SKYZONE SKY04L LCOS 5.8GHz 48CH Steadyview Receiver User Manual

SKYZONE SKY04L LCOS 5.8GHz 48CH Steadyview Receiver

Specifications

Specifications

SKY04L
Screen| LCOS
Resolution 1280X960
FOV（Diagonal）| 39°
Aspect Ratio 4:3/16:9
Focus| -6~+6 adjustable
Interpupillary distance (IPD) 58-71mm
Receiver| 5.8Ghz 48CH SteadyView Receiver
Language                                                            10 Languages

BAND/CHANNEL table

BAND/CH table

BAND/CH| CH 1| CH2| CH3| CH4| CH5| CH6| CH7| CH8
A| 5865M| 5845M| 5825M| 5805M| 5785M| 5765M| 5745M| 5725M
B| 5733M| 5752M| 5771M| 5790M| 5809M| 5828M| 5847M| 5866M
E| 5705M| 5685M| 5665M| 5645M| 5885M| 5905M| 5925M| 5945M
F| 5740M| 5760M| 5780M| 5800M| 5820M| 5840M| 5860M| 5880M
R| 5658M| 5695M| 5732M| 5769M| 5806M| 5843M| 5880M| 5917M
L| 5362M| 5399M| 5436M| 5473M| 5510M| 5547M| 5584M| 5621M
Sensitivity| -98dBm±1dBm
Antenna port| 2 X SMA-K,50ohm

Package Included

1. Goggles*1
2. Receiver Module*1
3. Faceplate*2(wide and narrow)
4. Sponge with velcro*1
5. Zipper case*1
6. Power cable*1
7. Head tracker cable*1
8. 5.8GHz 2dB antennas*2
9. Video/Audio Cable*1
10. USB-C Cable*1
11. User Manual*1

Diagram

1. DC PORT(5.5*2.1mm)
2. USB C port
3. Focus adjustment wheel
4. SD card slot
5. Earphone jack
6. Head tracker port
7. IPD Slider
8. DMI input
9. AV IN/OUTPUT
10. Record/Delete
11. CH/BAND/Search/Brightness
12. Volume/ Mode/Drone Finder
13. System Menu/Headtracker
14. Power/Fan

Introduction

The SKY04L is lite version(also LCOS version) of the SKY04 series. with focus adjustment, 1280*960 high-resolution LOCS screen, the screen have vivid color , pilot can see more details in the racing .
With a steady view receiver, the receiver merge two signals to one, avoid image tearing and rolling, make image more stable and clear in challenging condition. The new designed optics have focus adjustment feature and a 39-degree field of view, give pilots more immersive FPV experience. The new OS with 10 languages to set select, pilot have no trouble with the menu system, with shuttle wheel and new user interface, pilot can set all the settings just by rolling the wheel without taking off the goggle.

• Diversity
• SteadyView

DO NOT EXPOSE THE LENS DIRECT TO SUNLIGHT, OTHERWISE, THE SCREEN WILL BURN IN.

Quick Start Guide

1. Install the antenna and faceplate.
2. Use power cables to connect battery to the goggles, goggles can power by 2~6cell lipo battery, hold the power button to turn on.
3. Focus adjustment: move the focus adjustment wheel to focus, close one eye to adjust the focus, you can pop up the OSD menu as the template, when the image is clear, repeat the process with the other eye.
4. IPD adjustment: move the IPD slider until there is no double vision of the image.

Band /Channel / Receiver mode setting

1. Press the right wheel, then roll right wheel to change channel, press the wheel again switch to Band setting mode, then roll the wheel to change the Band. Press wheel again to select diversity or Mix mode .
2. No wheel operation for 3 seconds，RF setting will quit the channel setting mode.
3. Hold the right wheel to pop up search menu, press the right wheel to start auto search, after searching all the frequency, receiver will work on the strongest signal. Roll the right wheel to manually select the channels, hold the right wheel to quit searching.

Some camera on market didnt follow standard NTSC/PAL signal, cause the receiver confusing in Mix mode, It will cause image getting dark, color distortion, rolling image, user can switch to diversity mode to solve this issue. Sometime the auto search channel is not accurate, user may need manually select the channel.

Volume Setting

• In all mode preview mode, roll the left wheel to adjust the volume.
• Volume setting is only effective on earbud. Not effective on AV OUT volume.
• System didn’t save the volume setting, in case of the volume is too high in AVIN or RF mode.

MODE MENU

• Short press the left wheel to pop up mode menu.
• RF normal: this mode is normal 48 CH receive mode.
•  RF Racing: this mode will make receiver only work on RaceBand.
• RF Third-Party: in this mode, the goggles button cant control the external receiver, also the OSD of the goggles cant read the band/channel of the receiver.
• AVIN: When enable the AV IN mode . The NTSC and PAL system format can be supported to be automatically switched. The receiver module will be automatically turned off to save the power.
• HDMI IN：the receiver module and the video recording module will be automatically turned off to save the power.
• Playback: in this mode, customer can review the DVR files.

PLAYBACK

• In playback mode, roll right wheel to choose the DVR, short press right wheel to play and pause.
• Left wheel to adjust the volume.
• When playing the DVR, roll the right wheel to fast forward or fast backward.
• Press the Right button to quit DVR .
• Press the Left button to delete DVR.

Setting

• Short press right button to pop up or quit system menu.
• Roll right shuttle wheel to navigate, press the wheel into the sub menu.

