ZTE A2022PG Axon 30 Ultra 5G Smartphone User Guide
- June 6, 2024
- ZTE
Table of Contents
ZTE A2022PG
(ZTE Axon 30 Ultra 5G)
Quick Start Guide
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS
and the Symbol together, DTS:X, the DTS:X logo, and DTS:X Ultra are registered
trademarks or trademarks of DTS, Inc. in the United States and/or other
countries. © DTS, Inc. All Rights
Reserved.
Other trademarks and trade names are those of their respective owners.
Version No.: R1.0
Edition Time: April 14, 2021
LEGAL INFORMATION Copyright © 2021 ZTE CORPORATION.
All rights reserved.
No part of this publication may be quoted, reproduced, translated, or used in
any form or by any means, electronic or mechanical, including photocopying and
microfilm, without the prior written permission of ZTE Corporation.
Notice
ZTE Corporation reserves the right to make modifications on print errors or
update specifications in this guide without prior notice.
We offer self-service for our smart terminal device users.
Please visit the ZTE official website
(atwww.ztedevices.mx) for more information on
self-service and supported product models. Information on the website takes
precedence.
Visit https://ztedevices.mx/soporte/ to
download the user manual.
Disclaimer
ZTE Corporation expressly disclaims any liability for faults and damages
caused by unauthorized modifications of the software.
Images and screenshots used in this guide may differ from the actual product.
Content in this guide may differ from the actual product or software.
Trademarks
ZTE and the ZTE logos are trademarks of ZTE Corporation.
Android™ is a trademark of Google LLC.
Qualcomm®aptX™ Adaptiv
The Bluetooth®word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such marks by ZTE Corporation is under
license.
Qualcomm®aptX™ is a product of Qualcomm Technologies, Inc. and/or its
subsidiaries.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United
States and other countries. aptX is a trademark of QualcommTechnologies
International, Ltd., registered in the United States and other countries.
Getting to Know Your Phone
Setting Up Your Phone
The nano-SIM card can be installed or removed while the phone is turned on.
WARNING!
To avoid damage to the phone, do not use any other kind of SIM card, or any
non-standard nano-SIM card cut from a SIM card. You can get a standard nano-
SIM card
from your service provider.
-
Insert the tip of the tray eject tool into the hole on the card tray.
CAUTION:
Never replace the included tray eject tool with sharp objects. Ensure that the tray eject tool is perpendicular to the hole. Otherwise, the phone may be damaged. -
Pull out the card tray and place the nano-SIM card (with the metal contacts facing up) on the tray, as shown. Carefully slide the tray back into place.
Charging the Phone
Your phone’s battery should have enough power for the phone to turn on, find a
signal, and make a few calls. You should fully charge the battery as soon as
possible.
WARNING!
Use only ZTE-approved chargers and USB Type-C cables. The use of unapproved
accessories could damage your phone or cause the battery to explode.
WARNING!
Do not remove the back cover. The battery is not removable. Removal may
cause fire or explosion.
-
Connect the adapter to the charging jack.
-
Connect the charger to a standard AC power outlet.
-
Disconnect the charger when the battery is fully charged.
NOTE:
If the battery is extremely low, you may be unable to power on the phone even
when it is being charged. In this case, try again after charging the phone for
at least 20 minutes. Contact customer service if you still cannot power on the
phone after prolonged charging.
Powering On/Off Your Phone
Make sure the battery is charged before powering on.
- Press and hold the Power key to turn on your phone.
- To power off, press and hold the Power key to open the options menu, and touch
NOTE:
If the screen freezes or takes too long to respond, try pressing and holding the Power key for over 10 seconds to restart the phone.
Product Safety Information
| Don’t make or receive phone calls while driving. Never text while driving.
---|---
Keep your phone at least 15 mm away from your body while making calls.
Small parts may cause choking.
Your phone can produce a loud sound.
To prevent possible hearing damage, do not listen at high volume levels for
long periods. Exercise caution when holding your phone near your ear while the
loudspeaker is in use.
Avoid contact with anything magnetic.
Keep away from pacemakers and other electronic medical devices.
Turn off when asked to in hospitals and medical facilities.
Turn off when told to on aircraft and at airports.
Turn off when near explosive materials or liquids.
Don’t use gas stations.
Your phone may produce a bright or flashing
Don’t dispose of your phone in the fire.
Avoid extreme temperatures.
Avoid contact with liquids. Keep your phone dry.
Do not attempt to disassemble your phone
| Only use approved accessories.
---|---
For pluggable equipment, the socket outlet shall be installed near the
equipment and shall be easily accessible.
Don’t rely on your phone as a primary device for emergency communications.
FCC RF Exposure Information (SAR)
This phone is designed and manufactured not to exceed the emission limits for
exposure to radiofrequency (RF) energy set by the Federal Communications
Commission of the United States.
During SAR testing, this device was set to transmit at its highest certified
power level in all tested frequency bands and placed in positions that
simulate RF exposure in usage against the head with no separation, and near
the body with the separation of 15 mm. Although the SAR is determined at the
highest certified power level, the actual SAR level of the device while
operating can be well below the maximum value. This is because the phone is
designed to operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a wireless
base station antenna, the lower the power output.
The exposure standard for wireless devices employing a unit of measurement is
known as the Specific Absorption Rate or SAR. The SAR limit set by the FCC is
1.6 W/kg. This device is complied with SAR for general
population/uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and had been
tested in accordance with the measurement methods and procedures specified in
IEEE1528.
