NORTHERN TOOL EQUIPMENT G200 Air Purifier User Guide

NORTHERN TOOL EQUIPMENT G200 Air Purifier

G200 Package Contents

1. G200 Core
2. Main Stand
3. Mini Stand
4. Core Filter
5. Carbon Filters
6. Pre Filters
7. Lithium Ion Smart Batteries
8. Remote Control
9. Power Adapter
10. AAA Batteries·
11. User Manual”

CELIOS G200 Product Specifications

Speed 4 – 22W
Dimensions

(with main stand):

| 14.125″ X 5.75″ X 10.5″
Dimensions (with mini stand)| 12.375″ X 4″ X 9.5″
Weight| G200 Core Unit w/out batteries: 3Ib 5oz G200 Core Unit w/ batteries: 4Ib

G200 Main Stand: 3Ib 10oz Mini Stand: 4 oz

|
Noise Level (dBA):| In G200 Main Stand : Speed 1 – 34, Speed 2 – 46, Speed 3 – 56, Speed 4 – 64

In Mini Stand : Speed 1 – 36, Speed 2 – 52, Speed 3 – 62, Speed 4 – 71

3 Stage Filtration:| Carbon Filter, Pre Filter and Core Filter
Filter Life Expectancy:| 24 Hour Use – Pre Filter: 2 months, Carbon Filter: 2 months, Core Filter: 4 months 12 Hour Use – Pre Filter: 4 months, Carbon Filter: 4 months, Core Filter: 8 months
Certifications and Symbols:|  | %| 80083 5 –| @

READ AND SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INFORMATION

WARNING: To reduce the risk ot fire or electric shock, do not use this fari with any solid-state speed control device

WARNING: Unplug or disconnect the appliance from the power Supply before servicing.

WARNING: The appliance is only to be used with the power suppiy unit provided and it must on;y be supplied at safety extra low voltage, corresponding to the marking on the appliance

WARNING: NOT SUITABLE FOR USE WITH SOLID·STATE SPEED CONTROLS

• DO NOT operate any tan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair

• DO NOT rem cord under carpeting Do not cover cord with throw rugs, runners or similar covers. Do not route cord under
  f.wniture or appliances. Arrange cord away from the traffic area and where It will not be tripped over

• DO NOT ail ow children to operate ihe G200 or play near the G200.

• DO NOT operate if the power cord is damaged Only plug the power cord into a standard electrical outlet.

• DO NOT use outdoors

• DO NOT immerse the GZOO in liquid and do not handle the G200 with wet hands NOT insert a finger or foreign object into the airflow openings.

• DO NOT use the G200 in toxic or explosive environments or where flammable or combustible gases are present

Where to place your G200

The Celios G200 is designed to purify air in small rooms or personal spaces, such as your bedroom, office, or car to create a zone of purified air around you. Use in larger rooms, may require longer run time to achieve desired purification. The G200 comes with a Main Stand and a Mini Stand. You can easily move the G200 Core between its two stands.

Main Stand
The Main Stand includes a Carbon Filter that removes Volatile Organic Compounds (VOCs), which include gases and odors, such as those emitted from common household products. The Main Stand provides sound dampening and offers higher fan output when using the power adapter.

Mini Stand
The Mini Stand offers convenience and portability to easily dock your G200 Core air purifier with a small footprint, providing an unobstructed air flow at the Core air intake when the Core is not used with the Main Stand.

Once the batteries are charged, the G200 Advanced Air Purifier can be used anywhere you choose for up to 24 hours unplugged. You can place the unit on almost any flat surface, with or without a stand. When you are not using a stand, just be sure to place the G200 on its side, so the honeycomb grill on the bottom of the Core is not obstructed and is free to pull in air.

INSTALLING THE AIR FILTERS

The G200 uses three different powerful air filters. All are colored blue for easy identification. You will need to order a G200 Filter Pack about every 8 months. Each pack contains one Core Filter, two Carbon Filters, and two Pre Filters. To order a G200 air filter kit, please visit our website at SoClean.com/Air.

Install the Core Filter
The G200 comes with one Core Filter. This filter captures ultrafine particules down to 1 0 nanometers in size. You will need to replace your Core Filter about every 8 months.

1. Slide the Core Filter into the G200 Core with the grill facing up.
2. The filter clicks into place when properly installed.

Install the Pre Filter
The G200 comes with two Pre Filters. You will install one and save one for future use. The Pre Filter is made from material often found in HVAC systems, specifically designed to capture large airbone particles, such as dust, pollen, and pet dander. You will need to replace your Pre Filter about every four months.

Install the Carbon Filter
The G200 comes with two activated granular Carbon Filters. You will install one now and save one for future use. The Carbon Filter removes gases, odors, and VOCs emitted from common household products. You will need to replace your Carbon Filter about every four months.

1. Remove the Carbon Filter tray from the Main Stand.
2. Place the Carbon Filter into the tray as shown.
3. Slide the tray back into position in the G200 Main Stand.

