CHAMPION 201049 4500W Open Frame Inverter Generator User Guide
- June 6, 2024
- Champion
Table of Contents
201049 4500W Open Frame Inverter Generator
User Guide
Set Up / Montaje
Open shipping carton. Assembly > Unboxing
Remove brackets. Assembly > Remove Shipping Support Brackets.
Add oil. Assembly > Add Engine Oil.
Recommended: 10W-30, up to 18.6 fl. oz. (550 ml) DO NOT overfill.
MAKE SURE SHIPPING BRACKETS ARE REMOVED BEFORE ADDING OIL.
Move the generator outdoors.
Move generator to an open, outdoor area.
Point exhaust away. Never run a generator in enclosed areas (e.g., not in
house or garage).
Keep all objects at least 5 feet (1.5 m) from the generator. Heat from the muffler and exhaust gas can ignite combustible materials.
Start-Up
Add fuel. Assembly > Add Fuel
DO NOT use E15 or E85.
DO NOT plug in any electrical devices.
NEVER START OR STOP THE GENERATOR WITH ELECTRICAL DEVICES CONNECTED OR TURNED ON!
Turn the EZ Start dial to the “CHOKE” position.
Pull the recoil to start the engine.
Turn the EZ Start dial to the “ON” position.
Plugin. Operation > Connecting Electrical Loads.
Visit our YouTube channel to watch our how-to videos and subscribe to view our latest videos on our Champion Power Equipment products!
WARNING:
Read the ENTIRE operator’s manual to become familiar with the features of the
product before operating.
Failure to operate the product correctly can result in damage to the product,
personal property and cause serious injury or even death.
NEED ASSISTANCE OR HAVE A QUESTION?
GIVE US A CALL.
1-877-338-0999
CHAMPIONPOWEREQUIPMENT.COM