fram FDW-VRR606BDE++ Dishwasher User Manual

fram FDW-VRR606BDE++ Dishwasher

Thank you for choosing this Fram product!

INTRODUCTION

Please read the instructions carefully and keep the manual for future information. This instruction manual is designed to provide you with all required instructions related to the installation, use and maintenance of the appliance. To operate the unit correctly and safety, please read this instruction manual carefully before installation and usage.

 YOUR PACKAGE CONTAINS

• ➔ Dishwasher
• ➔ User manual
• ➔ Warranty card

SAFETY PRECAUTIONS

General Safety Warnings

• Read these instructions carefully before using your appliance and keep this manual for future reference. Please check the packaging of your machine before installation and the outer surface of the machine once the packaging has been removed. Do not operate the machine if it appears damaged or if the packaging has been opened.
• Packaging materials protect your machine from any damage that might occur during transportation. The packaging materials are environmentally friendly as they are recyclable. Use of recycled material reduces raw material consumption and decreases waste production.
• This appliance can be used by children aged from 8 years and above, and by persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand hazards involved. Children should not be allowed to play with the appliance.
• Remove packaging and keep it out of reach of children.
• Keep children away from detergents and rinse aids.
• There may be some residue left in the machine after washing. Keep children away from the machine when it is open.

Installation Warnings

• Choose a suitable and safe place to install your machine.
• Only original spare parts should be used with the machine.
• Unplug the machine before installation.
• Your machine must only be installed by a service agent or a similar qualified person. Installation by anyone other than an authorized person may cause your warranty to be void.
• Check that the indoor electrical fuse system is connected in line with safety regulations.
• All electrical connections must match the values on the plate.
• Ensure the machine does not stand on the electrical supply cable.
• Never use an extension cord or a multiple socket connection.
• The plug should be accessible after the machine is installed.
• After installation, run your machine unloaded for the first time.
• The machine must not be plugged in during positioning.
• If the electrical cable is damaged, it should only be replaced by a qualified electrician.

During Usage

• This machine is for domestic use only; do not use it for other purposes. Commercial use will void the guarantee.
• Do not stand, sit or place loads on the open door of the dishwasher.
• Only use detergents and rinse aids produced specifically for dishwashers. Our company is not responsible for any damage that may occur due to misuse.
• Do not drink water from the machine.
• Due to the danger of explosion, do not place any chemical dissolving agents into the machine’s washing section.
• Check the heat-resistance of plastic items before washing them in the machine.
• Only put items in the machine which are suitable for dishwashing and take care not to overfill the baskets.
• Do not open the door while the machine is in operation, hot water may spill out. Safety devices ensure the machine stops if the door is opened.
• The machine door should not be left open. It may cause accidents.
• Place knives and other sharp objects in the cutlery basket in a blade-down position.
• For the models with the automatic door-opening system – when the EnergySave option is active, the door will open at the end of a program. To prevent damage to your dishwasher, do not attempt to close the door for one minute after it has opened. For effective drying, keep the door open for 30 minutes after a programme has ended. Do not stand in front of the door after the auto-open signal sounds. THIS MODEL DOESN’T HAVE AUTOMATIC DOOR-OPENING SYSTEM.
• In the case of a malfunction, repair should only be performed by an authorized service company, otherwise the warranty will be void.
• Before repair work, the machine should be disconnected from the mains. Do not pull the cable to unplug the machine. Switch off the water tap.
• Operation at a low voltage will cause a decline in performance levels.
• For safety, disconnect the plug once a program has finished.
• To avoid an electric shock, do not unplug the machine with wet hands.
• Pull the plug to disconnect the machine from the mains, never pull on the cord.

RECYCLING

• Some machine components and packaging consist of recyclable materials.
• Plastics are marked with the international abbreviations: (>PE<, >PP<, etc.)
• The cardboard parts consist of recycled paper. They can be put into wastepaper containers for recycling.
• Material unsuitable for domestic waste must be disposed of at recycling centers.
• Contact a relevant recycling center to obtain information about disposal of different materials.

