COFLOW EF DELTA River Pro Portable Power Station 720Wh User Guide
- June 6, 2024
- COFLOW
Table of Contents
User Guide
WARNING
- Keep dry and do not expose to high heat.
- Never disassemble, puncture, shock, crash, short or incinerate.
- Recycle and dispose of EF DELTA in accordance with local regulations.
IMPORTANT SAFETY INSTRUCTIONS
WARNING When using this product, basic precautions should always be
followed, including the following :
a) Please read the instruction manual before using this product.
b) To reduce the risk of injury, close supervision is necessary when using
this product near children.
c) Do not put fingers, hands or any body part into the product.
d) Use of an unrecommended attachment or third-party power station
manufacturer may result in a risk of fire, electric shock or injury.
e) Do not use a damaged or modified battery pack or appliance.
f ) Do not operate the power station with a damaged cord, plug or output
cable.
g) When service or repair is required, do not disassemble the power pack
yourself. Take the unit to a qualified service provider. Incorrect reassembly
may result in a risk of fire or electric shock.
h) In order to reduce the risk of electric shock when the product fails,
disconnects the portable power station from the power supply before performing
any instructive maintenance operations.
i ) Charge the internal battery in a well-ventilated area. Do not restrict
ventilation.
j ) Under harsh conditions, liquid may be ejected from the battery. Avoid
contact with the battery and liquid. If contact accidentally occurs, flush
with water. If liquid contacts eyes, seek additional medical help.
k) Do not expose the unit to fire or excessive heat.
l ) Have servicing performed by a qualified repair person only.
m) The US and Japan versions only support charging with a 100-120V (50/60Hz)
power supply. Do not exceed the specified AC voltage. Otherwise, the company
will not be liable to provide free repair service.
SAVE THESE INSTRUCTIONS
EF DELTA USE A CARE AND SAFETY GUIDE
Congratulations! You now own the best quality Portable Battery Generator in
the world. This pamphlet is short and is meant to help you. Please take a few
moments to read it and follow along on the unit itself. One pass and you will
be a pro! If you are the type of person that doesn’t read instruction manuals,
please at least note this :
To turn ON/OFF EF DELTA, you need to PRESS & HOLD the Power Button. To turn
on the AC power outlet, you need to PRESS & HOLD the AC Button when EF DELTA,
is on.
This is designed purposefully. It will save the battery life so your EF
DELTA’s power is available when you need it.
EF DELTA’s Features : Get to know your EF DELTA. Follow this step-by-step
introduction to each of EF DELTA’s ports, buttons, display screens and more.
Technical Specifications: Understanding the specs that make EF DELTA such
an advanced piece of technology.
How to Charge EF DELTA : Everything you need to know about recharging
your EF DELTA via AC Cable, car charge cable, or solar charge cable (if
applicable).
FAQs: Answers to your most important questions about how to care for your
EF DELTA, store your EF DELTA, and safely use your EF DELTA.
What’s in the Box : What your purchase of EF DELTA should include. If
your purchase does not include these items, please contact us at
support@ecoflow.com.
EF DELTA’S FEATURES
*EcoFlow has designed different AC Output sockets in accordance with the local regulations of different countries.
-
LCD Display
-
USB-A Output Ports
-
Fast Charge USB-A Output Ports
-
USB-C Output Port
-
Power Button & LCD Display Screen ON/OFF Power Indicator Light
-
AC Power Button (PRESS & HOLD for ON/OFF) C Output Indicator Light
-
AC Output Sockets (100-120V)
-
AC Output Sockets (International Version 220-240V)
-
Car Power Output Port Car Power Output Indicator. Ventilation Vents
-
DC Power Button (PRESS & HOLD to switch ON/OFF) DC Output Indicator
-
Solar Charge/Car Charge Input Port
-
X-STREAM AC Charge Input Port
-
Overload Protection Switch
-
LCD Display a. Battery Level Indicator Shows the remaining battery percentage. If your battery drops below 0%, the battery segment on the screen will begin to blink. When this happens, please immediately recharge your EF DELTA.
b. Battery Failure Warning If the circle icon on EF DELTA’s display is flashing, please contact our Product Experts at support@ecoflow.com.
c. Remaining Charge Time Minute-level accuracy of the amount of charge time left in EF DELTA based on the current output level.
