Cosun CS-TL20007 Sprout Desk Lamp Instruction Manual
- June 6, 2024
- Cosun
Table of Contents
User Manual for Sprout Desk Lamp
-
Brand Name: Nerius
-
Product Name: Sprout Desk Lamp
-
Model: CS-TL20007
-
Highlights
• Bendable silicone gooseneck
• Quality and durable Osram LEDs without flicker or dazzle
• Wireless charging
• Three color temperature modes for working, reading, and relaxing
• 6-level dimming control via touch panel -
Structure:
A: Power on/off touch key
B: Working Mode touch key
C: Reading Mode touch key| D: Relaxing Mode touch key
E: Wireless charger
F: Wireless charging indicator light
---|--- -
Specifications
Input Voltage: 12V
Power: 13W
Color Temperature: Relaxing Mode, 2700K; Working Mode, 5000K; Reading Mode, 4000K
Color Rendering Index: 90
Illuminance: >1100Lux (40cm, vertical) -
How to Use
-
Hardware
1. Plug in the desk lamp, with the power indicator being off.
2. Tap Key A after power connection. The desk lamp is lit up, as well as the power indicator, indicating current status of power on. Tap Key B or C or D to change color temperature as needed.
3. In any color temperature mode, tap “+” and “-” to shift among six brightness levels that are marked by six indicators. Tap “+” to increase the brightness and “-” to decrease the brightness.
4. After power connection, place the phone flat on the center position E of the wireless charger in the panel with the screen facing up. After a few seconds, the blue indicator light for wireless charging in the panel appears to be breathing, indicating that it is in the charging state.
5. After the desk lamp is lit up normally, Tap Key A, the lamp is off. -
for indoor use only
-
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
FCC Caution:
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 15cm between the radiator& your body.