QAZQA 104416 Charlotte Black Solar Instruction Manual
- June 6, 2024
- QAZQA
Table of Contents
Charlotte Black Solar
104416/104417
Installation
- Loosen the screws on the bottom of the luminaire and take the baseplate out.
- Install the baseplate on the concrete as shown below.
- Fix the luminaire on the baseplate by screws.
Cautions
- Please install this solar LED Lamp at the places exposed to the sunlight directly, with no shelter.
- If the LED light starts to continuously flash, it indicates that the unit is low on power and needs to be recharged.
- Please do not change anything about the solar panel or battery.
- Please understand that the working time will be affected when sunshine is not enough(Rainy, Cloudy).
Optional Functions & Features
- Future-Proof Design, The solar panel + LED Module is replaceable after a working lifetime. No need to replace the whole luminaire, to save cost.
- Security Lighting Option: After 30 seconds without human movement detected, the light will be turned down to 20% brightness automatically(Default setting)
- Complete Off Option: After 30 seconds without human movement detected, it will be turned off automatically(This option needs to take the solar panel out and press the switch button one time, then it will be switched to this option.
- Turn off: At night, press the switch button 3 seconds to turn off the light.
-Instruction for solar panel+LED Module replacement and mode selection
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>