Shenzhen Fei Er Electronics P4 Wireless Controller Instruction Manual
- June 6, 2024
- Shenzhen Fei Er Electronics
Table of Contents
Shenzhen Fei Er Electronics P4 Wireless Controller P4 Wireless Controller
Before using this product, carefully read this manual and any manuals for
compatible hardware Retain instructions for future reference.
Battery life and duration
- Do not handle damaged or leaking lithium-ion batteries.
- The battery has a limited life span. Battery duration will gradually decrease with repeated usage and age. Battery life also varies depending on the storage method, conditions of use and environmental factors.
- Charge in an environment where the temperature range is between 10°C-30°C(50°F – 86°F).
- Charging may not be as effective when performed in other environments.
- When the wireless controller is not used for an extended period of time, it is recommended that you fully charge it at least once a year to help maintain battery functionality.
Use and handling precautions
- Avoid prolonged use of this product. Take a break at about 30minute intervals.
- Stop using this unit immediately if you begin to feel tired or if you experience discomfort or pain in your hands or arms during use. If the condition persists, consult a doctor.
- Permanent hearing toss may occur if the headset or headphones are used at high volume. Set the volume to a safe level Over time, increasingly loud audio may start to sound normal but can actually be damaging your hearing. If you experience ringing or any discomfort in your ears or muffled speech, stop listening and have your hearing checked. The louder the volume, the sooner your hearing could be affected. To protect your hearing;
- Limit the amount of time you use headset or headphones at high volume.
- Avoid raising the volume to block out noisy surroundings.
- Lower the volume if you can’t hear people speaking near you.
- Don’t not expose the product to high temperatures, high humidity or direct sunlight.
- Do not allow the product to come into contact with liquids.
- Do not put heavy objects on the product.
- Do not throw or drop the product or subject it to strong physical
shock.
When using the motion sensor function, be cautious of the following points. If the controller hits a person or object, this may cause accidental injury or damage.
- Before using, check that there is plenty of space around you.
- ‐When using the controller, grip it firmly to make sure it cannot
slip out of your hand.
“if using a controller that is connected to the P4 system with a USB cable, make sure there is enough space for the cable so that the cable will not hit a person or object. Also, take care to avoid pulling the cable out of the P4 system while using the controller.
Exterior protection
Follow the instructions below to help prevent the product exterior
from deteriorating or becoming discolored.
- Do not place any rubber or vinyl materials on the product exterior for an extended period of time.
- Use a soft, dry cloth to clean the product.Do not use solvents or other chemicals. Do not wipe with a chemically-treated cleaning cloth.
Registering (pairing) the controller
The first time you use the controller, or when you want to use the controller on another PS system, you must perform device registration (pairing). Turn on the P4 system and connect the controller to the system with the USB cable to complete device registration. To a USB port on the P4 system. USB cable (supplied with the P4 system)
HINT: For details on using the controller, refer to the use’s guide of the P4 system
Specifications
- Input power rating: 5V— 800 mA
- Battery type: Built-in rechargeable Lithium-lon battery
- Voltage: 3.7 V—
- Battery capacity: 800 Mah
- Operating temperature: 5 °C- 35。C(41°F- 95 °F) Design and specifications are subject to change without notice.’
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement: This device complies with RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.