d. Low -temperature indicator Indicates that the battery temperature of EF DELTA is too low. All inputs and outputs will stop functioning at this state.Please bring the EF DELTA to a warmer location and wait for the temperature to return to within the working range before restarting the EF DELTA.
e. High -Temperature Indicator Indicates that EF DELTA’s battery temperature is too high. All input and output functions will stop and the fan will start. Once the battery cools, EF DELTA will automatically resume operating.
f. Fan indicator The fan speed of the EF DELTA directly correlates to the load and ambient temperature. The higher the load or ambient temperature, the higher the fan speed. g. Port Usage Indicators Indicates when each port is in use. In addition, press and hold the AC ON/OFF button for 15s to switch between 50/60Hz.
h. Current Output Shows EF DELTA’s current power output level in watts.
i. Current Input Shows EF DELTA’s current power input level in watts.
j. Overload Warning There are two types of overload protection. The first type of protection: in the DC area, when any port is powering devices that exceed the maximum current limit or the output power of the AC jack exceeds the maximum AC power output (Overload 1%-10% will work 3mins overload 11%-30% will work 1min; overload 31%-49% will work 1s; overload 50%-100% will work 100ms), and when the vehicle power supply output exceeds the maximum current, the overload indication and the corresponding interface indicator will flash simultaneously for 15 seconds. The output of the interface will be automatically shut down immediately, and other ports will continue to work. The second type of protection: When the power output from the DC or AC jack, and the vehicle power outlet exceeds the battery maximum power output, the overload indicator and the corresponding port indicator will flash simultaneously for 15 seconds. EF DELTA will automatically shut down immediately. After an overload occurs, remove the overloaded device first, and then restart EF DELTA to resume work. -
USB-A Output Ports Charge a wide array of devices such as your iPhone, tablet, GoPro, speakers, or anything else that charges through USB-A Port. The USB-A Output Indicator Light will automatically light up when a USB-A port is in use.
-
Fast Charge USB-A Output Ports Charge devices at 2x the speed using these ports. The USB-A Output Indicator Light will automatically light up when a USB-A ports is in use. If your device does not support a fast charge, the device will charge at its normal speed.
-
USB-C Output Port Charge MacBook Pro, supported Android mobile phones and other devices using the USB-C port. When the USB-C port is in use, the USB-C output indicator will light up.
-
Power Button & LCD Display Screen ON/OFF Power Indicator Light Press and hold the power button to turn EF DELTA on or off. When EF DELTA is turned on the LCD Display Screen will light up. To turn ON/OFF LCD Display Screen and keep EF DELTA working, press the Power Button. The Power Indicator Light will automatically light up when EF DELTA senses any of the output ports is in use. The Power Indicator Light will flash when none of EF DELTA’s output ports is in use, meaning EF DELTA is in the Idle State. After 5 minutes in the Idle State, EF DELTA’s screen will enter into sleep mode( the battery is still running). After 30 mins of not using in Idle State, EF DELTA will automatically shut down to protect its batteries.
-
AC Power Button (PRESS & HOLD for ON/OFF) The AC power button controls the AC output of the EF DELTA. The AC power needs to be turned on manually. To enable AC power, press the AC power button. When AC power is not in use to charge a device, press the AC power button to turn off the AC power. Make sure to unplug the power cord from the AC port. When the AC power of the EF DELTA is enabled, the AC indicator will light up. If the AC power is not used for more than 12 hours, the product will turn off automatically. In addition, for users in selected countries, please press and hold AC ON/OFF for 15s to switch between 50 and 60Hz.
-
6 AC Output Sockets (100-120V region) / 4 AC Output Sockets(International Version 220-240V) Charge devices that require 100-120V AC (230V for 220-240V edition) wall chargers such as laptops, TVs, mini-refrigerators, vacuums etc.
-
Car Power Output Port & Car Power Output Indicator Charge devices such as drone batteries, that require a carport. The Car Output Indicator Light will automatically light up when the carport is in use.
-
Ventilation Vents The vents prevent EF DELTA from overheating.