PACKAGING AND THE ENVIRONMENT
Packaging materials protect your machine from damage that may occur during transportation. The packaging materials are environmentally friendly as they are recyclable. The use of recycled material reduces raw material consumption and therefore decreases waste production.

PRODUCT DESCRIPTION

1. Worktop
2. Upper basket with racks
3. Upper spray arm
4. Lower basket
5. Lower spray arm
6. Filters
7. Rating plate
8. Control panel
9. Detergent and rinse-aid dispenser
10. Cutlery basket
11. Salt dispenser
12. Upper basket track latch
13. Active drying unit: This system provides better drying performance for your dishes

Technical specifications

Operating voltage / frequency

| 220-240V

50Hz

Total current (A)| 10(A)
Total power (W)| 1900(W)
Water supply pressure| Maximum: 1 (Mpa)

Minimum: 0.03 (Mpa)

INSTALLATION

Machine positioning

• When positioning the machine, place it in an area where dishes can be easily loaded and unloaded. Do not put the machine in an area where the ambient temperature falls below 0°C.
• Read all warnings located on the packaging before removing the packaging and positioning the machine.
• Place the machine close to a water tap and drain. Take into consideration that the connections will not be altered once the machine is in position.
• Do not hold the machine by its door or panel.
• Leave an adequate distance around the machine to allow ease of movement when cleaning.
• Ensure the water inlet and outlet hoses are not squeezed or trapped and that the machine does not stand on the electrical cable while positioning.
• Adjust the feet so the machine is level and balanced. The machine should be placed on flat ground otherwise it will be unstable, and the door of the machine will not close properly.

Water connection

• We recommend fitting a filter to your water inlet supply in order to prevent damage to your machine due to contamination (sand, rust, etc.) from indoor plumbing. This will also help prevent yellowing and deposit formation after washing.
• If models are marked with 25°, the water temperature may be max. 25 °C (cold water).
• For all other models: Cold water preferred; hot water max. temperature 60 °C.

Water inlet hose

• WARNING : Use the new water inlet hose supplied with your machine, do not use an old machine’s hose. WARNING: Run water through the new hose before connecting.
• WARNING: Connect the hose directly to the water inlet tap. The pressure supplied by the tap should be a minimum of 0.03 MPa and a maximum of 1 MPa. If the pressure exceeds 1 MPa, a pressure relief valve must be fitted between the connection.
• WARNING: After the connections are made, turn the tap on fully and check for water leaks. Always turn off the water inlet tap after a wash program has finished.

An Aquastop waterspout is available. Do not damage it or allow it to become kinked or twisted. Drain hose

Connect the water drain hose directly to water drain hole or to the sink outlet spigot. This connection should be minimum 50 cm and maximum 110 cm from floor plane.
IMPORTANT : Items will not wash properly if a drain hose longer than 4 m is used.

Electrical connection
WARNING: Your machine is set to operate at 220-240 V. If the mains voltage supply to your machine is 110 V, connect a transformer of 110/220 V and 3000 W between the electrical connection.

• Connect the product to a grounded outlet protected by a fuse complying with the values in the “Technical Specifications” table”.
• The earthed plug of the machine must be connected to an earthed outlet supplied by suitable voltage and current.
• In the absence of earthing installation, an authorized electrician should carry out an earthing installation. In the case of use without earthing installed, we will not be responsible for any loss of use that may occur.

BEFORE USING THE APPLIANCE

Preparing your Dishwasher for first use

• Check whether the electricity and supply water specifications match the values indicated in the installation instructions for the machine.
• Remove all packaging materials inside the machine.
• Set the water softener level.
• Fill the rinse aid compartment.

The importance of water decalcification
For a good washing function, the dishwasher needs soft, i.e. less calcareous water. Otherwise, white lime residues will remain on the dishes and the interior equipment. This will negatively affect your machine’s washing, drying and shining performance. When water flows through the softener system, the ions forming the hardness are removed from the water and the water reaches the softness required to obtain the best washing result. Depending on the level of hardness of the inflowing water, these ions that harden the water accumulate rapidly inside the softener system. Therefore, the softener system has to be refreshed so that it operates with the same performance also during the next wash. For this purpose, dishwasher salt is used.

