WanYin A20180 UVC Sanitizer with Wireless Charger and Sound Machine Instruction Manual
- June 6, 2024
- WanYin
Table of Contents
Wandin UVC Sanitizer with Wireless
Charger and Sound Machine
Instruction Manual UVC Sanitizer/Sound Machine/Wireless Charger/Night
Light/Alarm Clock
Model Number: GP-A289
Remove all items from the packaging and keep the packaging; if you need to dispose of it, please follow local regulations.
The clock has a pre-installed battery backup that will keep the time in case power is interrupted (like by a power outage, for example). To activate this backup function, simply pull out the insulator from the battery compartment in the sanitizer compartment. If you notice that battery backup is no longer working (the battery indicator turns on), simply replace the CR2032 coin-cell battery behind the circular battery door. Use a coin to open the door and access the CR2032 battery.
-
Press & hold the button on the top of the clock/sanitizer until the hour’s digits flash.
-
Use the VOL/SET + & – buttons on the top of the clock/sanitizer to adjust the hour.
-
After the hour is set, press the button until the minute’s digits flash.
-
Use the VOL/SET + & – buttons to adjust the minutes.
-
After minutes is set, press the VOL/SET + & – buttons to choose 12-hour (AM/PM) or 24-hour (12-hour time is the default.).
-
The clock default mode is 12 hours system with AM mode and PM mode.
-
Press and hold the button at the top of the clock/sanitizer until the hour digits flash on the display.
-
Use the + and ‒ button on the top of the clock/sanitizer to adjust the hour.
-
Press the button once, the minute digit flash on the display.
-
Use the + and ‒ button on the top of the clock/sanitizer to adjust the minute. After the minute is set, press the button once to select the alarm sound, press the +/- button to select either nature sound or buzzer alarm sound (the default alarm sound is nature sound). If a nature sound alarm sound is selected, press the MUSIC button to select the natural sound, and the number of nature sounds will be shown on the display.
-
Follow the short press AL1 key to enter the alarm volume setting mode, short press the +/- key to set the alarm volume.
-
Follow the short press AL1 key to exit and save the current settings, or do not operate for 20 seconds to automatically exit and save the current settings. Remarks: To set the time for alarm 2: follow the step above, using the “闹铃2” button instead of ”闹铃1” button.
-
Short press the TIMER button once, the 15-minutes indicator lights up denoted the timer is set to 15 minutes
-
Short press the TIMER button twice, the 30-minute indicator lights up denoted the timer is set to 30-minutes.
-
Short press the TIMER button three times, the 60-minute indicator lights up denoting the timer is set to 60-minutes.
-
Short the TIMER button again to turn off the timer function. To turn off the timer function completely, short press the TIMER button till all indicators are turned off.
-
The timing function is only valid for natural sound and Bluetooth.
-
Open the cover of the clock/sanitizer. Then place the item you want to sanitize inside. Close the cover and choose the sanitization cycle you want to use.
-
Standard clean cycle (around 10 minutes): Press the “UV” button once to start the standard sanitization cycle. The UV indicator on the cover turns red during sanitization and the number “10” appears on the clock display denoting the sanitization time is 10 minutes. The UV indicator turns off when the sanitization is completed.
-
Deep clean cycle (around 20 minutes): Press and hold the “UV” button until the UV indicator on the cover flashes twice. The UV indicator on the cover turns red during sanitization and the number “10” appears on the clock display denoting the sanitization time is 10 minutes. The UV indicator turns off when the sanitization is completed.
-
To stop sanitization before the cycle is complete: Press the UV button. The UV indicator on the cover flashes three times to indicate the cycle has stopped and it’s safe to open the cover.
Notes:
-
Please remove the protective film by following the direction shown on the label.
-
The UV indicator flashes if the cover is open when you try to start sanitization. For your safety, the sanitizer cannot proceed with sanitization if the cover is open. Make sure the cover is completely closed, then press the UV button again.
-
You can use a deep clean cycle even for items that don’t need it. There’s no harm done to the item ‒ it just takes longer to finish the cycle.
-
Short press the button to open the Bluetooth function and enter the automatic back connect mode for 10s, the Bluetooth light will slow flash; Without back connection after 10s, the Bluetooth light will fast flash and enter the pairing mode; Pairing and connecting successfully, the Bluetooth light will flash up and voice “Connected”.
-
Fast double press the button to enter the pairing mode; Long press the button to turn off the Bluetooth function.
-
Turn on the Bluetooth again, it connects to the last paired phone automatically.
