LISKA SV-14QW Smart Watch Instructions
- June 6, 2024
- LISKA
Table of Contents
SV-14QW Smart Watch
Instructions
Appearance instructions.
- Watch case.
- Power button
- Touch display.
- Watch strap.
- Sensor.
- Charging contact.
- Charging line.
2. Download and install App and match.
http://www.qcwireless.cn/appdownload/index.html
2.1. Long press the power button to power on, please make sure that the
battery is full for the first time. If the battery is low, it cannot be
powered on normally.
2.2. Use the mobile phone to scan the QR code on the right to download and
install the App; or search for”Watch” in Apple Store / Android App market to
download and install. Compatible systems: Android 4.4 and above, Bluetooth 4.0
mobile phone, iOS 9.0 and above. When installing App, please pass all
permissions, otherwise, it will not work normally.
2.3. rum on the mobile App, make sure Bluetooth and GPS are turned on,
click”Device Management”-“Binding Management”, and search for the device to be
bound. When matching, please confirm that it is consistent with the Bluetooth
MAC addre4ss displayed on the wristband.
Operational Instructions.
3.1. Power on long-press the power button for 3 seconds to power on, and then
enter the time interface.
3.2. Power off: in the time interface state, long-press the power button for 3
seconds to enter the power-off interface, and then long-press the power button
or the screen to confirm the power-off, or drop down the “Shortcut Menu” and
select”Power off”.
3.3. Brighten screen: Press the power button to brighten the screen, or rotate
the wrist in the App settings so that the wrist is rotated to brighten the
screen.
3.4. Touch: swipe left and right to switch the interface, swipe up and down to
turn pages, click enter or confirm, and swipe right to return or exit.
Main functions instructions
4.1. Time interface: 1 custom dial (select your favorite picture as the
background in the “custom interface” on the App) + 3 fixed dials + 3 App push
dials (select your favorite dial in the “Dial Market” on the App for
replacement); Swipe left and right under the time interface and the first
level menu to switch the dial at will. Under strong light, please select the
appropriate dial and screen brightness.
4.2. Language settings: After the watch is connected to the mobile phone App,
it will automatically synchronize the mobile phone language. If necessary, it
can also set the language on the watch, and currently, it supports 20
languages.
4.3. Step-counting: Record the number of steps, sports mileage, and heat
consumed on the day, and synchronize the data with the app.
4.4. Sleep: Automatically detect sleep time and status from 10:00 pm to 8:00
am, and synchronize data with the app. It can detect data only by wearing a
wristband to sleep.
4.5. Heart rate measurement: Click the wristband heart rate interface to”Start
measuring’; measure the heart rate all day: tum on “heart rate timing
measurement” in App” Device management”.
4.6. Sports: walking/running/hiking/exercising/riding/swinging, after
Bluetooth successfully connects with the mobile phone App, the data will be
synchronized to the App; dick “Start measuring” on the sports interface to
select the sports mode you need, and enter the sports mode interface, the
sports data will) be displayed: mileage/consumption/heart rate, and swipe the
screen to the right to exit the sports mode.
4.7. Blood pressure measurement: Enter the blood pressure measurement
interface, please keep your body relaxed during the measurement, and the blood
pressure value will be displayed after 30 seconds.
4.8. Blood oxygen measurement: Enter the blood oxygen measurement interface,
please keep your body relaxed during the measurement, and the blood oxygen
saturation will be displayed after 30 seconds.
4.9. Reminder settings: Turn on the app, set”Alami clock reminder”, “Drinking
water reminder; excessive sitting reminder, message reminder, call reminder
and social software reminder (QQ Wechat, Twitter, Facebook, Whatsapp,…) in the
interface of “Device management” -“Reminder settings’:
4.10. Remote control photographing. Android: The system turns on the mobile
phone App, and the watch enters the remote control photographing function and
clicks”Start photographing” to complete the photographing. 10S: Enter
the”Photographing control” on the watch, turn on the camera on the mobile
phone, and dick”Start photographing” to complete the photographing.
4.11. Music Control: Keep the connection between the watch and the mobile
phone App, enter the watch music menu, and dick Play to successfully play the
music in the mobile phone. Click Ito pause or resume, &di to play the previous
song, dick to play the next song. mobile
4.12. Game: Enter the game menu and click to enter the game, and it can be
controlled by touch and gravity sensors.
4.13. Do not disturb mode: Click “Do not disturb mode” in the drop-down
shortcut menu of the watch, and it will not receive any vibration reminder
from mobile phone.
4.14. Brightness adjustment: Click”Brightness adjustment” in the drop-down
shortcut menu of the watch to adjust the brightness of the watch’s display
screen according to the environment.
4.15. Stopwatch: It can realize the stopwatch function. 4.16. Factory data
reset: Factory data can be reset in the settings menu of the watch.
Precautions.
5.1. ConnedingBluetooth:
- Please ensure that the Bluetooth and GPS of the mobile phone are turned on and the watch is turned on.
- When searching for Bluetooth, please ensure that the watch has not been bound by other accounts.
- When searching for Bluetooth, try to keep the watch and mobile phone within a closer distance.
5.2. If other software such as mobile manager is installed in the user’s
mobile phone, in order to ensure the normal operation of the background App,
please turn on the push notification and allow the background operation
permission on the mobile phone, otherwise, the notification cannot be pushed.
5.3. Charging requirements: Use the charger with the specification of 5V
0.5-1A for charging. Please use a dedicated charging line for charging. After
charging, unplug the data cable from the charger to avoid short-circuit
hazards caused by adsorption on metal. If you don’t use it for a long time,
please turn it off and recharge it once every month.
Basic parameter.
- Master control chip: nRF52832
- Heart rate sensor: V(31
- Data transmission: BLE 5.0
- Battery type: Polymer lithium battery
- Battery capacity: 230 mAh
- Charging voltage: 5.0V
- Charging current: 150 mAh
- Working temperature: —5–45
- Waterproof: IP67
Disclaimer:
Warning: This product is not a medical device, and the wristband and its application shall not be used for diagnosis, treatment, or prevention of diseases and symptoms. If you want to change the habits of sports, sleep, etc… please consult qualified professional medical personnel first to avoid major casualties. Our company reserves the right to modify and improve any function described in this instruction without prior notice. Meanwhile, our company reserves the right to constantly update the product contents, and all contents shall be subject to the material objects.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>