Fill the salt
Use softener salt specifically produced for use in dishwashers. To fill with softener salt, first remove the lower basket and then open the salt compartment cap by turning it counterclockwise. (1) (2) At first use, fill the compartment with 1 kg salt and water (3) until it is almost overflowing. Using a funnel will make filling easier (4). The funnel is not provided with the product. Replace the cap and close it. After every 20th-30th wash, add salt into your machine until it fills up (approx. 1 kg). We recommend that you use small grained of powder softener salt. Do not put table salt into your machine otherwise, the function of the softener compartment may decrease over time. When you start your dishwasher the salt compartment gets filled with water. Therefore, put the softener salt prior to starting your machine. This way, overflowing salt gets immediately cleaned up through the wash operation. If you are not going to wash any dishes immediately after putting salt, then run a short washing program with an empty machine to avoid any damage (to prevent corrosion) to your machine due to the salt overflow while filling in the salt container.

Fill the salt compartment with water the first time you fill the salt compartment only.
Use softener salt specifically produced for use in dishwashers. When you start your dishwasher, the salt compartment is filled with water, therefore put the softener salt in prior to starting your machine. If the softener salt has overflowed and you do not start the machine immediately, run a short washing program to protect your machine against corrosion.

Testing strip (it is not provided in product package)
The washing effectiveness of your machine depends on the softness of the tap water. For this reason, your machine is equipped with a system that reduces the hardness in mains water supply. The washing effectiveness will increase when the system is correctly set. To find out the water hardness level of water in your area, contact your local water distributor or determine water hardness level by using a test strip (if available).

NOTE: Level is set 3 as default. If the water is well water or has a hardness level above 90 dF, we recommend that you use filter and refinement devices.

Water Softener System
The dishwasher is equipped with a water softener which reduces the hardness in the mains water supply. To find out the hardness level of your tap water, contact your water company or use the test strip (must be purchased separately, is not provided with the product).
Setting
To change the salt level, follow the below steps:

• Touch the program button and hold it down.
• Turn on the machine.
• Hold down the Program button until “SL” disappears.
• The machine will display the last setting.
• Set the level by touching the Program button.
• Turn off the machine to save the setting.

WARNING: in case of moving, to configure the water hardness setting according to the water hardness of the area you have moved is important for the effectiveness of washing.

Detergent usage
Only use detergents specifically designed for domestic dishwashers. Keep your detergents in cool, dry places out of reach of children. Add the proper detergent for the selected program to ensure the best performance. The amount of detergent needed depends on the cycle, load size, and soil level of dishes. Do not fill detergent into the detergent compartment more than required; otherwise, you can see whitish streaks or bluish layers on glass and dishes and may cause glass corrosion. Continued use of too much detergent may cause machine damage. Using little detergent can result in poor cleaning and you can see whitish streaks in hard water. See the detergent manufacturer’s instructions for a further information.

Filling the detergent
Push the latch to open the dispenser and pour in the detergent. Close the lid and press it until it locks in place. The dispenser should be refilled just before the start of each program. If the dishes are heavily soiled, place additional detergent in the pre-wash detergent chamber.

Using combined detergents
These products should be used according to the manufacturer’s instructions.
Never put combined detergents into the interior section or the cutlery basket. Combined detergents contain not only the detergent but also rinse-aid, salt replacement substances and additional components depending on the combination.
We recommend you do not use combined detergents in short programs.
Please use powder detergents in such programs.
If you encounter problems when using combined detergents, please contact the detergent manufacturer. When you stop using combined detergents, make sure that water hardness and rinse aid settings are set to the correct level.

Rinse-aid usage
The rinse aid helps to dry the dishes without streaks and stains. Rinse-aid is required for stain-free utensils and clear glasses. The rinse aid is automatically released during the hot rinse phase. If rinse aid dosage setting set too low, whitish stains remains on dishes and dishes do not dry and washed clean. If rinse aid dosage setting set too height, you can see bluish layers on glass and dishes.

