ADJ DOT903 DOTZ Par 100 RGB COB LED Par Light User Manual

DOT903 DOTZ Par 100 RGB COB LED Par Light
User Manual

©2021 ADJ Products, LLC all rights reserved. Information, specifications, diagrams, images, and instructions herein are subject to change without notice. ADJ Products, LLC logo and identifying product names and numbers herein are trademarks of ADJ Products, LLC. Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted. Product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. All non-ADJ Products, LLC brands, and product names are trademarks or registered trademarks of their respective companies.
ADJ Products, LLC and all affiliated companies hereby disclaim any and all liabilities for property, equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic loss associated with the use or reliance of any information contained within this document, and/or as a result of the improper, unsafe, insufficient and negligent assembly, installation, rigging, and operation of this product.

DOCUMENT VERSION

Due to additional product features and/or enhancements, an updated version of this document may be available online.
Please check www.adj.com for the latest revision/update of this manual before beginning installation and/or programming.

https://qrs.ly/2vbr0rs

Date| Document
Version| Software
Version| DMX Channels| Notes
---|---|---|---|---
09/2020| 1.0| 1.0| 3 / 4 / 5 / 9 Channels| Initial Release.
10/25/2021| 1.1| 1.10| No Change| Updated Formatting

Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to helping to protect the environment. Please turn off all electrical products when they are not in use. To avoid power consumption in idle mode, disconnect all electrical equipment from power when not in use. Thank you!

INTRODUCTION

Unpacking: Thank you for purchasing the Dotz Par 100 by ADJ Products, LLC. Every Dotz Par 100 has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your fixture for any damage and be sure all accessories necessary to operate the unit have arrived intact. In the event that damage has been found or parts are missing, please contact our toll-free customer support number for further instructions. Do not return this unit to your dealer without first contacting customer support.
Introduction: The Dotz Par 100 is part of ADJ’s continuing pursuit of creating high-quality affordable intelligent fixtures. The Dotz Par 100 is a high-performance, DMX intelligent, moving head LED fixture. This fixture is a great piece for retail stores, displays, mood, architecture, interior and exterior decoration, and clubs. This unit can be used as a stand-alone, or in a Primary/Secondary configuration. The unit can also be controlled via a DMX controller. This fixture is suitable for theaters, studios, retail stores, and other similar locations.

Customer Support: ADJ Products, LLC provides a toll-free customer support line to answer any questions that may arise during set up or initial operation. You may also visit us on the web at www.adj.com for any comments or suggestions. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m. Pacific  Standard Time.
Voice: 800-322-6337
Fax: 323-582-2941
E-mail: support@adj.com
To purchase parts online visit http://parts.adj.com.

Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.
CAUTION! There are no user-serviceable parts inside this unit. Do not attempt any repairs yourself, as doing so will void your manufacturer’s warranty. In the unlikely event your unit may require service, please contact ADJ Products, LLC.
Do not discard the shipping carton in the trash. Please recycle whenever possible.

GENERAL INSTRUCTIONS

Please read these operating instructions carefully to familiarize yourself with the basic operations of this unit. These instructions contain important safety information regarding the use and maintenance of this unit. Please keep this manual with the unit for future reference.

FEATURES

• RGB Color Mixing
• Strobing
• Electronic Dimming 0-100%
• Built-in Microphone
• DMX-512 protocol
• Four DMX Modes: 3 Channel Mode, 4 Channel Mode, 5 Channel Mode, & 9 Channel Mode
• 4 Operating Modes – Sound Active, Auto Run, Built-In Programs, or DMX Control
• Power Cord Daisy Chain Capability (see Power Cord Daisy Chain section of this manual)

WARRANTY REGISTRATION

The Dotz Par 100 carries a 2 year (730 days) limited warranty. Please fill out the enclosed warranty card to validate your purchase and warranty. You may also register your product online at our website: www.adj.com. All returned service items, whether under warranty or not, must be freight pre-paid and accompanied by a return authorization (R.A.) number. If the unit is under warranty, you must provide a copy of your proof of purchase invoice. Please contact ADJ Products, LLC customer support for an R.A. number.

