CHAMPION CHRS310 Raw Juice Centrifuge XL Digital User Manual

June 6, 2024
Champion

CHRS310
USER MANUAL

Read this Manual carefully before use

Safety precautions

Please read this manual carefully before operation and save it for future reference.

  1. This appliance shall not be used by children from 0 years to 8 years. This appliance can be used by children aged 8 years and above if they are continuously supervised. This appliance can be used by people with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved
  2. Keep the appliance and its cord out of reach of children aged less than 8 years. Cleaning and user maintenance shall not be made by children.
  3. Before using, put this machine on a stable and even surface, operate according to instructions in this manual.
  4. During use, do not open the top cover.
  5. To avoid damage or injury, do not put your hand or any other objects (except pushing tube) into the mixing cup or feed port.
  6. Never let children operate the machine.
  7. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
  8. When the appliance is not in use and before cleaning, unplug the appliance from the outlet first¬ly. Always disconnect the appliance from the supply if it is left unattended and before assem¬bling, disassembling, or cleaning.
  9. Do not use accessories, other than those supplied with the appliance.
  10. Do not use the appliance if the rotating sieve is damaged or has visible cracks.
  11. Switch off the appliance and disconnect from supply before changing accessories or approaching parts that move in use.
  12. Household and Indoor use only.
  13. To protect against the risk of electrical shock, do not immerse the unit, cord, or plug in water or other liquid.
  14. The appliance is only intended for the purpose described in the user manual. Do not use an appliance or any part of the appliance out of the intended use to avoid the risk
  15. The use of attachments that are not recommended or sold by the appliance manufacturer may cause a risk of injury to persons
  16. Before juicing, first confirm middle ring, strainer and rotor clutched in position. Put the transparent cover on, fasten the handle, then turn on the machine.
  17. During juicing, make sure there is not too full juice and residue in the middle ring and pulp container. If it is too full, please cut off the power supply, clean up, then use it again.
  18. The over-temperature protective device is mounted in the motor. If the motor works for a long time and gets too hot, the power supply will automatically cut off. After the motor stops, pull out the plug of the power supply, wait for the motor to cool for about 30 minutes, use it again
  19. When this machine works, no-loaded or over-loaded is strictly prohibited.
  20. Cutters are very sharp; it is dangerous to wash them with a hand. Always flush it underwater tap and clean it with a soft brush.
  21. This machine must not be used for others beyond regulated purposes.

Parts

  1. Pushing bar
  2. Transparent cover
  3. Juicing net
  4. Middle ring
  5. Handle
  6. Residue barrel
  7. Main body
  8. Juice jug

Before first use

  1. This machine is equipped with a safety unit, when the handle does not fasten the cover or the cutter seat is not fastened, the motor cannot start.
  2. When disassembling or assembling the juicer, press the upper feed port of the cover with your hand, then force the handle to slide in or out of the cover slot.
  3. When disassembling juicing net, first remove the cover and residue barrel, then turn the middle ring up to 30 degrees by holding juicing nozzle with your hand.
  4. Clean all parts able to disassemble (refer to the section of ”maintenance and cleaning”).
  5. When assembling, see section ”parts”.
  6. When using for the first time there may be a slight smell from the motor, this is normal, after the has worked for some time, this phenomenon will disappear.
  7. In order to prolong the service life of the machine, the over-temperature protective device is mounted in the motor. If the motor works for a long time or is overloaded when over warning temperature, the power supply will automatically cut off. After the motor stops, pull out the plug of the power supply, wait for the motor to cool (about 30min), use again.

Juicing

  1. Before juicing, confirm that the juicing net and rotor are clutched in position. Put the transparent\ cover on, fasten tight the handle, then turn on the machine.
  2. Before using, make sure the button switch of the main machine is in a stop state, in this way, in case assembly is not completed, starting the main machine can be avoided to make sure safe operation.
  3. Before juicing, first confirm juicing net and rotor are clutched in position, and that there is no hard contact between juicing net cutter and transparent cover.
  4. Put the transparent cover in place, put the handle into the cover slot, then turn on the machine.
  5. Turn on the power supply, press the switch to let the machine run no-load for 5 sec. Put prepared vege table or fruit into feed port of the juicer, press with the pushing bar, evenly, hard, and slowly.
  6. The screen will show 3 as the default speed. Also, the number and the speed name will flicker at the same time.
  7. Press the [+] [-] key to accelerate or decelerate the speed. The highest speed is 5 and the lowest is 1.
  8. If you need an instant higher speed, press the Pulse button, this speed is the same as speed 5. The pulse key will not be influenced by the ON/OFF key.

Note: When pressing food with the pushing bar, force shall be even or indirect, pressing force shall not be more than 1 kg, no too sudden force, otherwise, juicing effect will be reduced.

Maintenance and Cleaning

  1. This machine shall be often used, to keep the motor dry and clean. If not used for a long time, please store this machine in a dry and well-ventilated place to prevent the motor.
  2. Do not wash the main machine. When cleaning, only wipe with a wet cloth.
  3. Other components may be washed directly with water.

The customer information on the REACH Regulation and the Candidate List. Of the substances included in the Candidate List, the following appears in this article:
Product contact contains lead exceeding 0.01%
Kind regards, Champion

Warranty

Champion Nordic guarantees that this product is free from manufacturing defects in terms of materials and workmanship during a period of 2 years in Sweden, Norway, Denmark, and Finland. This warranty period begins on the day the product is purchased or delivered. Champion Nordic has no obligation to repair or replace products that are not accompanied by valid proof of purchase. This warranty applies only to pro- ducts purchased and used for home use and does not cover damage resulting from abuse, failure to comply with the instructions from Champion Nordic, cases in which the product has been modified or subjected to unauthorized repair, improper packaging on the part of the owner, normal wear and tear, or improper handling on the part of a transport company.

Correct Disposal of this product
This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.

Champion®
Makadamgatan 14 | 254 64 Helsingborg | Sweden
info@champion.se

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Champion User Manuals

Related Manuals