Filling with rinse aid and making the setting
To fill the rinse aid compartment, open the rinse-aid compartment cap. Fill the compartment with rinse aid to the MAX level and then close the cap. Be careful not to overfill the rinse aid compartment and wipe up any spills.

To change the rinse aid level, follow the below steps before turning on the machine:

• Touch the program button and hold it down.
• Turn on the machine.
• Hold down the program button until “rA” disappears. Rinse aid set follows water hardness set.
• The machine will display the current setting.
• Set the level by touching the program button.
• Switch off the machine to save the setting.

The factory setting is “4”.
If the dishes are not drying properly or are spotted, increase the level. If blue stains form on your dishes, decrease the level.

LOADING YOUR DISHWASHER

For best results, follow these loading guidelines. Loading the household dishwasher up to the capacity indicated by the manufacturer will contribute to energy and water savings. Manual pre-rinsing of tableware items leads to increased water and energy consumption and is not Recommended. You can place cups, glasses, stemware, small plates, bowls, etc. in upper basket. Do not lean long glasses against one another or they cannot remain steady and may receive damage. When placing long stem glasses and goblets, lean them against the basket edge or rack and not against other items. Place all containers such as cups, glasses, and pots into the dishwasher with the opening facing downwards otherwise water can collect on items. If there is a cutlery basket in the machine, you are recommended to use the cutlery grid to obtain the best result. Place all large (pots, pans, lids, plates, bowls etc.) and very dirty items in the lower rack. Dishes and cutlery should not be placed above each other.

WARNING: Take care not to obstruct the rotation of spray arms.
WARNING: Make sure after loading the dishes do not prevent opening the detergent dispenser.

Recommendations
Remove any coarse residue on dishes before placing the dishes in the machine. Start the machine with full load. Do not overload the drawers or place dishes in the wrong basket.

WARNING : To avoid any possible injuries, place long-handle and sharp pointed knives with their sharp points facing down or horizontally on the baskets.

Upper basket
Height Adjustable Rack
The height adjustable racks enable glasses and cups to be placed on or under the racks. The racks can be adjusted to 2 different heights. Cutlery and utensils can also be placed on the racks horizontally.

Height adjustment
The upper basket includes a mechanism which enables the height of the basket to be adjusted up (1) or down (2) without having to remove the basket. Hold the basket on both sides and pull it up or push it down, ensuring both sides of the upper basket are in the same position.

Alternative Basket Loads Lower Basket

Upper Basket

Incorrect Loads
Incorrect loading can cause poor washing and drying performance. Please follow the manufacturer’s recommendations for a good performance result

Unsuitable items for dishwashing

• Cigarette ashes, candle leftovers, polish, paint, chemical substances, iron-alloy materials.
• Forks, spoons and knives with wooden, bone, ivory or nacre coated handles; glued items, items soiled with abrasive, acidic or base chemicals.
• Temperature-sensitive plastics, copper or tin coated containers.
• Aluminum and silver objects.
• Some delicate glasses, ornamental printed porcelains; some crystal items, adhered cutlery, lead crystal glasses, cutting boards, synthetic fibred items.
• Absorbent items such as sponges or kitchen rugs.
  IMPORTANT: In future, purchase dishwasher-proof kitchenware.

PROGRAM TABLE

| P1| P2| P3| P4| P5| P6
---|---|---|---|---|---|---
Program Name:| Eco| Auto| Hygiene 70°C| Super 50’| Quick 30’| Prewash
__

__

__

Type of Soil:

| Standard program for normally soiled daily using dishes with reduced energy and water consumptions.| __

__

Auto program for heavily soiled dishes.

| Suitable for heavily soiled dishes requiring hygienic washing.| __

Suitable for normally soiled daily dishes with faster program.

| __

Suitable for lightly soiled dishes and quick wash.

| __

Suitable to rinse dishes that you plan to wash later.