-
DC Power Button (PRESS & HOLD to switch ON/OFF) & DC Output Indicator Press DC ON/OFF to turn on or off EF DELTA DC power. The DC ON/OFF button controls the EF DELTA’s DC output. EF DELTA could not recognize when low-power devices, such as earphone, is charging. So EF DELTA is designed to keep the DC power on for 24 hours. The DC power will go off after 24 hours of not using it. If you want to extend your standby time to 24 hours, turn the DC button on.
-
Solar Charge/Car Charge Input Port Supports a maximum of three 110W solar panels to be connected in series. Do not put more than two solar panel for parallel connection. EF DELTA has a limit input of 400W. Supports car charge with a maximum input of 10A.
-
X-STREAM AC Charge Input Port Plug in an AC cable with a universal three-pin plug (one that can withstand an effective current of 15A) into the port and connect the cable to an AC power source. Please note that U.S. and Japan versions only support chargings in 100-120Vac (50/60Hz). The international version supports 220-240Vac (50/60Hz) EF DELTA’s X-STREAM system supports entry-level UPS function, user can use the EF DELTA AC socket while the device is connected to a wall socket with an AC power supply (the AC power comes from the grid, not the battery). When the grid loses power suddenly, the device can automatically switch to EF DELTA battery power mode in <=30ms to ensure your work is not interrupted. This is an entry-level grade UPS function that does not support 0ms switching. Do not connect devices with high uninterrupted power supply requirements. Please perform multiple tests to confirm compatibility before connecting devices, such as data servers and workstations to EF DELTA. EcoFlow will not be responsible for any loss of data or equipment damage caused by customers’ failure in following the instruction.
-
Overload Protection Switch When the input current continuously exceeds 20A during a charge, the AC charging port will trigger overload protection (the button will pop out). When the device is confirmed to be normal, press the button to continue charging.
Protection Information Instruction-EF DELTA display screen indicates various device protection scenarios with different icons and their combination.
- USB-A Overload Protection UAB-A icon flashes together with the Overload icon. Resume normal operation automatically by pulling out electrical appliances and waiting for 10 seconds.
- USB-C High-Temperature Protection USB-C icon flashes together with a High-temperature icon. Resume normal operation of interface automatically by cooling it.
- Product Overload Overload icon flashes. Resume devise to normal operation by pulling out electrical appliances and restarting.
- High-Temperature Recharge-protection Recharging time, Exclamation, and High-temperature icons flash together, frequently occurring after heavy battery use. Recharging can be resumed after the battery cools down.
- High-Temperature Discharge-protection Exclamation and High-temperature icons flash together. The power supply can be resumed after the battery cools down.
- Low Temperature Recharging-protection Recharging time, Exclamation, and Low-temperature icons flash together. Recharging can be resumed by warming up the battery moderately.
- Low Temperature Discharge-protection Exclamation and Low-temperature icons flash together. The power supply can be resumed soon after moving the device to a warmer place.
- Overload Recharging-protection Recharging time, Exclamation, and Overload icons flash together. Resolve the problem by pulling out the plug, restarting the device, and replugging. If not solved, please contact our product specialists via support@ecoflow.com.
- Overload Discharging-protection Exclamation and Overload icons flash together. Resume operation by pulling out electrical appliances and restarting the device. Electrical appliances should be operated within rated power.
- Communication Failure between Main Board and BMS Exclamation icon always being on. Try to restart the device. If still invalid, please contact our product specialists via support@ecoflow.com.
- Battery Cells Failure Exclamation icon always being on. Try to restart the device. If still invalid, please contact our product specialists via support@ecoflow.com.
- Communication Failure between Main Board and AC AC icon flashes. Try to restart the device. If still invalid, please contact our product specialists via support@ecoflow.com.
- Inverter Output Overload AC and Overload icons flash together. Resume operation by pressing ON/OFF to restart AC 10 seconds later. Electrical appliances should be operated within rated power.
- Inverter High-Temperature Protection AC and High-temperature icons flash together. Resume normal operation of interface automatically by cooling it.
- Inverter Low Temperature Protection AC and low-temperature icons flash together. Recharging can be resumed by warming up EF DELTA moderately.
- Fan Blockage AC and Fan icons flash together. Please check if the fan is blocked by foreign matters. If indeed, shut down the device to clean and restart to check operation effect. If still invalid, please contact our product specialists via support@ecoflow.com.
