emerio FH-111235.1 Construction Fan Heater Instruction Manual
- June 6, 2024
- emerio
Table of Contents
emerio FH-111235.1 Construction Fan Heater Instruction Manual
Thank you very much for purchasing our products. In order to ensure correct operation, please read this manual and instruction carefully before use.
This product is only suitable for well insulated spaces or occasional use.
IMPORTANT INSTRUCTIONS
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, burns and other injuries.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance.
- Cleaning and user maintenance shall not be made by children without supervision.
- Children of less than 3 years should be kept away unless continuously supervised.
- Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.
- CAUTION — Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- WARNING: In order to avoid overheating, do not cover the heater.
- The heater must not be located immediately below a socket outlet.
- Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
- Make sure the appliance is in good condition after remove it from the package.
- Check your mains voltage; it must match the specification of this heater.
- Check the power cord and plug carefully before use to ensure that they are not damaged.
- Be sure the power is turned off before unplugging the heater. Do not touch the plug with wet hands.
- Don’t cover the heater.
- Don’t allow moisture and dust to enter the appliance. Don’t use this heater in bathrooms or laundries. Store it in dry areas.
- Don’t put the heater on soft surfaces such as beds or sofas.
- Children must not play with or plug in the heater. Keep children away from the package. Polyethylene bags can be dangerous.
- Avoid using extension cords, as they may cause a fire hazard due to overheating.
- Indoor use only.
- Do not allow the power cord to hang (e.g over the edge of a table or counter) or place/run the power cord under rugs, carpeting, or in high-traffic areas where it may be tripped over or pulled.
- Do not plug or unplug the appliance from the electrical outlet with a wet hand.
- Do not put any stress on the power cord where it connects to the appliance, as the power cord could fray and break.
- Keep the power cord and product always away from heated surfaces.
- Do not insert any other objects into the heater, as it may cause an electric shock, fire or damage to this appliance.
- Do not use this appliance to dry or heat clothing, shoes, pipes or any other items.
- Use the appliance in a well-ventilated area, this heater is hot when in use, to avoid burns, do not let bare skin touch a hot surface, if provided, use handle when moving this heater, keep combustible materials, such as furniture pillows, bedding, paper, clothes, and curtains at least 3 feet ( 0.9 meters) from all sides of the heater.
- Use this heater only as described in the manual, any other use not recommended by the manufacturer may cause fire, electric shock or personal injury.
- Do not operate the heater with a damaged cord or plug. After the heater malfunctions or has been dropped or damaged in any manner, return the appliance to a service facility for examination, electrical or mechanical adjustment or repair.
- The appliance should not be operated by means of an external timer-switch or by means of a separate system with remote control not originally belonging to this appliance.
- This heating device is not suitable for assembling in vehicles and machines.
- The rotor guard shall not be disassembled/opened to clean the rotor blades.
- This appliance is not a toy.
- Do not immerse the unit in water.
- To avoid the risk of fire or electric shock do not remove the housing.
- Any servicing other than cleaning and user maintenance should be performed by an authorized service representative only.
- Means “DO NOT COVER “.
PARTS DESCRIPTION
- Indicator light
- Thermostat control switch
- Heat select switch
- Air outlet grille
- Handle
Heat setting:
“O” position – OFF
– Ventilation
– WARM AIR (low heat output)
– WARM AIR (high heat output)
THERMOSTAT
- Rotate the switch to choose the suitable setting — ventilation/ WARM AIR (low heat output)/ WARM AIR (high heat output).
- Turn the thermostat to choose the temperature, the heater begins to work.
- The thermostat will turn the heater off when the selected room heating is achieved, and when the temperature drops it will turn on again automatically.
Note:
To switch off the appliance, it is recommended to turn the heat switch to
ventilation setting for about 15 seconds to cool down. After that, please turn
the heat switch to “O” position and then unplug the appliance. This can help
prolong the lifespan of the appliance.
SAFETY SYSTEM
- The appliance has a safety system which can automatically stop heating when overheated.
- If overheating occurs, switch off the appliance, remove the plug from the socket, and let it cool down for at least 10 minutes. Put the plug in the socket and switch on the heater.
