electro-harmonix Satisfaction Vintage Fuzz Pedal User Manual
- June 6, 2024
- electro-harmonix
Table of Contents
electro-harmonix Satisfaction Vintage Fuzz Pedal User Manual
SATISFACTION VINTAGE FUZZ
Congratulations on your purchase of the Satisfaction Fuzz, a modern recreation of the classic fuzz sounds of the 1960s. Updated with a compact nano chassis, the Satisfaction creates drive sounds ranging from crunchy breakup to intense fuzz. Attack and Volume controls put you in the mix, and true-bypass switching keeps your bypassed signal intact
– CONTROLS
ATTACK Knob
– Controls the amount of input gain and distortion. As you turn this knob clockwise, the SATISFACTION ranges from mild drive to saturated fuzz.
VOL Knob
Sets the output level of the SATISFACTION.
FOOTSWITCH and LED
The Footswitch selects whether the SATISFACTION is engaged or in true bypass
mode. When the effect is engaged, the LED is lit.
INPUT Jack – This ¼” jack is the audio input for the SATISFACTION. The input
impedance is 50k.
AMP Jack
This ¼” jack is the audio output from the SATISFACTION. The output impedance depends on the VOLUME setting, ranging from 100 to 25k.
9V Power Jack
The SATISFACTION can run off of a 9V battery or you can use an optional 9VDC AC Adapter capable of delivering at least 25mA to the 9V power jack. We recommend the EHX9.6DC-200. The AC Adapter must have a center negative plug. The battery may be left in or taken out when using an AC Adapter. The SATISFACTION draws 1.5mA at 9VDC. The maximum voltage that may be connected to the 9V Power Jack is 10VDC.
CHANGING THE BATTERY
To change the battery, remove the four screws on the bottom of the SATISFACTION and take off the bottom plate. The battery clip is in the bottom of the unit. Take care not to touch the circuit board while changing the battery in order to avoid damaging a component.
WARRANTY INFORMATION
Please register online at http://www.ehx.com/product-registration or complete
and return the enclosed warranty card within 10 days of purchase. Electro-
Harmonix will repair or replace, at its discretion, a product that fails to
operate due to defects in materials or workmanship for a period of one year
from date of purchase. This applies only to original purchasers who have
bought their product from an authorized Electro-Harmonix retailer. Repaired or
replaced units will then be warranted for the unexpired portion of the
original warranty term.
If you should need to return your unit for service within the warranty period,
please contact the appropriate office listed below. Customers outside the
regions listed below, please contact EHX Customer Service for information on
warranty repairs at info@ehx.com or
+1-718-937-8300. USA and Canadian
customers: please obtain a Return Authorization Number (RA#) from EHX Customer
Service before returning your product. Include with your returned unit: a
written description of the problem as well as your name, address, telephone
number, e-mail address, and RA#; and a copy of your receipt clearly showing
the purchase date.
United States & Canada
EHX CUSTOMER SERVICE
ELECTRO-HARMONIX
c/o NEW SENSOR CORP.
47-50 33RD STREET
LONG ISLAND CITY, NY 11101
Tel: 718-937-8300
Email: info@ehx.com
Europe
JOHN WILLIAMS
ELECTRO-HARMONIX UK
13 CWMDONKIN TERRACE
SWANSEA SA2 0RQ
UNITED KINGDOM
Tel: +44 179 247 3258
Email: electroharmonixuk@virginmedia.com
This warranty gives a purchaser specific legal rights. A purchaser may have
even greater rights depending upon the laws of the jurisdiction within which
the product was purchased.
To hear demos on all EHX pedals visit us on the web at www.ehx.com
Email us at info@ehx.com
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>