SKYZONE M5F FPV Monitor User Manual

SKYZONE M5F FPV Monitor

Product Information

Specifications

• Screen Resolution: 800*480

• Receiver Language : Chinese/English

• Power : DC 6.5-25.2V/USB 5V/18650 Lion

• Power Consumption: 12V/520mA 6.24W

• DVR Endurance : MJEPG 60FPS, SD Max 128Gb, 1.5
  Hour168503000mAh

• Screen : M5F 900 Lum High brightness LCD

• Receiver : 5.8Ghz 48 CH SteadyView Fusion Receiver

Introduction
The SKYZONE M5F monitor is a high brightness 5-inch monitor integrated with a SteadyView receiver. The receiver merges two signals to one, avoiding image tearing and rolling, making the image more stable and clear. The monitor features a wheel with a classic Skyzone UI, making it easy to use. It supports 1-cell 18650 battery for easy battery switching and also supports 2-6S Lipo for easy field power supply.

Quick Start Guide

1. Install the antenna and 18650 Battery.
2. Short press the power button, then hold the power button for 3 seconds to power on.
3. Short press the power button, then hold the power button for 3 seconds to shut down.

Band / Channel / Receiver Mode Setting

1. Press the wheel to change the channel. Press the wheel again to switch to Band setting mode and roll the wheel to change the Band.
2. No wheel operation for 3 seconds will quit the channel setting mode.
3. Hold the wheel to pop up the search menu. Press the wheel to start auto search. After searching all the frequencies, the receiver will work on the strongest signal. Roll the wheel to manually select the channels. Hold the right wheel to quit searching.

Receiver Modes

• MIX1: Mix1 mode provides basic fusion processing to reduce excessive intervention of the circuit on the picture.
• MIX2: Mix2 mode improves synchronization stability, especially under weak signals to maximize synchronization and lock video.
• MIX3: Mix3 mode enhances the synchronization signal on the basis of Mix2, maximizing the stability of the video image, and maximizing compatibility with other display devices. In this mode, the brightness of the video signal will be reduced.
• DIV: Div mode turns off fusion processing and the receiver works in traditional diversity receiving mode. The audio and video signal output corresponding to the channel with the highest RSSI intensity will be selected.

Sometimes the auto search channel is not accurate, so users may need to manually select the channel.

Brightness
Press the Menu button to pop out the menu. Roll the wheel to navigate and press to select.

FAQ

• Q: What is the screen resolution of the M5F monitor?
  A: The screen resolution is 800*480.

• Q: What power source does the M5F monitor support?
  A: The M5F monitor supports DC 6.5-25.2V, USB 5V, and 18650 Lion batteries.

• Q: What is the DVR endurance of the M5F monitor?
  A: The M5F monitor can record MJEPG videos at 60FPS and supports SD cards up to 128GB. It has an endurance of 1.5 hours with a 168503000mAh battery.

• Q: What is the receiver language of the M5F monitor?
  A: The M5F monitor supports both Chinese and English languages.

M5F
FPV Monitor USER MANUAL

Specifications

Specification

| M5F
Screen| 900 Lum High brightness LCD
Resolution| 800*480
Receiver| 5.8Ghz 48 CH SteadyView Fusion Receiver
Language| Chinese/English
Power| DC 6.5-25.2V/USB 5V/18650 Lion
Power Consumption| 12V/520mA 6.24W
DVR| MJEPG 60FPS, SD Max 128Gb
Endurance| 1.5 Hour（16850，3000mAh ）

BAND/CHANNEL table

BAND/CH table

BAND/CH| CH 1| CH2| CH3| CH4| CH5| CH6| CH7| CH8
A| 5865M| 5845M| 5825M| 5805M| 5785M| 5765M| 5745M| 5725M
B| 5733M| 5752M| 5771M| 5790M| 5809M| 5828M| 5847M| 5866M
E| 5705M| 5685M| 5665M| 5645M| 5885M| 5905M| 5925M| 5945M
F| 5740M| 5760M| 5780M| 5800M| 5820M| 5840M| 5860M| 5880M
R| 5658M| 5695M| 5732M| 5769M| 5806M| 5843M| 5880M| 5917M
L| 5362M| 5399M| 5436M| 5473M| 5510M| 5547M| 5584M| 5621M
Sensitivity| -98dBm±1dBm
Antenna port| 2 X SMA-K,50ohm

Package Included

1. Monitor*1
2. 5.8GHz 2dB antennas*2
3. Video/Audio Cable*1
4. USB-C Cable*1
5. XT60-DC5.52.1 Power Cable1
6. User Manual*1

Diagram

1. CH/BAND/Search
2. Menu
3. Record
4. Power
5. SD card slot
6. AV IN/OUTPUT
7. USB C port
8. DC PT(5.5*2.1mm)

Introduction

The SKYZONE M5F monitor is the high brightness 5 inch monitor integrated with steadyview receiver , the receiver merge two signals to one, avoid image tearing and rolling, make image more stable and clear The wheel with classic skyzone UI made the goggles easy to use, the monitor support 1cell 18650 battery, easy to switch battery, also support 2-6S Lipo, easy to power on the field.

Quick Start Guide

1. Install the antenna and 18650 Battery.
2. short press the power button then hold power button for 3s to power on,
3. short press the power button, then hold the power button 3s to shut down..