SAFETY PRECAUTIONS

• To reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.
• Do not spill water or other liquids into or onto your unit.
• Be sure that the power outlet that is used matches the required voltage for your unit.
• Do not attempt to operate this unit if the power cord has been frayed or broken.
• Do not attempt to remove or break off the ground prong from the electrical cord. This prong is used to reduce the risk of electrical shock and fire in case of an internal short.
• Disconnect from main power before making any type of connection.
• Do not remove the cover for any reason. There are no user-serviceable parts inside.
• Never operate this unit with its cover removed.
• Never plug this unit into a dimmer pack.
• Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6” (15cm) between this device and a wall.
• Do not attempt to operate this unit if it has been damaged in any way.
• This unit is intended for indoor use only. The use of this product outdoors voids all warranties.
• During long periods of non-use, disconnect the unit from the main power.
• Always mount this unit in a safe and stable matter.
• Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to the point at which they exit from the unit.
• Cleaning – The fixture should be cleaned only as recommended by the manufacturer. See the Cleaning section of this manual for details.
• Heat – The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
• The fixture should be serviced by qualified service personnel when:
  A. The power-supply cord or the plug has been damaged.
  B. Objects have fallen onto, or liquid has been spilled into, the appliance.
  C. The appliance has been exposed to rain or water.
  D. The appliance does not appear to operate normally or exhibits a marked change in performance.

SETUP

Power Supply: The ADJ Dotz Par 100 contains an automatic voltage switch, which will automatically sense the voltage when it is plugged into a power source. With this switch, there is no need to worry about the correct power voltage, and this unit can be plugged in anywhere.
DMX-512: DMX is short for Digital Multiplex. This is a universal protocol used as a form of communication between intelligent fixtures and controllers. A DMX controller sends DMX data instructions from the controller to the fixture. DMX data is sent as serial data that travels from fixture to fixture via the DATA “IN” and DATA “OUT” XLR terminals located on all DMX fixtures (most controllers only have a DATA “OUT” terminal).
DMX Linking: DMX is a language allowing all makes and models of different manufacturers to be linked together and operate from a single controller, as long all fixtures and the controller are DMX compliant. To ensure proper DMX data transmission, try to use the shortest cable length possible when linking several DMX fixtures. The order in which fixtures are connected in a DMX line does not influence the DMX addressing. For example, a fixture assigned an MX address of 1 may be placed anywhere in a DMX line: at the beginning, at the end, or anywhere in the middle. When a fixture is assigned a DMX address of 1, the DMX controller knows to send DATA assigned to address 1 to that unit, no matter where it is located in the DMX chain.
Data Cable (DMX Cable) Requirements (For DMX Operation): The Dotz Par 100 can be controlled via DMX-512 protocol. The Dotz Par 100 has 4 DMX Channel Modes. The DMX  address is set on the rear panel of the Dotz Par 100. Your unit and your DMX controller require an approved DMX-512 110 Ohm Data cable for data input and data output (Figure 1). We recommend Accu-Cable DMX cables. If you are making your own cables, be sure to use standard 110-120 Ohm shielded cable (This cable may be purchased at almost all professional sound and lighting stores). Your cables should be made with a male XLR connector at one end and a female XLR connector at the other. Also, remember that DMX cable must be daisy-chained and cannot be split.

Notice: Be sure to follow figures two and three when making your own cables. Do not use the ground lug on the XLR connector. Do not connect the cable’s shield conductor to the ground lug or allow the shield conductor to come into contact with the XLR’s outer casing. Grounding the shield could cause a short circuit and erratic behavior.

Special Note: Line Termination. When longer runs of cable are used, you may need to use a terminator on the last unit to avoid erratic behavior. A terminator is a 90-120 ohm 1/4 watt resistor that is connected between pins 2 and 3 of a male XLR connector (DATA + and DATA -). This unit is inserted in the female XLR connector of the last unit in your daisy chain to terminate the line. Using a cable terminator (ADJ part number Z-DMX/T) will decrease the risk of erratic behavior.