- Car Charger Overload Car and Overload icons flash together. Resume operation by restarting the device. Electrical appliances should be operated within rated power. . Car Charger Over temperature/XT60 Interface Recharging at High-Temperature Car and High-temperature icons flash together. Resume normal operation of interface automatically by cooling it.
- Communication Failure between Main Board and MPPT Car icon flashes. Try to restart the device. If still invalid, please contact our product specialists via support@ecoflow.com.
SOLAR PANEL CONNECTION
How to recharge the EF DELTA using solar panels? For the connection of a
single panel, refer to the instructions of the solar panel. These instructions
are intended for the serial or parallel connection of three of six solar
panels. The EF DELTA can accept DC input of 10-65V. When the input exceeds
65V, the EF DELTA will trigger overload protection. Excessive voltage may
cause damage to the product. Users should follow these instructions. If the
number or connection of the solar panels are not compliant our with
specifications, we will not be responsible for providing free repair services
for any damage to the product even during the warranty period.
1 . Serial connection (recommended) Users can connect 1-3 pieces of solar
panels (up to a maximum of 3 panels) in series as shown in the figure. Connect
the panels to the MC4 port and connect them to our MC4 to XT60 conversion
cable. Connect the XT60 cable to the EF DELTA’s XT60 input to charge the
device.
2. Serial and parallel connection (professional solution) Users can connect up to 2 sets of solar panels in parallel to the MC4 port as shown in the figure. If you want to connect 6 solar panels, you can put them into 2 sets of 3 solar panels connected in series and then connect the 2 sets of solar panels in parallel. Connect them with our MC4 to XT60 conversion cable and connect the XT60 cable to the EF DELTA’s XT60 input to charge the device. The parallel connection cable is an optional accessory that needs to be purchased separately.
Solar MC4 parallel connection cable * Users have to buy the solar panels and
related parallel connection accessories on their own.
3. The EF DELTA supports the use of third-party solar panels (DIY
solution) Users can buy universal solar panels of MC4 connection standard
on their own to power the EF DELTA. As long as the voltage and current (10-65V
DC,10A max) comply with the specifications of the EF DELTA, the panels will be
able to recharge EF DELTA through the MC4 to XT60 conversion cable. However,
the company will not be responsible for providing free repair services for any
damage to the product caused by the quality issue and improper operation of
such third-party solar panels even during the warranty period.
Entry-Level UPS and series mode
Precautions when using EF DELTA UPS and series mode When EF DELTA has UPS or
series mode on, EF DELTA’s X-STREAM system supports an entry-level UPS
function. You can use the EF DELTA AC socket while the device is connected to
a wall socket with an AC power supply (The AC power comes from the grid, not
the battery). When the grid suddenly loses power, the device can automatically
switch to EF DELTA battery power mode at <=30ms to ensure your work is not
interrupted. Series mode is a multi-level power series solution developed
based on the UPS function. It allows users to connect two EF DELTAs in series
to get continuous power that is two times more than a single machine. The
principle of using it is when the power of an EF DELTA is used up, the next
machine can immediately replace it to continue the power supply. This is an
entry-level UPS function that does not support 0ms in switching power.
Do not connect devices that require a high continuous power supply.
Otherwise, please run multiple tests to confirm its compatibility before
connecting devices, such as data servers and workstations, with EF DELTA.
EcoFlow does not take responsibility for any data loss or equipment damage
caused by customers’ failure in following the instruction.
1. Entry-Level UPS user guide
Users can connect the EF DELTA AC charging cable to the power grid and connect
an electrical device to EF DELTA turn on the AC switch and automatically enter
the entry-level UPS mode. When the external power is cut off, the battery will
immediately supply power to protect your device. 2 . Series mode user
guide(recommended for power users; all machines must be fully charged)
Users can connect no more than 2 fully charged EF DELTAs in series using the
AC charging cable to get continuous power and supply appliances with high
output requirements for up to 1.8 hours. In this mode, do not connect EF DELTA
to the power grid using an AC charging cable, or the overcurrent protection
(<20A) may be triggered. Connect EF DELTA to a home power grid and charge each
EF DELTA separately. We do not recommend you to charge more than two EF DELTA
at the same time. Otherwise, the excessive load may cause damage to the home
power grid. To use this function, you need to set one EF DELTA as the Master
and the others as Serve 1. Connect one AC cable to the AC output port of the
master unit and the other side to the input port of Serve 1. After connecting
the EF DELTA, turn all the AC switches on EF DELTA to activate the multi-
machine series mode. Finally, connect all the appliances to the AC sockets
of Serve 1. Then you can charge your devices by using EF DELTA and enjoy the
benefits from extended powering time.
