Apps Steinel CAM App Installation Guide

Apps Steinel CAM App Installation Guide

Steinel CAM App Installations Guide

1. Installing the Steinel CAM App

The Steinel CAM App can be installed on the following operating systems:
– Apple iOS (min. iOS 9.3 – iPhone 5s)
– Android (min. Android 5.0.1 – Samsung Galaxy S4)

Alternative:

• Scan the QR code in.
• Search for “Steinel CAM” in the Play Store (Android) or in the AppStore (Apple).
• Download Steinel CAM app.

2. Mounting and booting the device

• Mount the device in the desired position in accordance with the operating instructions.

• Open the Status LED cover.
  ➔ Device operating instructions.

• Establish electrical supply:
  – The device boots up.
  – The light comes on.
  – Acoustic signal every 4 seconds.
  – Status LED flashes red.

3. Starting the Steinel CAM App

• Establish a connection to the WLAN network via smartphone.
• Start the Steinel CAM App.
  The device and the smartphone or tablet must be connected to the same WLAN network.

4. Adding the Steinel CAM

• When installing a new device for the first time, click on the large “+” symbol.
  The device is equipped with a very powerful WLAN network antenna. The device WLAN network range will be greater than the smartphone or tablet.

• Hold the smartphone or tablet close to the router during configuration.

5. Establishing network access

• When installing a new device for the first time, click on the large “+” symbol.

The device is equipped with a very powerful WLAN network antenna. The device WLAN network range will be greater than the smartphone or tablet.

• Hold the smartphone or tablet close to the router during configuration.

• Enter the WLAN network router password in the Steinel CAM App.   Click on the eye symbol to make the password visible.

• Check the password.

• Click on “Continue”.

6. Connecting the device to the network

While the device and WLAN router are connecting:
– Acoustic signal sounds every second.
– Status LED flashes green in rapid succession. Once the smartphone or tablet is connected with the device:
– “Acoustic melody” sounds.
– Status LED slowly flashes green.

If the configuration process fails:

• Check and rule out each of the possible causes of error specified in the Steinel CAM App. Restart the installation process:
• Wait until the device starts to issue acoustic signals every 4 seconds again.
• Repeat the process starting with “Adding the Steinel CAM” (Fig. 4.1).

7. Configuring the device

Once the connection has been established successfully,
the user interface will be displayed.

• Play back live image.
• Assign a password for the device.
• Confirm the password.

The device password must contain at least 8 characters and include one letter and one number.

8. Device ready for operation

The device is ready for use.

STEINEL Vertrieb GmbH

Dieselstraße 80-84
33442 Herzebrock-Clarholz
Tel: +49/5245/448-188
www.steinel.de

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>