5-Pin XLR DMX Connectors. Some manufacturers use 5-pin XLR connectors for DATA transmission in place of 3-pin. 5-pin XLR fixtures may be implemented in a 3-pin XLR DMX line. When inserting standard 5-pin XLR connectors into a 3-pin line, a cable adaptor must be used. These adaptors are readily available at most electric stores. The chart below details a proper cable conversion:

3-Pin XLR to 5-Pin XLR Conversion

Conductor| 3-Pin XLR Female (Out)| 5-Pin XLR Male (In)
Ground/Shield| Pin 1| Pin 1
Data Compliment (- signal)| Pin 2| Pin 2
Data True (+ signal)| Pin 3| Pin 3
Not Used| | Do Not Use
Not Used| | Do Not Use

SYSTEM MENU

Control Panel Lock: The control panel will lock itself after 30 seconds if nothing is pressed. To unlock the control panel, press the MODE button for 3 seconds.
DMX Mode – Set the DMX Address and DMX Channel Mode.

1. Press the MODE button until “AXXX” is displayed. “XXX” represents the currently set address.

2. Use the UP or DOWN buttons to change the DMX address.

3. After setting your DMX address press ENTER. You can now select your desired DMX channel mode. Use the UP or DOWN buttons to find your desired DMX channel mode, then press ENTER when you find your desired DMX channel mode.

4. After you press ENTER you can now set your dimmer curve. There are 5 dimmer curve settings.
   See Dimmer Curve below for the different curves. Select your desired dimmer curve setting and press ENTER.

5. After you press ENTER, you can set your NO DMX setting. This setting defines how the fixture will behave in the event that the DMX signal is lost or interrupted. Press ENTER when you are finished to return to the DMX address setting.

Dimmer Curve – This setting will let you select your desired dimmer curve.

1. Press the MODE button until “AXXX” is displayed. “XXX” represents the currently selected address.
2. Press the SETUP button until “dcXX” is displayed, then press ENTER.
3. 1 of 5 dimming curve settings will be displayed: Standard, Stage, TV, Architectural, or Theatre.
   Use the UP and DOWN buttons to select your desired dimming curve and press ENTER to confirm.

NO DMX – This mode can be used as a precaution mode and defines how the device will behave in the event that the DMX signal is lost, interrupted, or power is lost. You can also set this as the operating mode you would like the unit to return to when power is applied.

1. Press the MODE button until “AXXX” is displayed. “XXX” represents the currently selected address.

2. Press ENTER until one of the following is displayed; “Soun”, “blc”, or “Hold”. Use the UP or DOWN buttons to choose an operating mode you would like the unit to start up in when power is applied or the DMX signal is lost.
   • Soun (Sound) – If the DMX signal is lost, interrupted, the unit will automatically go into sound active mode.
   • blc (Blackout) – If the DMX signal is lost or interrupted, the unit will automatically go into stand-by mode.
   • Hold – If the DMX signal is lost the fixture will stay in the last DMX setting. If power is applied and this mode is set, the unit will automatically go into the last DMX set up.

3. Press ENTER to confirm your desired setup.

Secondary Mode – This will let you set your unit as a secondary unit in a primary/secondary configuration.

1. Press the MODE button until “SEcd” is displayed.
2. Your unit will now follow the Primary.

RGB Dimmer Mode – Select your desired color to remain static or adjust the RGB colors to create your desired color.

1. Plug the fixture in and press the MODE button until “Manual Dimmer” is displayed, then press ENTER.
2. When “r.XXX” is displayed you are in Red dimming mode. Press the UP and DOWN buttons to adjust intensity.
3. When “G.XXX” is displayed you are in Green dimming mode. Press the UP and DOWN buttons to adjust intensity.
4. When “b.XXX” is displayed you are in Blue dimming mode. Press the UP and DOWN buttons to adjust intensity.

Color Macro – Select your desired color macro to remain static.

1. Press the MODE button until “C-XX” is displayed. “XX” represents the currently selected macro number.
2. Use the UP and DOWN buttons to scroll through the 32 color macros until you find your desired color.

Built-In Programs – Select your desired Built-In program.

