Hxw Technology DM30 Personal Monitor Amplifier User Manual
- June 6, 2024
- Hxw Technology
Table of Contents
Hxw Technology DM30 Personal Monitor Amplifier
Thank you for selecting the DM30 personal monitor amplifier! Please take the time to read this manual carefully to get the most out of the unit . We recommend that you keep the manual at hand for future reference .
FRONT PANEL
-
DRUM INPUT
Connect your device such as electric drum , keyboard etc . to this input . -
MUSIC INPUT
Connect your another device such as electric drum , keyboard etc . Phones to this input . -
DRUM VOL
This knob adjusts the volume of channel one . -
MUSIC VOL
This knob adjusts the volume of channel two . -
BASS
Adjust the amount of low frequency level . -
MIDDLE
Adjust the amount of MID frequency level . -
TREBLE
Adjust the amount of high frequency level . -
BLUETOOTH
Click to open the Bluetooth function of — LED rapid shine; search equipment name: DRUM AMP; LED bright, and a tinkling, the pairing is successful; click switch to start playing music (to support playback device) the indicator light flashes slowly, and then click the switch can pause — LED bright; press 3 seconds off Bluetooth; when playing music can adjust EQ the knob to change the music high / medium / low frequency; -
GND &LIFT
This switch is used to control the on -off of AC ground wire and DC ground wire, so as to eliminate the grounding noise and suppress the electrical interference. -
AC INLET SOCKET
Connect the included AC power cable to this inlet . -
POWER SWITCH
Switch ON/OFF the machine .
WARNING! – IMPORTANT SAFETY INSTRUCTIONS
-
Use only the supplied power supply or power cord . If you are not sure of the type of power available , consult your dealer or local power company.
-
Never break off the ground pin on the power supply cord .
-
Never attempt to by- pass the fuses or fit ones of the incorrect value .
-
Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks . Refer all servicing to qualified service personnel .
-
Refer all servicing to qualified service personnel . Servicing is required when the apparatus has been damaged in any way, such as when the power supply cord or plug is damaged , liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture , does not operate normally or has been dropped .
-
Do not defeat the safety purpose of the polarized or grounding-type plug . A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong . The wide blade or the third prong is provided for safety. If the provided plug does not fit into your outlet , consult an electrician for replacement of the obsolete outlet .
-
Do not allow liquids of any kinds water, soft , drinks , etc . to penetrate the unit . Never place objects filled with liquids , such as vases or glasses on the DM30 this can cause electric shock . Do not place naked flame sources , such as lighted candles , on the DM30 as this can cause fire .
-
The power supply cord should be unplugged when the unit is to be unused for long
periods of time . -
Protect the power cord from being walked on or pinched , particularly at plugs , convenience receptacles and at the point where they exit from the apparatus .
SPECIFICATION
- Power Output: 25W RMS
- Power Consumption: 30W
- Impendence
- DRUM: 68k ohm
- MUSIC: 68k ohm
- Input sensitivity
- DRUM: -27dB
- MUSIC: -25dB
- EQ
- BASS: +/ – 15dB@60Hz
- MIDDLE: +/ – 15dB@1. 5kHz
- TREBLE: +/ – 15dB@10kHz
- BT: Bluetooth V5.0 , Stereo input
- Speaker: 8 inch woof + 2 inch tweeter) Dimensions: 402mm367mm370mm (LWH) Net Weight: 6.2KG
- Gross Weight: 7. 5KG
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference receiv
ed,including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party
responsible for Compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, p ursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against h armful
interference in a residential installation. This equipment generates uses and
can radiate radio freq uency energy and, if not installed and used in
accordance with the instructions, may cause harmful interfe rence to radio
communications. However, there is no guarantee that interference will not
occur in a partic ular installation. If this equipment does cause harmful
interference to radio or television reception, which c an be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interfer ence by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐Consult the dealer or an experienced radio/TV technician for help important announcement .
Radiation Exposure Statement
To comply with FCC RF exposure compliance requirements, this grant is
applicable to only mobile configurations. The antennas used for this
transmitter must be installed to provide a separation distance of at least 20
cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>