AIRHOGS TRY943 Air Hogs Super Soft Jump Fury with Zero Damage Wheels User Manual

AIRHOGS TRY943 Air Hogs Super Soft Jump Fury with Zero Damage Wheels

Production Notes
Artwork serial (docket) :
T44648_0002_20130280_GML_IS_R3(ARH_Jumpfury_F21) Visual Branding Designer / Date:
Cary Wang (04-12-2021)

•  This contract proof is simulated ISO-G7 printing on CCNB.
• CMYK color on printing must closely matching to this sheet.
•  Pantone color must closely matching to Pantone book.
•  Print sample standard viewing condition is 5000°K light booth.
•  Screen ruling 175 lpi or above.
•  Die-line may slightly different from latest development, check with product vendor or Spin Master.
• Die-line, placement line and placement indicator do not print.

CONFIDENTIAL / UNAUTHORIZED USE PROHIBIT

Country of Orig in – Placement
Factory according to production country to print Country of Origin (COO)
If corresponding country is not in below, contact Spin Master to provide translation

For in-depth video instructions go to AIRHOGS.COM/JUMPFURY

UK – 0800 206 1191, serviceuk@spinmaster.com
IRELAND – 1800 992 249

NORTH AMERICA • AMÉRIQUE DU NORD
1-800-622-8339, customercare@spinmaster.com

WWW.SPINMASTER.COM

CAUTION: Hair Entanglement. Tie back and cover hair and secure loose clothing prior to play.

WARNING: CHOKING HAZARD – Small parts. Not suitable for children under three years.

WARNING: Do not aim at eyes or face.

Spin Master logo & © Spin Master Ltd. All rights reserved. Spin Master Ltd. reserves the right to discontinue the www.AIRHOGS.com/JUMPFURY website at any time.

• JUMP BUTTON

• JUMP READY LIGHT

• and on right side is DRIFT ADJUSTER BUTTONS

• CHARGING PORT

• CHARGING LED

• POWER SWITCH

CONTENTS

• 1 controller
• 1 USB Charging Cable
• 1 Instruction Guide

  CAUTION:
HAIR ENTANGLEMENT
Tie back and cover hair and secure loose clothing prior to play.

HOW TO INSTALL BATTERIES

HOW TO CHARGE

HOW TO CONNECT THE CONTROLLER

Spin Master International B.V. hereby declares that the radio equipment type JUMP FURY™ is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://doc.spinmaster.com

• Keep away from obstacles and electrical hazards.
• Frequency band(s) : 2.422 – 2.467 GHz / Maximum radio-frequency power transmitted: <10 dBm
• Before first use: Read the user’s information together with your child.
• Retain this information, addresses and phone numbers for future reference.
• Do not change or modify anything on the toy.

HOW TO JUMP

HOW TO DRIVE

HOW TO CORRECT WHEEL ALIGNMENT

HOW TO INSTALL BATTERIES

1. Press down on release button (A) to slide down battery cover (B).
2. Install new batteries as shown in the polarity diagram (+/-) inside the battery compartment.
3. Replace battery door securely. Check your local laws and regulations for correct recycling and/or battery disposal.

HOW TO CHARGE

1. Turn the vehicle off.
2. Plug the small end of the charging cable into the charging port.
3.  Plug the charging cable into a 5V DC computer outlet.
4. Blinking LED indicates battery is charging, solid ON for fully charged.

HOW TO CONNECT THE CONTROLLER

1. Turn on the vehicle and place it on a flat surface.
2. Hold the controller near your Jump Fury™, press the power button and wait until the power light stops flashing.
3. You are ready to drive.
4. Use the remote control to drive.

CONTROLLER NOT CONNECTING
If your vehicle does not connect to the controller the first time, turn the vehicle off, remove batteries from the controller, put the batteries back in and repeat the HOW TO CONNECT THE CONTROLLER instructions.

HOW TO JUMP

1. Press the JUMP BUTTON once to load a jump. The JUMP FURY™ will begin loading a jump. (Loading takes approximately 7 – 10 seconds).

2. When the JUMP READY LIGHT is solid ON the JUMP FURY™ is ready to jump.
   NOTE: If the Jump Ready Light is blinking and the mechanism is fully loaded but not jumping, move the vehicle to a flatter surface.

3. Press the JUMP BUTTON on the controller to launch the JUMP FURY™.

Safety Precautions

• Keep hands, hair and loose clothing away from the motor / wheels when power switch is turned ON.

• Remove batteries when not in use.

• Parental guidance is recommended for the play.

• Keep your toy in your sight so that you can supervise it all the time.

• New alkaline batteries are recommended to obtain maximum performance.

• Users should keep strict accordance with the instruction manual while operating the product.
  Note: Parental guidance is recommended when installing or replacing batteries.

• Under the environment with electrostatic discharge, the toy may malfunction and require user to reset the toy.

CARE AND MAINTENANCE

Always remove batteries from the controller when it is not being used for a long period of time. Wipe the toy gently with a clean damp cloth. Keep the toy away from direct heat. Do not submerge the toy in water. This can damage the electronic assemblies.

BATTERY SAFETY INFORMATION

• Batteries are small objects. Replacement of batteries must be done by adults. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the toy.
• Dispose of used batteries properly. Remove batteries for prolonged storage. Only batteries of the same or equivalent type as recommended are to be used.
• DO NOT incinerate used batteries.
• DO NOT dispose of batteries in fire, as batteries may explode or leak.
• DO NOT mix old and new batteries or types of batteries (i.e. alkaline/standard/rechargeable). Using rechargeable batteries is not recommended due to possible reduced performance. Rechargeable batteries are only to be charged under adult supervision. Replaceable-rechargeable batteries are to be removed from the toy before being charged.
• DO NOT recharge non-rechargeable batteries.
• DO NOT short-circuit the supply terminals.

SPECIAL LiFe BATTERY INSTRUCTIONS: Never charge battery unattended. – Charge battery in an isolated area. Keep away from flammable materials. – Do not expose to direct sunlight. There is a risk of the batteries exploding, overheating, or igniting. – Do not disassemble, modify, heat, or short circuit the batteries. Do not place them in fires or leave them in hot places. – Do not drop or subject to strong impacts. – Do not allow the batteries to get wet. – Only charge the batteries with the specified Spin Master™ battery charger. – Only use the batteries in the device specified by Spin Master™. – Carefully read the instruction guide and use the batteries correctly. – In the unlikely event of leakage or explosion use sand or a chemical fire extinguisher for the battery. – Batteries must be recycled or disposed of properly.
AIRHOGS.COM/JUMPFURY

FCC STATEMENT: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for Class B digital devices pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference to radio communications. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication.

However, there is no guarantee that interference will not occur in a particular installation. If this toy does cause interference to radio or television reception (you can check this by turning the toy off and on while listening for the interference), one or more of the following measures may be useful: • Reorient or relocate the receiving antenna

• Increase the separation between the toy and the radio or the TV
• Consult the dealer or an experienced TV-radio technician for help.

NOTE: Changes, adjustments or modifications to this unit, including but not limited to, replacement of any transmitter component (crystal, semiconductor, etc) could result in a violation of FCC rules under part 15 and/or 95 and must be expressly approved by Spin Master Ltd or they could void the user’s authority to operate the equipment. Spin Master Inc., PMB #10053, 300 International Drive, Suite 100, Williamsville, NY 14221. To contact the responsible party please visit fcc.spinmaster.com
Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>