1. Press the MODE button until “P-XX” is displayed. “XX” represents the currently selected program number. Use the UP and DOWN buttons to scroll through 7 different programs.
2. Press ENTER to move through the various adjustments of each program and use the UP and DOWN buttons to make adjustments.

Sound Mode – In this mode the unit will run in sound active mode.

1. Press the MODE button until “Sound Mode” is displayed.
2. Use the UP and DOWN buttons to adjust the sound sensitivity. “0” is the least sensitive, and “30” is the most sensitive.

RF Active – This menu will let you activate the RF remote control.

1. Press the MODE button until “RFXX” is displayed, then press ENTER. “XX” represents the currently selected setting: either “on” or “off”.
2. Use the UP or DOWN buttons to activate (On) or deactivate (Off) the remote.

UNIVERSAL DMX CONTROL

This function allows you to use a universal DMX-512 controller to control the chases and patterns,
dimmer, and strobe. A DMX controller allows you to create unique programs tailored to your individual needs. The Dotz Par 100 has 4 DMX channel modes; a 3 Channel Mode, 4 Channel Mode, 5 Channel Mode, & 9 Channel Mode. See the DMX Traits section of this manual for detailed information.

• This function will allow you to control each individual fixture’s traits with a standard DMX 512 controller.
• To run your fixture in DMX mode, follow the directions in the Setup section of this manual to set your DMX address and DMX Channel mode.
• Plugin the fixture via the XLR connections to any standard DMX controller.
• For longer cable runs (more than 100 feet) use a terminator on the last fixture.

PRIMARY-SECONDARY CONFIGURATION

This function will allow you to link up to 16 units together and operate without a controller. The units will be sound-activated. In Primary-Secondary operation one unit will act as the controlling unit and the others will react to the controlling unit’s programs. Any unit can act as a Primary or as a Secondary.

1. Using approved DMX data cables, daisy chain your units together via the XLR connectors on the rear of the units. Remember that the male XLR connector is the input, and the female XLR connector is the output. The first unit in the chain (primary) will use the female XLR connector only and the last unit in the chain will use the male XLR connector only. For longer cable runs, we suggest using a terminator on the last fixture.
2. On the Primary unit, set your desired operating mode.
3. On the secondary units press the MODE button until “SEcd” is displayed.
4. The secondary units will now follow the Primary unit.

DOTZ PAR RF REMOTE

The Dotz Par 100 RF remote has many different functions and allows you to control your Dotz Par 100 remotely. The remote can control your system from a distance of up to 25 meters. To use the remote you must first activate the fixture’s receiver, as directed in the System Menu section of this manual.

BLACKOUT – Pressing this button will blackout the fixture.
FADE – This button will activate the color fade program.
COLOR – This button will activate the static color mode. Use the “+” and “-” buttons to scroll through the colors and find your desired color.
PROGRAMS – This button will activate the built-in programs mode. Use the “+” and “-” buttons to scroll through the 13 programs and find your desired program.
SOUND ACTIVE – This button activates sound active mode.
AUTORUN – This button will run an automatic program. Use the “+” and “-” buttons to adjust the speed of the autorun.
“+” and “-” – Use these buttons to adjust the speed of the AutoRun, scroll through the built-in programs, and scroll through the static colors.