Level of Soil:| Medium| Heavy| Heavy| Medium| Light| Light
Amount of Detergent: A: 25 cm3

B: 15 cm3”

| __

A

| __

A

| __

A

| __

A

| __

A

| __

–

Program Duration (h:min)| 3:25| 01:25 – 01:57| 2:07| 0:50| 0:30| 0:15
Electricity consumption (kWh/cycle)| __

0.923

| __

1.450 – 1.700

| __

1.9

| __

1.1

| __

0.74

| __

0.02

Water consumption (l/cycle)| 12| 11.9 – 17.2| 16| 12| 12.4| 4.5

• The program duration may change according to the number of dishes, the water temperature, the ambient temperature and selected additional functions.
• Values given for programs other than the eco program are indicative only.
• If your model has turbidity sensor, it has Auto program instead of Intensive program.
• Eco program is suitable to clean normally soiled tableware, that for this use, it is the most efficient program in terms of its combined energy and water consumption, and that it is used to assess compliance with the EU eco-design legislation.
• Washing tableware in a household dishwasher usually consumes less energy and water in the use phase than hand dishwashing when the household dishwasher is used according to the manufacturer’s instructions.
• Only use powder detergent for short programs.
• Short programs do not include drying.
• To assist drying, we recommend slightly opening the door after a cycle is complete.
• You can access the product database where the model information is stored by reading the QR code on the energy label.
• NOTE: According to regulations 1016/2010 and 1059/2010, Eco program energy consumption values may differ. This table is in line with regulations 2019/2022 and 2017/2022.

CONTROL PANEL

1. On/Off button
2. Program Selection Button
3. Display
4. Delay Button
5. Half Load Button
   • i. Half Load Led
   • ii. Salt Indicator
   • iii. Rinse Aid Indicator

On/Off button
Switch the machine on by pressing On / Off button. When machine is on, “–” will be shown on the Display (3).

Program selection button
Select a suitable program for your dishes by pressing Program Selection button. The program will start automatically when the door is closed.

Display
The Display shows the number and total time of the selected program alternately and the remaining time during operation.

Delay Button
Press the Delay button to delay the start time of the selected program for 1 hour up to 19 hours. Pressing the button once delays the start time for 1 hour and continuing to press will increase the delay time. Press the Delay button to change or cancel  he delayed start. If you switch off the machine while delay timer is active, the delayed time is cancelled.

Half Load Button
Press the Half Load button to reduce the duration of the selected program, and therefore decrease your energy and water consumption. When Half Load option is selected, Half Load led (i) will illuminate.
NOTE: If you decide not to start the selected program, please see the “Changing a Program” and “Cancelling a Program” sections.
NOTE: When there is insufficient softening salt, the Salt Lack Warning Indicator (ii) will illuminate to indicate the salt chamber needs filling.
NOTE: When there is insufficient rinse aid, the Rinse Aid Lack Warning Indicator (iii) will illuminate to indicate the rinse aid chamber needs filling.

Changing a Program
Follow the steps below if you would like to change the program while in operation.

NOTE: Open the door slightly at first to avoid water spillage if you wish to stop the wash program before it is complete.

Cancelling a Program
Follow the steps below if you would like to cancel a program while in operation.

Switching the Machine Of

NOTE: Do not open the door before the program is complete.
NOTE: If the door of the machine is opened or the power is cut off while a program is in operation, the program will continue when the door is closed or the power returns.
NOTE: If the power is cut or the machine door is opened during the drying process, the program will terminate. Your machine will now be ready for a new program selection.

Buzzer Sound Control
To change the buzzer sound level, follow the below steps:

1. Open the door and press Program (2) and Delay (4) buttons simultaneously for 3 seconds.
2. When sound setting is recognized, buzzer gives a long sound and machine will display last set level, from “S0” to “S3”.
3. To decrease sound level press Program button (2). To increase sound level, press Delay button (4).
4.  To save the selected sound level, turn off the machine.’’S0’’ level means all voices are off. Factory setting is “S3”.

