MUVEACOUSTICS MA2000 A-Plus Wireless Portable Speaker User Manual
- June 6, 2024
- MUVEACOUSTICS
Table of Contents
MUVEACOUSTICS MA2000 A-Plus Wireless Portable Speaker
Bluetooth connection
Devices with Bluetooth BDR. EDR wireless technology. such as Bluetooth wireless technology equipped computers. smartphones and MP3 players.
To use Bluetooth for your audio connection first pair A+ with your audio source (music player, smartphone. laptop, or another Bluetooth-equipped device that can act as an audio source). First press and hold the Power Multifunction Button MFB for 3 seconds or until u hear the tone to turn the power on. Once the power turns on the A+ is in pairing mode. The blue Sync LED will blink slowly and then flash quickly. Make sure Bluetooth is enabled on your audio source and in a few moments ‘MUVEACOUSTICS:A+’ will appear on your list of possible Bluetooth connections. Press ‘pair’ or ‘connect’ on your device and when the connection is made, the blue LED will stop blinking From now on. when you turn on A+. it will automatically search for the last Bluetooth device it was paired with.
The period of Bluetooth pairing is about 10 minutes after switching on. If there is no pairing after 10 minutes. A+ will shut off automatically. However. the Aux-in function can override the playing of music by Bluetooth connection even the speaker is connected to Bluetooth devices. To disconnect and pair with another device. double click quickly the power/ Multifunction Button (MFB) to come back to the pairing mode and repeat the procedure with another device.
WlrN COnneclllon
A+ has a standard 3.5mm audio cable. If there is no Bluetooth source available
or if you simply prefer a wired connection. you can connect your A+ directly
to your audio source using a stereo male 3.5mm connector at the end of the
cable. (This cable is included in the packaging box
FCC STATEMENT
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a Presidential installation. This equipment generates uses and can radiate radio Mfrequency energy. if not installed and used in accordance with the instructions, may cause harmful I interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception. which can be determined by turning the equipment off and on. the user Is encouraged to try to correct the interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-
Consult the dealer or an experienced radio/ TV technician for help.
This device complies with Part 1S of the FCC Rules. Operation Is subject to the following two conditions, this device may not cause harmful Interference. and -
Is device must accept any interference received. Including Interference that “); cause undesired operation
FCC Radiation Exposure Statement: This equipment complies with h FCC radiation exposure limits set for h for an uncontrolled environment
JOIN THE COMMUNITY
-
Sign up now for
Special Offers -
Events
-
Contests
-
Access to new products launch
www.muveacoustics.com/community
MUWACOUS’11CS ONE YEAR LIMITED WARRANTY
MUVEACOUSTICS A+ speakers have been subjected to a thorough series of tests to ensure the highest level of dependability. It is unlikely that you will experience any problem, but if a defect should become apparent during the use of this product. MUVEACOUSTICS warrants Not the original purchaser that this product will be free from defects in material and workmanship for a period ofl2 months from the date of your? original purchase from an authorized dealer. If~ defe_ct Coye: red replace the product purchase at no repair charge (postage charges will apply). If a replacement is necessary and your product is no longer available. a comparable product may be substituted at the sole discretion of MUVEACOUSTICS. This warranty does not cover normal wear and tear. abusive use or misuse. modification. tampering or by any other cause not related to either materials or workmanship. This warranty does not apply to products used for any industrial, professional or commercial purposes
CUSTOMER service
For any service or technical queries. please contact our service team on the below email
Email: consumersupport@zeeva.com
Keep all relevant information for future reference
caution
Changes or modifications not expressly approved by the party responsible for the compliance could void the user’s (or you’re) authority to operate the equipment Avoid storage In extreme heat or cold. Avoid extreme temperatures and high humidity. The product’s 1NOrkfng temperature range Is 10-C to 40-C (SO”F to 104 ‘F).
WARNING:
The Input voltage to the product Is! N lA For your safety. please always
use the appropriate SV Input charger/Adapter to cha e the product DO NOT USE
Quick Cha In USB Adapter to cha e the product as It might damage the product
Only charge the product at ambient temperatures between 10deg “C/SOdeg “F and
40deg “C/104deg “F.
Do not heat above 70 deg ·c / 1S8 deg ‘F, eg. Do not expose to sunlight or
throw
Onofre.
switch off the product after use.
Please note that we \NOn’t take any responsibility for any wrong operation
(eg. Voltage higher than SV} as this may result In severe Injury or loss of
property, and we cannot control the operating process during the time the user
using this product. In extreme cases, abuse or misuse of the Lithium battery
packs can lead to an explosion, heat generation, fire development or smoke
development
-
Microphone
A+ has a built-in Microphone for phone calls. -
Power/ Multffunctlon Button (MFB)
Press and hold for about 3 seconds to turn the power On/ Off.
-
Play/Pause
You can play and pause your music using the
Power/ Multifunction Button (MFB) To Perform this function press and release the button quickly. phone -
Speakerphone
When incoming calls ring on your phone you will hear a tone ringing on your A+ speaker. Press and release the Power/ Multifunction Button (MFB) to answer/ end a call while A+ is paired with your phone via Bluetooth. Use A+ integrated microphone to speak. Press and hold the Power/ Multifunction Button (MFB) for 2\ seconds to refuse an incoming call. -
Bluetooth Sync Indicator
blue when ready Bluetooth LED will be solid blue when the device is paired. -
volume
Press and release the “+” button quickly to increase volume. -
Next Song
Press and hold the “+” button to skip to the next song.
-
Volume Down
Press and release the”-” button quickly to decrease volume. -
Previous Song
Press and hold the “-” button to skip to the Previous song -
3.5mm Audio Line In
Standard audio in for use without Bluetooth. (Cable Included) -
USB port
Micro USB port for charging A+ . (Cable Included -
Battery Level
When the battery voltage is low, a sound beep will be heard every 3 minutes. After 6 minutes, the device will shut off automatically. White LED lights up during charging and it will turn off once fully charged -
Please Notes
A+ comes with a lithium-ion polymer battery. for best results, fully charge A+ before use. It will take 2-2.5 hours to full hard. To charge, plug the micro USB cable into A+ and plug the standard USB connector into your power source. While A+ is power off and charging the power LED will be solid white. -
Please Notes
When a 3.5mm audio cable is plugged in, the audio signal will go through the audio port and the Bluetooth will be automatically disconnected. The Bluetooth connection will be restored once the audio cable has been pulled out.