MPOW Iron Pro Wireless Gaming Headset Surround Sound Gming Headset User Manual

MPOW IRON PRO WIRELESS GAMING HEADSET

SURROUND SOUND GAMING HEADSET

Packing List

MPOW IRON PRO Wireless Gaming Headset

Mpow 2.4G Wireless Transmitter    User Manual

3.5mm Audio Cable                     Type-C Cable

Diagram

1. Retractable Headband
2. Microphone
3. Power Button
4. Power LED
5. MIC LED
6. Mic Mute Button
7. Soft Memory-Protein Ear Cushions
8. Master Volume
9. 3.5mm Audio Port
10. Type-C Charging Port

Power ON/OFF

1. Click Once
2. Power On
3. Hold on 3s
4. Power Off

How to Connect

1. Click Once
2. Failure
3. Successful
4. LED
5. Constantly On
6. Flashes Every 3 Seconds

MIC ON/OFF

1. Click Once
2. ON
3. OFF

Charge the Headset

Power Saving Features

1. If your headset is disconnected from your devices and no operation is performed for five minutes, your headset will turn off automatically.
2. Insert the 3.5mm audio cable, then the headset turns off and enters the wired mode.
3. Low Battery Reminder: With less than 2% power ,the headset will beep every 5 minutes, and automatically turn off in 15 minutes.

Compatible Devices

PC/PS4/PS4 PRO/PS4 SLIM/MAC OS/Xbox one/Xbox One S/ Nintendo Switch

Note. 2.4GHz Wireless Transmitter only supports PC and Playstation 4/MAC OS.

Operation Guides

(1) PC: 2.4G Wireless Mode

1. Transmitter connection

Open your sound settings from Control Panel >Sound. Set “MPOW-BH470A” to be the default device to play and record sounds.

(2) Mac OS: 2.4G Wireless Mode

1. Transmitter connection
2. USB-C Hub (Not included)

Mac OS Setting (Connect the headset to the USB port of MAC computer)

(3) PS4 Console: Wired Mode

1. PS4 Console
2. 3.5mm Audio

PS4: 2.4G Wireless Mode

1. Transmitter connection
2. PS4

Connect Transmitter to USB Port → Power on Headset → Go to Settings >> Devices

Audio Devices: Set Output to Headphones to All Audio, Set Volume Controls (Headphones) to maximum.

(4) Xbox One: Wired Mode Only

1. New Xbox One
2. Old Xbox One

Xbox Setting (Connect the headset to the audio port of the Xbox. The audio adapter needs an extra purchase).

Specification

FCC Statement

Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

ISEDC RSS warning

This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

ISEDC Radiation Exposure Statement:
This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>