Imou Cue 2 Smart Monitoring with AI Human Detection User Guide

June 6, 2024
imou

Imou Cue 2 Smart Monitoring with AI Human Detection User Guide

Imou Logo

Imou Illustration

Packing List

Packing List

Camera Introduction

Camera Introduction

Note:

  • Press and hold the reset button for 10s to reset the camera.

The pattern of the LED indicator is included in the following table.

LED Indicator Status Device status
Off
  • Powered off/LED turned off
  • Rebooting after reset

Red light on|

  • Booting
  • Device malfunction

Green light flashing| Waiting for network
Green light on| Operating properly
Red light flashing| Network connection failed
Green and Red light flashing alternately| Firmware updating

Operating With Imou App

Step 1 Scan the following QR code or serach “Imou” in Google Play or App Store to download and install the Imou App.

Step 2 Run Imou App, and then register an account for first use.

Step 3 Connect the camera to power source with the power adapter.

Step 4 Wait for booting to be finished, and then the camera indicator flashes with green light.

Step 5 Connect your smartphone to your Wi-Fi network, and make sure your smartphone is connected to Wi-Fi network with 2.4GHz band, and then do the following operations to finish adding camera.

Operating With Imou App

Note:

  • If you have more than one camera, do step 5 to add them one by one.
  • If the Wi-Fi network changed or the indicator status goes wrong, reset the camera, and then do step 5 to add it again.

Installing Camera

Note: Make sure the mounting surface is strong enough to hold at least three times of the device weight.

When installing the camera with mounting foam, make sure the mounting surface is smooth. Stick the mounting foam on the camera pedestal, and then attach the pedestal on the mounting surface, press and hold it for 10s.

Step 1 Drill screw holes on the mounting surface as the positioning map shows, and then put in the expansion bolts.

Step 2 Attach the mounting plate to the mounting surface with the self- tapping screws.

Step 3 Attach the camera to the mounting plate, then power it up, and then, adjust the lens to the ideal angle.

About the Guide

  • This quick start guide is for reference only. Minor difference might be found in user interface.
  • All the design and software here are subject to change without prior written notice.
  • All trademarks and registered trademarks mentioned are the properties of their respective owners.
  • Please visit our website or contact your local service engineer for more information.
  • If there is any uncertainty or controversy, please refer to our final explanation.

Hereby, ZHEJIANG DAHUA VISION TECHNOLOGY CO.,LTD. declares that the radio equipment type Cue 2 is in compliance with Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address: www.dahuasecurity.com/support/notice/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals