEi Service+ offers free shipping both to and from our service center. When
customers book their recertification, they
receive a prepaid UPS Ground shipping label.
Register Online
Registering you analyzer online is quick and easy. Just log in or setup an
account, it only takes a couple of minutes. Once logged in you can register
you analyzer by providing some product information and uploading a proof-of-
purchase.
When it’s time to request recertification, just log into your account, select
the analyzer, select the service and place your order.
Documents / Resources
| UEI
TEST INSTRUMENT C165 Commercial Combustion Analyzer with
Case
[pdf] User Guide
C165 Commercial Combustion Analyzer with Case, C165, Commercial Combustion
Analyzer with Case
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>