INSTALLING THE LITHIUM ION SMART BATTERIES
The G200 runs on either outlet power or Lithium Ion Smart Batteries, which are included with your G200 purchase. These batteries are hot swappable, which means you can remove either of them without shutting down the G200 or interrupting air purification. The expected life of each Celios Lithium Ion Smart Battery is approximately 2-3 years. To purchase additional batteries, please visit our website at SoClean.com/Air.

Install Batteries into the G200 Core

1. There are two slots for the Lithium Ion Smart Batteries above the Pre Filter you just installed. Pull the silver wire and rotate it upwards.
   2. Take one Lithium Ion Smart Battery and align the battery slots to the slots within the unit. The unit will beep when the first battery is correctly installed.
   Take the second battery and do the same. Note you will not hear a beep with the second battery. Also, note battery label orientation may not reflect i I illustration. Place the silver wire back into position and replace the back cover onto the G200 Core unit.

Dock the G200 Core in the Main Stand

1. Plug the Power Adapter into the Main Stand and then to a powered electrical outlet.
2. Slide the G200 Core into the Main Stand. The control panel on the Core will be facing the same side as the Remote.
3. When you correctly dock the G200 Core in the Main Stand, the unit will beep (whether you have AC power or not). If the G200 Core is not properly installed, it will not beep and will not sit properly within the Main Stand.

Charge the Batteries

1. After turning on the G200 Core, the battery life indicator lcD on the control panel shows that the batteries are charging. When the batteries are fully charged or when there are no batteries in the G200 Core, the battery life indicator light will turn off.
2. You can also charge the batteries outside of the Main Stand by plugging the Power Adapter directly into the G200 Core.

Note: The G200 can operate:

• On one or both of its batteries
• Without batteries and power provided by the Power Adapter

Charging the Batteries the First Time
Properly charging the batteries will allow maximum runtime and battery life. The following procedure should be followed on the first charge of any new batteries.

1. After inserting batteries, connect the Core with the supplied power adapter. The Core can be docked in the Main Stand or plugged in directly.
2. Allow the batteries to charge until full You may run the G200 on any setting while charging.
3. Turn the unit on to Speed 1 and remove the power adapter plug.
4. Allow the unit to fully discharge and power off. This operation can take up to 30 hours.
5. Fully charge the unit again per Steps 1 and 2 above. The batteries are now properly charged for maximum performance.

This procedure can be repeated if the battery life is lower than expected. If this procedure fails to increase battery life, contact Customer Care at 866-501-3705 or [email protected].

SETTING UP THE REMOTE CONTROL
The G200 uses Bluetooth remote control device, which can work within a 75 ft range. When not in use, store the remote control in the slot on the front of the G200 Main Stand.

Pair the Remote Control with the G200 Core

1. Install the provided two AAA batteries into the Remote Control.
2. With the G200 powered on, press and hold the Core power button for 6 seconds. The Core will beep and its power button will begin to flash, indicating that it has entered Bluetooth pairing mode.
3. While the Core is in pairing mode, turn on the Remote Control by pressing its power button. The light on the Remote will flash briefly, indicating that it has also entered Bluetooth pairing mode.
4. After 6 seconds, both the Core and the Remote Control light will stop flashing. The two are now paired.

Remote Control Settings
You can control the G200 settings from:

• The control panel on the Core
• The G200 Remote Control

POWER BUTTON
Turns the G200 on and off.

FAN SPEED BUTTON
The G200 has four fan speeds. Each delivers a different speed of air purification. To select the fan speed you desire, press the fan speed button on the control panel to cycle through the speed settings. You can also use the Remote Control to cycle through the fan speeds. When you power on the G200, the device will remember the last used speed setting. The Ce!ios G200 Advanced Air Purifier operates at four fan speeds, so you can adjust the power to best meet your needs.

INDICATOR
With functioning AAA batteries, the indicator will illuminate with each press of a button on the Remote Control. The light also flashes during pairing. If the light does not illuminate, please check or change the AAA batteries.

NIGHT MODE BUTTON
The night mode button controls the G200’s display panel illumination. This option is only accessible via the remote control. To operate the night mode:

1. Press the night mode button on the Remote Control to turn off the display lights.
2. Press the night mode button again to turn the display lights to 100%.
3. Pressing the button a third time will turn the display lights to 50%.

Core Panel Description

Cleaning your G200

CLEANING THE G200 GRILLS
If you notice that the G200 airflow is weaker than expected, or if the grey grills on the top of the Main Stand look dirty, then it is time to clean the grills. The grills are magnetically attached and can be removed from the Main Stand and cleaned with soap and water. Allow to dry before replacing.

• When you correctly dock the G200 Core in the Main Stand with power, the unit will beep.
• When you install the first battery (partially or fully charged), the G200 will beep to let you know that the battery is installed correctly.
• If the G200 becomes blocked and there is no airflow, an alarm will sound.
• If the G200 Core Filter is missing, not seated properly or has become saturated with filtered contaminants, an alarm will sound.

