Shenzhen Lianlixing Technology PCE-3100 PCIE Wireless Card Installation Guide
- June 6, 2024
- Shenzhen Lianlixing Technology
Table of Contents
Quick Installation Guide
PCE-31 OO/PCE-9260/0KN-AX200-D/PCE-AX200/ PCE-AX210
PCIE Wireless Card
Connect to a Computer
a. Turn off your computer, unplug the power cable and remove the case panel.
b. Locate an available PCle x1 slot and carefully insert the adapter.
c. Connect the antenna to the adapter.
d. Replace the case panel, plug in the power cable, and tum on your computer.
Bluetooth connection
Connect Bluetooth cable after the b step above, the White connector to the
Adapter socket, the Black one to the USB(F-USB) socket on the Motherboard.
Install Driver
https://downloadcenter.intel.com/product/59485/Wireless-Networking
a. Insert the CD and run the driver file to finish the driver installation.
b. You can also download the driver from the QR code or
https://downloadcenter.intel.com/product/59485/Wireless-Networking
c. Follow the InstallShield Wizard to complete the installation.
Note: There are WiFi drivers and Bluetooth drivers, both of them should be
installed.
Join a Wireless Network
a. Click the network icon( ）on the taskbar.
b. Select your Wi-Fi network, click Connect and enter the password when
prompted.
MADE IN CHINA
Technical Support: ufon.sales@gmail.com
Add: D1113, Longgang Business Center, Shenzhen, China
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device and its antenna(s) must not be co-located or operated in
conjunction with any other antenna or transmitter.
Radiation Exposure Statement
To maintain compliance with FCC’s RF exposure guidelines, This equipment
should be installed and operated with a minimum distance of 20cm from your
body.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>