CLEANING AND MAINTENANCE

Cleaning your dishwasher is important to maintain the machine’s service life Make sure that the water softening setting (If available) is done correctly and correct amount of detergent is used to prevent limescale accumulation. Refill the salt compartment when the salt sensor light comes on.
Oil and lime may build up in your Dishwasher over time. If this occurs:

• Fill the detergent compartment but do not load any dishes. Select a program which runs at high temperature and run the Dishwasher empty. If this does not clean your Dishwasher sufficiently, use a cleaning agent designed for use with dishwashers.
• To extend the life of your dishwasher, clean the appliance regularly on each month.
• Wipe the door seals regularly with a damp cloth to remove any accumulated residue.

Cleaning machine and filters
Clean the filters and spray arms at least once a week. If any food waste remains on the coarse and fine filters, remove them, and clean them thoroughly with water.

• Micro Filter
• Coarse Filter
• Metal Filter

To remove and clean the filter combination, turn it counterclockwise and remove it by lifting it upwards (1). Pull the coarse filter out of the micro filter (2). Then pull and remove the metal filter (3). Rinse the filter with lots of water until it is free of residue. Reassemble the filters. Replace the filter insert and rotate it clockwise (4).

• Never use your Dishwasher without a filter.
• Incorrect fitting of the filter will reduce the washing effectiveness.
• Clean filters are necessary for proper running of the machine.

Spray arms
Make sure that the spray holes are not clogged, and that no food waste is stuck to the spray arms. If there is any clogging, remove the spray arms and clean them under water. To remove the upper spray arm, undo the nut holding it in position by turning it clockwise and pulling it downwards. Make sure that the nut is properly tightened when refitting the upper spray arm.

Drain Pump
Large food residues or foreign objects which were not captured by the filters may block the waste water pump. The rinsing water will then be above the filter.

Warning Risk of cuts!
When cleaning the waste water pump, ensure that you do not injure yourself on pieces of broken glass or pointed implements.
In this case:

1. First, always disconnect the appliance from the power supply.
2. Take out baskets.
3. Remove the filters.
4. Scoop out water, use a sponge if required.
5. Check the area and remove any foreign objects.
6. Install filters.
7. Re-insert baskets.

TROUBLESHOOTING

__

__

__

__

__

__

The program does not start.

| Your Dishwasher is not plugged in.| Plug your Dishwasher in.
__

Your Dishwasher is not switched on.

| __

Switch your Dishwasher on by pressing the

On/Off button.

Fuse blown.| Check your indoor fuses.
Water inlet tap is closed.| Turn on the water inlet tap.
Your Dishwasher door is open.| Close the Dishwasher door.
__

Water inlet hose and machine filters are clogged.

| __

Check the water inlet hose and machine filters and make sure they are not clogged.

__

__

__

Water remains inside the machine.

| __

Water drain hose is clogged or twisted.

| __

Check the drain hose, then either clean

or untwist it.

---|---|---
The filters are clogged.| Clean the filters.
The program is not finished yet.| Wait until the program is finished.
__

Machine stops during washing.

| Power failure.| Check mains power.
Water inlet failure.| Check water tap.
__

Shaking and hitting noises are heard during a wash operation.

| __

The spray arm is hitting the dishes in the lower basket.

| __

Move or remove items blocking the

spray arm.

__

__

__

__

__

__

__

__

Partial food wastes remain on the dishes.

| __

Dishes placed incorrectly, sprayed water not reaching affected dishes.

| __

Do not overload baskets.

__

Dishes leaning each another.

| __

Place dishes as instructed in the section on

loading your dishwasher.

__

Not enough detergent used.

| __

Use the correct amount of detergent, as instructed in the program table.

__

Wrong wash program selected.

| __

Use the information in the program table to select the most appropriate program.

__

Spray arms clogged with food waste.

| __

Clean the holes in the spray arms with

thin objects.

__

Filters or water drain pump clogged or filter misplaced.

| __

Check the drain hose and filters are

correctly fitted.

__

__

__

__

__

Whitish stains remain on dishes.

| __

Not enough detergent used.

| __

Use the correct amount of detergent, as instructed in the program table.

__

Rinse aid dosage and/or water softener setting set too low.

| __

Increase rinse aid and/or water

softener level.

High water hardness level.| Increase water softerner level and add salt.
__

Salt compartment cap not closed properly.

| __

Check that the salt compartment cap

is closed properly.