Under normal use (12 hours/day): The Pre Filter and Carbon Filter should be changed every 4 months, while the Core Filter should be changed every 8 months.
Under heavy use: (24 hours/day): The Pre Filter and Carbon Filter should be changed every 2 months, while the Core Filter should be changed every 4 months.

Filter Life      Alarm         Light                     Symbol        How to Pause Alarm

Over 50%| No indication

50%

|

60 Secs

|

Ye!!ow Flashing

|

“‘”‘

| Quickly press Filter Button, light will remain on

20%

|

60 Secs

|

Red Flashing

|

”'”‘·

|

Quickly press Filter Button, light will remain on

70%

|

60 Secs

|

Red Flashing

| ,, /;| Quickly press Filter Button, light will remain on
50%| Replace Pre Filter and Carbon Filter. Note: Use the 2 extra that were included with your inital order.
---|---

20%

| Order Core Filter Replacement. lf you haven’t already, order a Filter Replacement Pack (includes Core Filter, Pre Filters and Carbon Filters).

10%

| Replace all 3 filters: Pre Filter, Carbon Filter and Core Filter. Reset the filter timer by pressing the Filter Button for 3-5 seconds.

TROUBLESHOOTING

• Install charged batteries or connect

Unit does not power on to AC adapter

• Replace batteries witt’,cr.arged ones

 |  | or install AC adapter
Battery should be charging| • Battery(‘ies) is(are) full

• No battery(ies) inserted

• AC adapter not plugged in

• Battery may be at er.d of life

• Battery may be over temperature limit

| • The battery tight will not display when full andattached to AC adapter

• Insert 1 or 2 batteries into either slot

• Plug AC adapter into a working outlet

• Install new battery and recycle old

• Allow the battery(ies) to cool before

“”

Pressure Light AND Warning Light are illuminated AND Beeping is heard| • Core Filter no! installed properly

• Core Filter is loaded

| • Ensure the Core Filter is fully seated

and latched into the Core

• Remove and discard okl Core F\l.ter; install new Core Filter

Unit powered on AND Fan does not operate AND Warning Light flashing| • General system error

(Warning, Pressure, Beep)

| • Remove all power sources; install

AC adapter to verify operation; add banery(ies)

Remote will not pair

|

• Error in communications

| Solution     .•· >· .•..;<… i./.

• Remove batteries in Remote; Pressure Light ANO Warning Light are illuminated ANO beeping is heard remove all power sources from the Core; reinstall power to the Core then batteries into the Remote; perform pairing sequence again

---|---|---
Flow is reduced but no Pressure Warning Light| • Core Filter life is very close to zero| • Replace the Core Filter
Air exiting the Core has an unpleasant smell| • Carbo11 Filter may be depleted| • Replace the Carbor. Filter
Core will not fit into the Main Stand| • Pre Filter may not be seated fully| • Press the Pre Filter fully into place and install the Back Cover
Unit powers on then immediately powers off| • Battery(ies) may be low| • Charge battery(ies) with the supplied AC adapter
Filter Life Button flashing AND Beeping| • Filter Life trip point has been met| • Press the Filter Life Button once to silence; Filter Life Button will be solid but no beep

SoClean Inc. warrants this product under this warranty for a two (2) year limited warranty for defects in manufacture or workmanship.
For all warranty issues, a Return Authorization Number and Proof of Purchase is required. Please contact SoClean at SoClean.com or 866-501-3705 for a Return Authorization Number. Returned products must be shipped prepaid. coos are not accepted. Products repaired or replaced under this warranty will not incur re-shipping charges. Under this warranty, the sole remedy shall be repair or replacement at SoClean’s discretion. Any repaired or replaced product will be warranted for the remaining period of the original warranty. Replacement products may contain new or refurbished parts. This warranty does not cover product failures due to misuse, abuse, improper maintenance, normal wear and tear, typical required periodic replacement products, or circumstances beyond the control of SoClean. The Product is not designed for or warranted against damage from use in areas subject to extreme temperature, excessive moisture, or other inherently hazardous environments.

IMPORTANT: Please purchase your Filters from SoClean.com to ensure authenticity. For purchases from an online marketplace such as Amazon®, please check “sold by SoClean” before making your purchase. Warranties will be voided if the product ls used with inauthentic Filters and not replaced in accordance with usage instructions LIMITATION DAMAGES: SO CLEAN SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. NO LIABILITY ARISING FROM ITS USE, HOWEVER, CAN BE ACCEPTED BY THE COMPANY, WHICH RESERVES THE RIGHT, WITHOUT PRIOR NOTICE, TO ALTER THE SPECIFICATIONS, CONSTRUCTION, OR CONTENT OF ITS EQUIPMENT AT THE COMPANY’S OWN DISCRETION.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>