Shenzhen Renhan Electronics S100 TWS Earphone User Manual
- June 6, 2024
- Shenzhen Renhan Electronics
Table of Contents
Shenzhen Renhan Electronics S100 TWS Earphone
Specifications
True wireless stereo (TWS), real no wires design, individual left and right channel, HIFI sound. both the left and right earbud are Bluetooth enabled, could be used separately, or used as one pair.
| Bluetooth Version | Single-mode V5.0+EDR, ultra-low power consumption |
|---|---|
| Bluetooth Mode | A2DP1.3 / HFP1.6 / HSP1.2 / AVRCP1.6 / D11.3 |
| Bluetooth Frequency | 2.4GHz |
| Bluetooth Range | 10m |
| Battery Capacity | Earbud: 35mAh Rechargeable Li-ion Battery |
Charging Dock: 350mAh (Optional)
Talk / Play Time| Headphone Playback Time: 2-3 hours
Headphone Talk-Time approx.: 2-3 hours
Standby Time| About 6 hours
Headphone Use Steps and Special Instructions
- Automatically turn on after taking out the headset, or long touch for 3 seconds to turn on.
- Open the charging box and take out the earphones, the earphones are automatically turned on and paired.
- Pair with other devices: Open the Bluetooth settings of the mobile phone or other devices, search for Bluetooth S100, and click Connect Bluetooth.
- The headset is placed in the charging box to enter the charging mode, and the headset is automatically turned off.
- Wireless headset will automatically shutdown if it is not connected to the Bluetooth device for 5 minutes.
Headphone Touch Function Description
- Instructions for the main and secondary ears, press the button once to answer the call in the incoming call state, press the button once to hang up the call in the call state, long press the button for 2seconds to reject the call in the incoming call state, short press once to pause/play the music, long press 2 seconds to decrease the volume in the auxiliary ear, long press for 2 seconds to increase the volume in the main ear, triple click the next song in the main ear, triple click the previous song in the auxiliary ear, and double-click the Siri function.
- Turn off and on again, the headset will automatically connect to the phone;
- The whole machine has voice prompts;
- The headset is a two-channel call, there is sound in both left and right ears;
- The charging time is about 70 minutes, the red Right is always on when charging, and it goes out when it is full;
- The charging voltage of the charging box is 5V;
- The charging box can charge the headset about 4 times.
Warnings
- Please do not overuse this earphone or put it under heavy pressure, keep away from wet and heat.
- Keep away from Wi-Fi, router or other high frequency transmitting equipment to prevent interruption of signal receiving.
- Please use this earphone under its working range (10-15m), and the effect would be better if there is no obstacle between the connected devices.
- Use this Bluetooth earphone to connect any device with Bluetooth function.
Summary
- Headphone dust screen
- Multi-function touch button
- MIC
- Charging port
- Charging box charging port
- Charging power display
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.
This equipment can be used in portable exposure condition without restriction.