LUXPRO XP915 Rechargeable LED Flashlight User Manual
- June 6, 2024
- LUXPRO
Table of Contents
LUXPRO XP915 Rechargeable LED Flashlight
Features
- Constructed with aircraft-grade aluminum
- LPE optics
- Patented TackGrip molded rubber grip
- Rear tactical on/off button
- 2×18650 2000mAh Li-ion rechargeable batteries
- Micro USB charge port access via rotating dial (USB cable included)
Operation Instructions
On/Off: Press and release the button on the tail cap to turn the light on and off.
Cycle Modes: Press button on tail cap quickly to cycle through modes
(High/Medium/Low). If light remains in a single mode for longer than 3-5
seconds, the next press of the button will turn the light off.
Light automatically resets to High mode when turned off.
Hidden Strobe On/Off: Press and hold the button for 3 seconds to activate hidden strobe. Flashlight will remain in hidden strobe mode until it is deactivated by pushing and holding the button for 3 seconds again.
Charging Instructions
To charge the flashlight, reveal the charge port on the tail end of the light by rotating the charge port cover to the left.
Plug the small end of the Micro-USB charging cable (included) into the port on the flashlight. Plug the opposite end of the charging cable into a 5V USB power source.
The indicator light near the charge port will be red while the light is charging, then turn green to indicate the battery is fully charged.
Rechargeable battery is sealed and replacement is not necessary.
The XP915 has a charge time of approximately 3 hours.
Product Warranty
The XP915 has a Limited Lifetime Warranty Against Manufacturer’s Defects from
time of purchase.
For warranty claims please contact us by calling
801-553-8886 or sending an email to
info@simpleproducts.com
luxpro.com
14725 S Porter Rockwell Blvd Ste C Bluffdale, UT 84065
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>