__

__

Dishes do not dry.

| Drying option is not selected.| Select a program with a drying option.
Rinse aid dosage set too low.| Increase rinse aid dosage setting.
__

__

__

__

__

__

Rust stains form on the dishes.

| __

Stainless-steel quality of the dishes is insufficient.

| __

Use only dishwasher-proof sets.

__

High level of salt in wash water.

| __

Adjust the water hardness level using

water hardness table.

__

Salt compartment cap not closed properly.

| __

Check that the salt compartment cap

is closed properly.

__

Too much salt spilled in the Dishwasher while filling it with salt.

| __

Use funnel while filling salt to the compartment to avoid

spillage.

A poor mains grounding.| Consult a qualified electrician immediately.
__

Detergent remains in the detergent compartment.

| __

Detergent was added when the detergent compartment was wet.

| __

Make sure detergent compartment is

dry before use.

AUTOMATIC FAULT WARNINGS AND WHAT TO DO

TROUBLE CODE

| ****

POSSIBLE FAULT

| ****

WHAT TO DO

---|---|---

FF

| ****

Water inlet system failure

| Make sure the water inlet tap is open and water is flowing.

Separate the inlet hose from the tap and clean the filter of the hose.

Contact for service if the error continues.

F5| Pressure system failure| Contact service.

F3

| Continuous water input| ****

Close the tap and contact for service.

F2

| ****

Inability to discharge water

| Water discharge hose and filters may be clogged.
Cancel the program.
If the error continues, contact for service.
F8| Heater error| Contact service.

F1

| ****

Overflow

| Unplug the machine and close the tap.
Contact service.
FE| Faulty electronic card| Contact service.
F7| Overheating| Contact service.
F9| Divisor position error| Contact service.
F6| Faulty heater sensor| Contact service.
HI| High voltage failure| Contact service.
LO| Low voltage failure| Contact service.

PRACTICAL INFORMATION

1. When the machine is not in operation:
   • Disconnect the plug and close the tap.
   • Leave the door slightly open to prevent odor formation.
2. Select the dry option to remove water droplets.
3. Place dishes in the machine properly to achieve the best energy consumption, washing and drying performance. Please see the program and consumption table for more information.
4. Rinse dirty dishes before placing them in the dishwasher.
5. Only use the Prewash program when necessary.
6. Do not place the machine near a refrigerator because it will reach high temperatures.
7. If the machine is in an area that is at risk of freezing, close the tap, disconnect the inlet hose from the tap and drain the water inside the hose and the machine completely.

CUSTOMER CARE AND SERVICE

Always use original spare parts. When contacting our Authorized Service Centre, ensure that you have the following data available: Model and Serial Number. The information can be found on the rating plate. Subject to change without notice.

TECHNICAL DATA

The technical information is situated in the rating plate on the internal side of the appliance and on the energy label. The QR code on the energy label supplied with the appliance provides a web link to the information related to the performance of the appliance in the EU EPREL database. Keep the energy label for reference together with the user manual and all other documents provided with this appliance. It is also possible to find the same information in EPREL using the link https://eprel.ec.europa.eu and the model name and product number that you find on the rating plate of the appliance. To access information about your product in the EPREL portal, you can scan the codes below:

Thank you for purchasing this product. If you need support with your product, visit our website using the links below.
Get User manuals : www.framelectrocasnice.ro
Get Service information : www.framelectrocasnice.r

Environment-friendly disposal

You can help protect the environment! Please remember to respect the local regulations: hand in the non-working electrical equipment’s to an appropriate waste disposal center. FRAM is a registered trademark of Network One Distribution SRL. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from NETWORK ONE DISTRIBUTION. Copyright © 2013 Network One Distribution. All rights reserved. www.framelectrocasnice.ro; www.framappliances.com; www.nod.ro This product is in conformity with norms and standards of European Community.

Importer: Network One Distribution
Marcel Iancu, 3-5, Bucharest, Romania
Tel: +40 21 211 18 56, www.framelectrocasnice.ro, www.nod.ro

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>