electro-harmonix 35118 Headphone Amp Instructions

: June 6, 2024
: electro-harmonix

Table of Contents

HEADPHONE AMP
- – CONTROLS –
- – OPERATION AND WARNINGS –
Documents / Resources

HEADPHONE AMP

Congratulations on your purchase of the Electro-Harmonix HEADPHONE AMP! Now you can rock out anywhere without disturbing your neighbors. Simply use a 9V battery and any pair of headphones you like, as long as they have an 1/8″ plug attached to them.

– CONTROLS –

VOLUME – Sets the output level.

INPUT JACK – Connect the output of your instrument or effects pedal to this 1/4″ jack. The input impedance presented at the INPUT jack is 100 kΩ.

OUTPUT JACK - Insert the 1/8″ stereo plug from your headphones into this jack.

– OPERATION AND WARNINGS –

Power, from the internal 9-volt battery is activated by plugging into the output. The headphone cable should be removed when the unit is not in use to avoid running down the battery. A pop may occur in the headphones when inserting or removing the plug from the headphone jack.

To change the 9-volt battery, you must remove the 4 screws on the bottom of the HEADPHONE AMP. Once the screws are removed, you can take off the bottom plate and change the battery. Please do not touch the circuit board while the bottom plate is off or you may damage a component.

– WARRANTY INFORMATION –

Please register online at http://www.ehx.com/product-registration or complete and return the enclosed warranty card within 10 days of purchase. Electro-Harmonix will repair or replace, at its discretion, a product that fails to operate due to defects in materials or workmanship for a period of one year from date of purchase. This applies only to original purchasers who have bought their product from an authorized ElectroHarmonix retailer. Repaired or replaced units will then be warranted for the unexpired portion of the original warranty term.

If you should need to return your unit for service within the warranty period, please contact the appropriate office listed below. Customers outside the regions listed below, please contact EHX Customer Service for information on warranty repairs at info@ehx.com or +1-718-937-8300. USA and Canadian customers: please obtain a Return Authorization Number (RA#) from EHX Customer Service before returning your product. Include with your returned unit: a written description of the problem as well as your name, address, telephone number, e-mail address, and RA#; and a copy of your receipt clearly showing the purchase date.

United States & Canada
EHX CUSTOMER SERVICE
ELECTRO-HARMONIX
c/o NEW SENSOR CORP.
47-50 33RD STREET
LONG ISLAND CITY, NY 11101
Tel: 718-937-8300
Email: info@ehx.com

Europe
JOHN WILLIAMS
ELECTRO-HARMONIX UK
13 CWMDONKIN TERRACE
SWANSEA SA2 0RQ
UNITED KINGDOM
Tel: +44 179 247 3258
Email: electroharmonixuk@virginmedia.com

This warranty gives a purchaser specific legal rights. A purchaser may have even greater rights depending upon the laws of the jurisdiction within which the product was purchased.

To hear demos on all EHX pedals visit us on the web at www.ehx.com
Email us at info@ehx.com