Example 1
Example 2 :
TECHNICAL SPECIFICATIONS
General Specs|
---|---
Net Weight| 30.9lbs (14kg)
Dimension| 15.7 x 8.3 x 10.6in (40 x 21 x 27cm)
Capacity| 1008Wh / 1260Wh （50.4V）
Testing and certification| UL CE FCC RoHS PSE
Output
AC Output (x6)/(x4)
Full Sine Wave| 1600W (Surge 3100W)total,120Vac ( 60Hz)/230ac (50Hz)
---|---
1800W (Surge 3300W)total,120Vac (60Hz)/230ac (50Hz)
USB-A Output (x2)| 5V DC,2.4A,12W Max,per port
USB-A Fast Charge (x2)| 5V DC,9V DC,12V DC,2.4A,28W Max,per port
USB-C Output (x2)| 5V DC,9V DC,15V DC,20V DC,3A,60W Max,per port
Car Power Output (x1)| 108.8W,13.6V DC,8A max
Input
| AC Charge Input Power | X-STREAM Charge 1200W max |
|---|---|
| AC Charge Input Voltage | 100-120Vac (50Hz/60Hz) ONLY! |
| (International Version 220-240Vac ONLY!) | |
| Solar Charge Input | 400W 10-65V DC 10A max |
| Car Charger(Example 2) | 12V/24V DC 10A max |
Battery
| Cell Chemistry | Lithium-ion |
|---|---|
| Cell Type | 18650 |
| Discharge Temperature | -4-140°F (-20-60°C) |
| Charge Temperature | 32-113°F (0-45°C) |
| Shelf Life | 1 Year (after fully charged) |
| Life Span | 800 Cycles (80%+) |
HOW TO RECHARGE EF DELTA
Example 1 ：
Example 2 :
We recommend you to start the car before connecting the car charger to EF
DELTA. How do I recharge my EF DELTA?
Everything you need to know about recharging your EF DELTA via AC Cable, car
charger or solar charger (if applicable).
Can EF DELTA power my device while it’s charging?
Yes, EF DELTA can be charging and output power in the same time. When you are
charging EF DELTA, we do not recommend connecting an electrical appliance with
power over 800w for discharging, because the current capacity of the wall
outlet is limited.
FAQs
How do I care for EF DELTA?
EF DELTA is designed for various uses. If you need to clean EF DELTA, please
use a dry and non-abrasive cloth to clean the surface. You can use cleaners
designed for mobile phones or computer screens can to clean EF DELTA, but do
not give it a bath!
How do I store EF DELTA?
- EcoFlow offers a water-resistant, dustproof case and we recommend you to use it when you plan to store your EF DELTA for a long time.
- Make sure to recharge EF DELTA to around 85%.
- Put EF DELTA into the case
- Please store your EF DELTA in a dry environment without being surrounded by abrasive objects. For optimal battery health, store EF DELTA in room temperature.
- Discharge EF DELTA to 30%, then charge to 85% every 3 months. This can help prolong the battery life and ensure your EF DELTA is ready to recharge the gears at all times. Without any external sources for power supply during storage, EF DELTA has a shelf life of over a year.
How do I use EF DELTA safely?
Please use EF DELTA in its operating temperature range. Using EF DELTA outside
of its optimal operating temperature range can push the machine beyond its
safe and effective limits. Do not submerge your EF DELTA in water. It is not
waterproofed and this will void your warranty. If you want to protect EF DELTA
against moisture and dust, use an EF DELTA protector (IP54) or safety box
(IP68, which can be purchased from ecoflow.com). Do not block the ventilation
Fan while using EF DELTA.
Warning! Do not charge the machine immediately after it is fully
discharged. For safety, please cool the battery for 2-3 hours before charging!
If you attempt to charge the machine immediately after a full discharge,
the machine will display a protection reminder. This is a normal phenomenon.
Please cool the machine for 2-3 hours before charging it.
WHAT’S IN THE BOX ****
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>