DMX TRAITS

and Blue channels)
1| -7| | Bastard Amber
8| -15| | Medium Amber
16| -23| | Pale Amber Go J
24| -31| | Gallo Gold
32| -39| | Golden Amber
40| -47| | Light Red
48| -55| | Medium Red
56| -63| | Medium Pink
64| -71| | Broadway Pink
72| -79| | Follies Pink
80| -87| | Light Lavender
88| -95| | Special Lavender
96| -103| | Lavender
104| -111| | Indigo
112| -119| | Hemsley Blue
120| -127| | Tipton Blue
128| -135| | Light Steel Blue
136| -143| | Light Sky Blue
144| -151| | Sky Blue
152| -159| | Bnlhant Blue
160| -167| | Light Green Blue
168| -175| | Bnght Blue
176| -183| | Primary Blue
184| -191| | Congo Blue
192| -199| | Pale Yellow Green
200| -207| | Moss Green
208| -215| | Primary Green
216| -223| | Double CTB
224| -231| | Full Red
232| -239| | Full Green
| | CONTINUED ON NEXT PAGE
CHANNEL| DMX VALUES| FUNCTION
---|---|---
3CH| 4CH| 5CH| 9CH
| | | | | Color Macros (continued) (NOTE: Use of this channel disables the Red, Green, and Blue channels)
240 – 247| Full Blue
248 – 255| White
| | | | | Programs
000| Off
001 – 020| Color Fade/Change
021 – 040| 7 Color Change
041 – 060| 7 Color Fade
061 – 080| 3 Color Change
081 – 100| 3 Color Fade
101 – 120| Sound Active Color Fade
121 – 140| Sound Active Color Change
141 – 255| No Function
| | | | | Program Speed/Sound Sensitivity
000 – 255| Program Speed. slow to fast (when Programs channel is set between 001 – 100)
000 – 255| Sound Sensitivity. least to most sensitive (when Programs channel is set between 101 – 140)
| | | | | St robing
000 – 031| LED On
032 – 095| Strobe. slow to last
096 – 127| LED On
128 – 159| Pulse Strobe. slow to fast
160 – 191| LED On
192 – 223| Random Strobe, slow to fast
224 – 255| LED On
| | | | | Dimmer Curves
000 – 041| Standard
042 – 084| Stage
085 – 127| TV
128 – 170| Architectural
171 – 213| Theatre
214 – 255| Default to Unit Curve Setting

COLOR MACRO CHART

PHOTOMETRIC

DIMMER CURVE CHART

POWER CORD DAISY CHAINING

This feature allows the devices to be linked together via the power input and output sockets.
The maximum number of units that can be connected in this manner are as follows:

• 9 fixtures maximum with 120V power.
• 19 fixtures maximum with 230V power.

DO NOT EXCEED THIS MAXIMUM NUMBER.
All fixtures linked in this manner should be of the same make and model type. DO NOT mix and match fixture model types.

FUSE REPLACEMENT

Locate and remove the unit’s power cord. Once the cord has been removed, locate the fuse holder located inside the power socket. Insert a flat-head screw driver into the power socket and gently pry out the fuse holder. Remove the bad fuse and replace with a new one. The fuse holder has a built-in socket for a spare fuse, so be careful not to confuse the spare fuse with active fuse.

CLEANING

Due to fog residue, smoke, and dust, cleaning of the internal and external optical lenses must be carried out periodically to optimize light output.
Use a soft cloth to wipe down the outside casing. Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke, fog residue, dust, dew).

TROUBLESHOOTING

Listed below are a few common problems the user may encounter, with solutions.
Unit not responding to DMX:
Check that the DMX cables are connected and widely correctly (pin 3 is “hot”; on some other DMX devices, pin 2 may be “hot”). Check that all cables are connected to the correct connectors in the correct order. The way in which the input and output are connected can affect the operation of the device.
The unit does not respond to sound:
Quiet or high-pitched sounds will not activate the unit.
If problems are not resolved, contact ADJ Products, LLC for service. 1-800-322-6337

LIMITED WARRANTY (USA ONLY)

A. ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products, LLC products to be free of manufacturing defects in material and workmanship for a prescribed period from the date of purchase (see specific warranty period on reverse). This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable evidence, at the time service is sought.
B. For warranty service, you must obtain a Return Authorization number (RA#) before sending the product back—please contact ADJ Products, LLC Service Department at 800-322-6337. Send the product only to the ADJ Products, LLC factory. All shipping charges must be prepaid. If the requested repairs or service
(including parts replacement) are within the terms of this warranty, ADJ Products, LLC will pay return shipping charges only to a designated point within the United States. If the entire instrument is sent, it must be shipped in its original package and packaging material. No accessories should be shipped with the product. If any accessories are shipped with the product, ADJ Products, LLC shall incur no liability whatsoever for loss of or damage to any such accessories, nor for the safe return thereof.
C. This warranty is void if the product serial number and/or labels are altered or removed; if the product is modified in any manner which ADJ Products, LLC concludes, after inspection, affects the reliability of the product; if the product has been repaired or serviced by anyone other than the ADJ Products, LLC factory unless prior written authorization was issued to purchaser by ADJ Products, LLC; if the product is damaged because it was not properly maintained as set forth in the product instructions, guidelines and/or user manual.
D. This is not a service contract, and this warranty does not include maintenance, cleaning, or periodic checkup. During the period specified above, ADJ Products, LLC will replace defective parts at its expense with new or refurbished parts, and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship. The sole responsibility of ADJ Products, LLC under this warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole discretion of ADJ Products, LLC. All products covered by this warranty were manufactured after August 15,  2012, and bear identifying marks to that effect.
E. ADJ Products, LLC reserves the right to make changes in design and/or improvements upon its products without any obligation to include these changes in any products theretofore manufactured.
F. No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with products described above. Except to the extent prohibited by applicable law, all implied warranties made by ADJ Products, LLC in connection with this product, including warranties of merchantability or fitness, are limited in duration to the warranty period set forth above. And all warranties, whether expressed or implied, including warranties of merchantability or fitness, are limited in duration to the warranty period set forth above. The consumer’s and/or dealer’s sole remedy shall be such repair or replacement as is expressly provided above; and under no circumstances shall ADJ Product, LLC be liable for any loss and/or damage, direct and/or consequential arising out of the use of, and/or inability to use this product.
G. This warranty is the only written warranty applicable to ADJ Products, LLC products, and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published.
MANUFACTURER’S LIMITED WARRANTY PERIODS:

• Non-LED Lighting Products = 1-Year (365 Days) (Including Special Effect Lighting, Intelligent Lighting, UV lighting, Strobes, Fog Machines, Bubble Machines, Mirror Balls, Par Cans, Trussing, Lighting Stands, Power/Data Distribution, etc. excluding LED and lamps)
• Laser Products = 1-Year (365 Days) (excluding laser diodes which have a 6-Month Limited Warranty)
• LED Products = 2-Year (730 Days) (excluding batteries which have a 180 Day Limited Warranty)
• NOTE: 2-Year (730 Days) Limited Warranty ONLY applies to products purchased within the United States.  StarTec Series = 1-Year (365 Days) (excluding batteries which have a 180 Day Limited Warranty)
• ADJ DMX Controllers = 2 Year (730 Days)
• American Audio Products = 1 Year (365 Days)

SPECIFICATIONS

Voltage: 100V – 240V, 50Hz/60Hz
LEDs: 1 x 100W COB Tri LEDs
Power Draw: 115W
Beam Angle: 25Degrees
80 Degrees (w/o Lens Cover)
Fuse: 2 Amp (125V)
1 Amp (250V)
Power Cord Daisy Chain: 9 Fixtures Max (120V)
19 Fixtures Max (230V)
Weight: 6.8 Lbs / 3.1 Kgs
Dimensions: 201 x 120 x 201mm (w/o Bracket)
10” (L) x 5” (W) x 11.25” (H)
255 x 130 x 284mm (with Bracket)
Colors: RGB Color Mixing
DMX Channels: 4 DMX Modes: 3-, 4-, 5-, & 9-Channel Mode
Working Position:  Any Safe Working Position
Warranty:  2 Year (730 days)
Approvals: CE

Auto-Sensing Voltage: This fixture contains an automatic voltage switch, which will automatically sense the voltage when it is plugged into the power source.
Please Note: Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice.

ADJ Products, LLC
6122 S. Eastern Ave. Los Angeles, CA 90040 USA
Tel: 323-582-2650 / Fax: 323-725-6100
Web: www.adj.com / E-mail: info@adj.com
A.D.J. Supply Europe B.V.
Junostraat 2
6468 EW Kerkrade
Netherlands
service@adjgroup.eu / www.adj.eu
Tel: +31 45 546 85 00 / Fax: +31 45 546 85 99

Follow Us!

Facebook.com/adjlighting
YouTube.com/adffighting

Twitter.com/adjlighting
Instagram: adj_lighting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>