Band /Channel / Receiver mode setting

1. Press the wheel, then roll wheel to change channel, press the wheel again switch to Band setting mode, then roll the wheel to change the Band. Press wheel again to select diversity or Mix mode .
2.  No wheel operation for 3 seconds，RF setting will quit the channel setting mode.
3. Hold the wheel to pop up search menu, press the wheel to start auto search, after searching all the frequency, receiver will work on the strongest signal. Roll the wheel to manually select the channels, hold the right wheel to quit searching.

Receiver Mode

• MIX1: Mix1 mode provides basic fusion processing to reduce excessive intervention of the circuit on the picture
• MIX2: Mix2 mode improves synchronization stability, especially under weak signal to maximize synchronization and lock video
• MIX3: Mix3 mode enhances the synchronization signal on the basis of Mix2, maximizes the stability of the video image, and maximizes compatibility with other display devices. In this mode, the brightness of the video signal will be reduced
• DIV:  Div mode, the fusion processing will be turned off, and the receiver will work in the traditional diversity receiving mode, and the audio and video signal output corresponding to the channel with the highest RSSI intensity will be selected.

Sometime the auto search channel is not accurate, user may need manually select the channel.

Brightness
Roll the wheel to adjust the brightness of the screen.

MENU
Press the Menu button to pop out the menu, roll the wheel to navigate, press to select.

Mode

• Short press the menu button to pop out menu.
• RF normal: this mode is normal 48 CH receive mode.
• RF Racing: this mode will make receiver only work on RaceBand.
• AVIN: When enable the AV IN mode . The NTSC and PAL system format can be supported to be automatically switched. The receiver module will be automatically turned off to save the power.
• Playback: in this mode, customer can review the DVR files.

PLAYBACK

• In playback mode, roll the wheel to choose the DVR, short press wheel to play and pause.
• When playing the DVR, roll the right wheel to fast forward or fast backward.
• Press the REC button to quit DVR .·

Setting

Image
In image setting menu, customer have standard, bright, vivid, soft and 3 customized files to select. Customer can adjust Brightness, Contrast, Saturation, Hue and Sharpness to suit different environment . in 3 user 1/2/3, the image setting can not change in 4 pre-set files.

DVR

• REC button is record button and stop button.
• Build in DVR MJPEG encoding, SD card recommend Class10, SD card can support up to 128GB.
• SD card must be formatted into FAT32 , user can get into system menu to select the Format SD .
• The video recording function can be used in both the RF Mode and the AV IN Mode.
• By default, when recording the video (including: Recording the sound), the “sound recording” function can be turned off in the system menu, then the video signal can be recorded only.
• Automatic recording: enable this function , if the video signal has been detected, the recording will be activated automatically. The recording function can also manually be stopped by press the REC button. <Auto& Follow> on, the DVR will auto start recording when video signal is on, and stop recording after 30s when signal is cut, if signal is on again, DVR will start recording again. Press the REC button to manually start recording， DVR will stop recording after 30s when signal is cut, but it will auto start recording when signal is on. press REC button agian can manfully stop rec to save SD card space.
• Cyclicrecording: Overwriting of older recordings on or off (in case of storage space is wasted).
• The video recording File will be automatically divided into the multiple Files. In the menu system, the video length can be set as: 5 minutes, 10 minutes, 20 minutes and 30 minutes. The default video length can be set as 30 minutes / each File.·If the power has been suddenly disconnected in the video recording process, the DVR will be damaged.

Display

• I n Display setting menu, customer can set the topbar OSD time, disable OSD time out, the OSD always on.
• I n Display menu, adjust the vertical position of the RSSI.
• The Luminance of the screen and be adjust in the menu (8 stage, default is 5).Normally do not set the brightness too high unless the image is dim.
• I n Display setting menu, customer can change the aspect ratio(4:3 or 16:9).

SYSTEM MENU

• Power supply menu, user can choose battery type(2S~6S) to make sure goggles show real capacity of the battery
• Voltage calibration gives user ±0.9V range to adjust the voltage, when calibrate the voltage, use multimeter to measure the loaded voltage of the battery, then use shuttle wheel to adjust voltage.
• RSSI Calibration : use can calibrate the RSSI in this menu, to calibrate the RSSI, user need remove the antenna, and turn off the VTX, then select yes, when calibration is done, the goggle will beep.
• System Language can select in to: English ,Chinese .
• Time and Date : User can adjust the time and date of the monitor ，Press REC button to quit setting.
• Fan： User can adjust the fan speed，16 stage to adjust.
• Factory Reset: User can reset the settings to factory reset.
• VRX Update : User can update the VRX firmware when copy the firmware to the SD card.
• DVR Update: User can update the DVR firmware when copy the firmware to the SD card.
• System Version : Monitor firmware， DVR Firmware ，Serial Number will shown at this menu.

Firmware Update

Monitor

1. Connect monitor to the computer.
2. Hold the wheel then turn on the monitor, the sub cable will power the goggles, release the wheel, computer will automatically install the driver , computer will show a new removable storage .
3. copy the Firmware(A/B) File to storage . monitor will installing the update at the same time.

DVR

1. Take a SD card and format the card to FAT32.
2. Copy the DVR Firmware to the SD card , insert it in the goggles and turn it on.
3. Go to the system menu and choose DVR FM upgrade.

Receiver Firmware

1. Connect monitor to the computer.

2. Hold the wheel then turn on the monitor, the usb cable will power the goggles, release the wheel,
   computer will automatically install the driver , computer will show a new removable storage .

3. copy the receiver firmware to storage . receiver will installing the update at the same time. This content is subject to change, download latest version from: www.skyzonefpv.com

References

• SKYZONE FPV Goggles Official Website-Best Analog FPV Goggles – SKYZONEFPV

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>