SHARP PN-HY551 Ultra HD LCD Monitor Instruction Manual
- June 6, 2024
- Sharp
Table of Contents
SHARP PN-HY551 Ultra HD LCD Monitor
Scope
This document describes dismantling instruction according to Annex VII of
Directive 2012/19/EU.
Tools for dismantling
Below tools are required to dismantle this product.
- Screw Driver
- Nipper
Dismantle Procedure
This product can be dismantled by below steps.
- Remove Back covers (section 4)
- Remove Printed circuit boards (section 5)
- Remove Battery (section 6)
- Dismantle LCD (section 7)
- Remove Electrolyte Capacitors (section 8)
Back covers
The back cover can be removed by a screwdriver.
Printed circuit boards
All PWBs can be removed by a screwdriver.
Battery
This model uses only an AAA battery for remote control. The battery can easily be removed.
LCD Module
LCD Dismantle procedure
- Remove Rear cover
- Remove PWBs
- Remove the Cables
Capacitors
Electrolyte Capacitors whose diameter/height is larger than 25mm is installed
on Power PWB.
These capacitors can be removed by using a nipper to cut the leads.
Parts List
Parts described in Annex VII of directive 2012/19/EU are as below.
parts notes
- LCD: 55inch LCD module
- Printed Circuit Boards: Main I/F PWB: Power PWB: T-CON PWB
- Battery: AAA battery
- Electrolyte capacitors: (height >25mm, diameter >25mm): On Power PWB
- External electric cables 2 kinds of Power Cord: – for EU: – for the UK
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>