MAINTENANCE
- The fan heater only needs regular cleaning on the outside.
- Before you clean the unit, turn off the switch. Remove the plug from the socket and wait until the fan heater cools down completely.
- Use a damp cloth to wipe the heater housing.
- Do not use detergents, abrasive cleaning liquids or chemicals (alcohol, gasoline etc.) to clean the appliance.
TECHNICAL DATA
Operating voltage: 220-240V ~ 50Hz
Power consumption: 2000W
GUARANTEE AND CUSTOMER SERVICE
Before delivery our devices are subjected to rigorous quality control. If,
despite all care, damage has occurred during production or transportation,
please return the device to your dealer. In addition to
statutory legal rights, the purchaser has an option to claim under the terms
of the following guarantee:
For the purchased device we provide 2 years guarantee, commencing from the day
of sale. If you have a defective product, you can directly go back to the
point of purchase.
Defects which arise due to improper handling of the device and malfunctions
due to interventions and repairs by third parties or the fitting of non-
original parts are not covered by this guarantee. Always keep your receipt,
without the receipt you can’t claim any form of warranty. Damage caused by not
following the instruction manual, will lead to a void of warranty, if this
results in consequential damages then we will not be liable. Neither can we
hold responsible for material damage or personal injury caused by improper use
if the instruction manual is not properly executed. Damage to accessories does
not mean free replacement of the whole appliance. In such case please contact
our service department. Broken glass or breakage of plastic parts is always
subject to a charge. Defects to consumables or parts subjected to wearing, as
well as cleaning, maintenance, replacement of said parts or shipping and
transportation costs to and from any place of repair are not covered by the
warranty and are to be paid.
ENVIRONMENT FRIENDLY DISPOSAL
Recycling – European Directive 2012/19/EU
This marking indicates that this product should not be disposed with other
household wastes. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please
use the return and collection systems or contact the retailer where the
product was purchased. They can take this product for environmental safe
recycling.
EMERIO Switzerland AG
Industriestrasse 47
6300 Zug
Switzerland
ERP information
Supplier: Emerio Switzerland AG
Industriestrasse 47
6300 Zug
Switzerland
Declare that the product detailed below:
Information requirements for electric local space heaters
Model identifier(s):
Item| Symbol| Value| Unit| Item| Unit
Heat output| | | | Type of heat input, for electric storage
local space heaters only (select one)|
Nominal heat
output
| Pnom| 2.0| kW| manual heat charge control, with
integrated thermostat
| No
Minimum heat output (indicative)| Pmin| 1.0| kW| manual heat charge control
with room and/or outdoor temperature feedback| No
Maximum continuous heat output| Pmax,c| 2.0| kW| electronic heat charge
control with room and/or outdoor temperature
feedback
| No
Auxiliary electricity consumption| | | | fan assisted heat
output| No
At nominal heat
output
| elmax| N/A| kW| Type of heat output/room temperature
control (select one)
At minimum heat output| elmin| N/A| kW| single stage heat output and no room
temperature control| No
In standby mode| elSB| 0| kW| Two or more manual stages, no room temperature
control| No
| | | | with mechanic thermostat room temperature control| Yes
| | | | with electronic room temperature control| No
| | | | electronic room temperature control plus day timer| No
| | | | electronic room temperature control plus week timer| No
| | | | Other control options (multiple selections possible)
| | | | room temperature control, with
presence detection
| No
| | | | room temperature control, with open
window detection
| No
| | | | with distance control option| No
---|---|---|---|---|---
| | | | with adaptive start control| No
| | | | with working time limitation| No
| | | | with black bulb sensor| No
Contact details| Emerio Switzerland AG Industriestrasse 47 6300 Zug
Switzerland
Satisfies the requirement of the Council Directives:
COMMISSION REGULATION (EU) No 2015/1188 of 28 April 2015 and Amending COMMISSION REGULATION (EU) 2016/2282 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for local space heaters
Regarding information for consumers on how to install, use and maintain the product, WEEE information, please check the instruction manual provided with packaging.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>