Head Tracking

• The head tracking button is on the right side of the goggles.
• The gyro required for an initialization time. When it is powered on, goggles must be kept horizontal and stable as long as possible. When hearing the sound of a “beep”, the initialization is done.
• Hold HT button to reset the PPM signal to the center, goggles will beep when press the button.

Disable the Headtracker can save the gyro initialization time to speed up goggles boot time.

Image

In image setting menu, customer have standard, bright, vivid, soft and 3 customized files to select. Customer can adjust Brightness, Contrast, Saturation, Hue and Sharpness to suit different environment . in 3 user 1/2/3, the image setting can not change in 4 pre-set files.

DVR

• Left button is record button and stop button.
• Build in DVR H264 encoding, SD card recommends Class10, SD card can support up to 128GB.
• SD card must be formatted into FAT32, user can get into system menu to select the Format SD .
• The video recording function can be used in both the RF Mode and the AV IN Mode.
• By default, when recording the video (including: Recording the sound), the “sound recording” function can be turned off in the system menu, then the video signal can be recorded only.
• Automatic recording: enable this function , if the video signal has been detected, the recording will be activated automatically. The recording function can also manually be stopped by press the REC button.
  • <Auto&Follow> on, the DVR will auto start recording when video signal is on, and stop recording after 30s when signal is cut, if signal is on again, DVR will start recording again.
  • Press the REC button to manually start recording，DVR will stop recording after 30s when signal is cut, but it will auto start recording when signal is on. press REC button agian can manully stop rec to save SD card space.
• Cyclic recording： Overwriting of older recordings on or off (in case of storage space is wasted).
• The video recording File will be automatically divided into multiple Files. In the menu system, the video length can be set as: 5 minutes, 10 minutes, 20 minutes and 30 minutes. The default video length can be set as 30 minutes / each File.
• If the power has been suddenly disconnected in the video recording process, the DVR will be damaged. The goggles have repairing function. After entering into the Playback mode, the last DVR file will be automatically checked. If it has been damaged, the DVR file will be automatically repaired.

Display

• In Display setting menu, customer can set the topbar OSD time, disable OSD time out, the OSD always on.

• In Display menu, customer can set the RSSI icon: Icon + percentage, Icon, Percentage, Disable, also adjust the vertical position of the RSSI.

• The Luminance of the LCOS screen and be adjust in the menu (8 stage, default is 5).Normally do not
  set the brightness too high unless the image is dim.

• Sleep MODE: To prevent screen burnout, the goggles have sleep mode, The sleep mode can be set in the menu( 1minute 3minutes 5 minutes, default 3 minutes.) When sleep mode is enabled the goggles will detect the movement of the goggles (via headtracker gyro), when the goggles stay still to the preset time , the buzzer will beep , after 10 seconds, the goggles will switch to sleep mode , the screen will turn off, move the goggles to quit sleep mode.

• I n Display setting menu, the customer can change the aspect ratio(4:3 or 16:9), default is 4:3. also user can switch to small fov mode, image will cut at the edge on screen.

• When sleep mode is triggered, the rest functions of goggle is still working (receiver, DVR etc).

To quit Sleep mode: Move the goggles when hearing a beep.

SYSTEM MENU

• Power supply menu, user can choose battery type(2S~6S) to make sure goggles show real capacity of the battery
• Voltage calibration gives the user a ±0.9V range to adjust the voltage, when calibrating the voltage, use a multimeter to measure the loaded voltage of the battery, then use a shuttle wheel to adjust voltage.
• RSSI Calibration: use can calibrate the RSSI in this menu, to calibrate the RSSI, the user needs to remove the antenna, and turn off the VTX, then select yes, when calibration is done, the goggle will beep.
• System Language can select in to: English, French, German, Russian, Italian, Portuguese, Spanish, Chinese, Japanese, Korean.
• The built-in fan can not only be mainly used for defogging but also can be used to dissipate the heat
• the speed of fan can be set in the system menu, press the POWER button to start up/stop the fan. .·Factory Reset: The user can reset all the functions and settings in this menu.
• DVR FW upgrade:User can upgrade DVR Firmware from SD card in this menu.
• Firmware version: Goggles Firmware, DVR Firmware version and Serial Number will show in this menu.

The function of the wheel and buttons can be swapped from left side to the right side , make to adapt left handed user. when rotary switch is enabled, all the functions in manual are changed from left to right.

Firmware Update

Goggles

1. Connect goggles to the computer.
2. Hold the left wheel then turn on the goggles, the usb cable will power the goggles, release the left wheel, the computer will automatically install the driver, the computer will show new removable storage.
3.  Copy the Firmware(A/B) files to storage. goggles will install the update at the same time.

Even enabled the rotary switch function, the boot button is still left button. when the copying is done, the firmware upgrade is done.

DVR

1. Take a SD card and format the card to FAT32.
2. Copy the DVR Firmware to the SD card , insert it in the goggles and turn it on.
3. Go to the system menu and choose DVR FM upgrade.

Receiver Firmware

1. Take the receiver out, hold the boot button when connect the receiver to the computer.
2. Computer will automatically install the driver, the computer will show a new removable storage .
3.  Copy the Firmware File to the folder(Not the SD card). The receiver will install the update at the same time. When the copying is done, the firmware upgrade is done.
4. This content is subject to change, download latest version from: www.skyzonehobbies.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>