The FCC has granted an Equipment Authorization for this model phone with all
reported SAR levels evaluated as in compliance with the FCC RF exposure
guidelines. SAR
Co-location of this product with other transmitters that operate
simultaneously are required to be evaluated using the FCC multi-transmitter
procedures.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
information on this model phone is on file with the FCC and can be found under
the Display Grant section of
www.fcc.gov/oet/ea/fccid after searching on
FCC ID:
SRQ-ZTEA2022PG. The FCC ID also can be found on the device when you open
settings >About phone >
FCC ID.
For this device, the highest reported SAR value for usage against the head is
0.770 W/kg, and for usage near the body for 15mm is 0.642 W/kg, for 10mm is
1.189 W/kg.
While there may be differences between the SAR levels of various phones and at
various positions, they all meet the government requirements.
SAR compliance for body-worn operation is based on a separation distance of 15
mm between the unit and the human body. Carry this device at least 15 mm away
from
your body to ensure RF exposure level compliance or lower to the reported
level. To support body-worn operation, choose the belt clips or holsters,
which do not contain metallic components, to maintain a separation of 15 mm
between this device and your body. RF exposure compliance with any body-worn
accessory, which contains metal, was not tested and certified, and using such
body-worn accessory should be avoided.
FCC Regulations
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CAUTION:
Changes or modifications not expressly approved by the manufacturer could void
the user’s authority to operate the equipment.
Specific Absorption Rate (EU SAR)
Your mobile device is a radio transmitter and receiver. It is designed not to
exceed the limits for exposure to radio waves recommended by international
guidelines. These guidelines were developed by the independent scientific
organization ICNIRP and include safety margins designed to assure the
protection of all persons, regardless of age and health. The guidelines use a
unit of measurement known as Specific Absorption Rate or SAR. The SAR limit
for mobile devices is 2 W/kg and the highest SAR value for this device when
tested at the head was 0.963 W/kg, and when tested at the body was 1.570
W/kg with 5 mm distance. As mobile devices offer a range of functions, they
can be used in other positions, such as on the body as described in the user
manual**. As SAR is measured utilizing the device’s highest transmitting
power, the actual SAR of this device while operating is typically below that
indicated above. This is due to automatic changes to the power level of the
device to ensure it only uses the minimum power required to communicate with
the network.
- The tests are carried out in accordance with EN 50360, EN 50566, EN50663, EN 62209-1, and EN 62209-2.
** Please see the body-worn operation in the user manual.
Specification
EUT testedradios application| GSM900/1800
WCDMA Band 1,8
FDD LTE Band 1,3,7,8,20,28
TDD LTE Band 38,40,41
5G NR Band N1,3,28,41,78
802.11a/b/g/n/ac/ax
Bluetooth V5.0+BR/EDR/LE
NFC
GPS
---|---
WCDMA Version Rel.9
LTE Version Rel.15
Maximum RF output power| GSM900: 34dBm
GSM1800: 32dBm
WCDMA Band 1: 23dBm
WCDMA Band 8: 23dBm
FDD LTE Band 1: 23dBm
FDD LTE Band 3: 23dBm
FDD LTE Band 7: 23dBm
FDD LTE Band 8: 23dBm
FDD LTE Band 20: 23dBm
FDD LTE Band 28: 23dBm
TDD LTE Band 38: 23dBm
TDD LTE Band 40: 23dBm
TDD LTE Band 41: 23dBm
5G NR Band N1: 23dBm
5G NR Band N3: 23dBm
5G NR Band N28: 23dBm
5G NR Band N41: 23dBm
5G NR Band N78: 23dBm
802.11b/g/n/ax: 18.02dBm
802.11a/n/ac/ax: 19.39dBm
Bluetooth BR/EDR: 7.37dBm
Bluetooth LE: 7.68 dBm
NFC: -16.921dBμA/m @10m
GPS(RX Only)
---|---
CE Caution
Battery Caution
- There is a risk of explosion if the battery is replaced by an incorrect type.
- Dispose of used batteries according to the instructions.
- Do not dispose of a battery into fire or a hot oven, or mechanically crush or cut a battery. Doing so can result in an explosion.
- Leaving a battery at an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas.
- A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
USB Port
This product shall only be connected to a USB interface of version USB2.0.
Proper Use
As described in this guide, your device can be used only in the right
location. If possible, please do not touch the antenna area on your device.
Do not expose your device to extreme temperatures lower than -10 °C and higher
than + 45°C.
EU DECLARATION OF CONFORMITY
Hereby, ZTE Corporation declares that the radio equipment type ZTE A2022PG is
in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following Internet address: https://certification.ztedevices.com
The device is restricted to indoor use only when operating in the 5150to 5350
MHz frequency range.
| AT| BE| BG| HR| CY| CZ| DK
---|---|---|---|---|---|---|---
EE| FI| FR| DE| EL| HU| IE
IT| LV| LT| LU| MT| NL| PL
PT| RO| SK| SI| ES| SE| UK(NI)
DATOS ELECTRICOS DE OPERACIÓN:
Teléfono: 3.87 V ⎓
Adaptador de Corriente ca/cc:
Entrada: 100 – 240V ~ 50/60Hz1.5 A
Salida: 5.0V⎓ 3.0 A / 9.0V ⎓ 3.0 A / 15.0V ⎓ 3.0 A / 20.0V ⎓3.25 A
PPS: 5.0–11.0 V⎓5.0 A / 5.0–20.0 V⎓3.25 A
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>