-
The Bluetooth connected prompt tone is “connected”; the prompt tone of our range, turn off Bluetooth of device and re-pairing mode is “disconnected”.
-
Disconnected within 15 minutes and without re-connected or Pairing successfully, the Bluetooth will turn off:
a: When the device is out of range, voice “disconnected”, the product is on re-pairing mode and Bluetooth light will slow flash for 5 minutes.
b: After 5 minutes, the product will enter pairing mode, Bluetooth light will fast flash and turn off after 15 minutes without pairing. -
Turn on the Bluetooth and without pairing or connection with the device, Bluetooth will turn off automatically; Pairing or connection successfully and without any audio playing, Bluetooth will turn off automatically.
-
Restore Bluetooth factory Settings: on the Bluetooth turn off mode, long-press the “ ” button with 10s, the display will show “clr” which means the setting is successful.
-
When the alarm sounds, press the SNOOZE/PLAY-Pause bar temporarily delays the alarm another 9 minutes until you turn it off.
-
This bar also adjusts the display brightness when the device is in normal time mode. There is 3 level of brightness in the sequence of low-mid-high.
-
In Bluetooth audio mode, this bar plays or pauses playback.
A short press on the night light button to turn on the light and set up the brightness: ”Low—Middle—High”.
-
Place your wireless charging-compatible device directly on the center of the top cover.
-
The indicator light turns red while your device is charging. This indicator turns green when your device is fully charged. For some mobile device (Apple iPhone) that doesn’t have the capability to generate full charge sign, the indicator will not turn green but the device itself will stop charging when it is fully charging. Your device screen displays the charging progress.
-
Short press the button, the display will show “SPA” for 3s and the display light will light up, then enter the natural sound mode with the default music of “Wind”.
-
Short press the button, in turn, to select the natural sound music in the following order:
-
Wind > Rain > Brook > Ocean > Campfire > White Noise, the music can play recyclable.
-
The display will show the music sequence number for 3s when selecting the music.
-
Long press with 2s to turn off the music, the display will show “OFF” for 3s and the music light will turn off.
-
Short press the music button and Bluetooth button to switch between Natural Sound and Bluetooth function.
Product Feature
- 10W Fast Wireless Charger
- 2 Alarm Clock Mode
- UVC LED light Wave Length 270~280nm
- Clock, Time Memory
- CR2032 Time Memory Ba
- AC-DC Adapter: DC9V
- Dual-channel stereo Bluetooth playback, built-in 6 sets white noise, and natural music.
About the UV sterilization
Ultraviolet (UV) light is invisible to the human eye. UVC part of the
ultraviolet spectrum has been proved to have bactericidal effect, killing
bacteria and viruses. Use the appropriate safety measures for the use of this
product and follow the safety precautions.
Ultraviolet radiation on porous parts or objects that are resistant to
ultraviolet light has the opportunity to reduce the effect of disinfection, as
they create many shadows that may prevent UV rays from hitting surfaces.
Ultraviolet rays kill only the bacteria that hit the surface.
Warranty
Shenzhen Great Power Innovation and Technology Enterprise Co., Ltd. (the
“Company”) warrants to the original retail purchaser of this product or any
part thereof, under normal use and conditions, be proven defective in
materials or workmanship within one year from the date of original purchase,
such defect(s) will be repaired or replaced with new or reconditioned products
(at Company’s option) without charge for parts and repair labor. To obtain
repair or replacement within the terms of the warranty, the product should be
delivered with proof of warranty coverage (e.g. dated bill of sale),
specification of the defect(s), transportation prepaid, to the company. For the
details of after-sales support and return address, please call the customer
service: 0755-21671965.
Any action for breach or any warranty hereunder, including any implied
warranty, must be brought within a period 12 months from the date of original
purchase. In no case shall, the company be liable for any consequential or
incidental damages whatsoever. No person or representative is authorized to
assume for the Company any liability other than expressed herein in connection
with the sale of this product.
Manufacturer: Shenzhen Great Power Innovation and Technology Enterprise Co.,
Ltd.
Manufacturer Address: No. 331, No. 335, Guiyue Road, Dafu Community, Guanlan
Street, Longhua District,
Shenzhen
Distributor: Shenzhen Tianxingtai Optronics Technology Co., Ltd.
Customer Service Tel: 0755-21671965
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IC Caution:
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
This device may not cause interference.
This device must accept any interference, including interference that may
cause undesired operation of the device.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with RF exposure guidelines, This equipment should be
installed and operated with a minimum distance between 20cm of the radiator
your body: Use only the supplied antenna.
FCC ID: ZY9-A20180
Manufacturer’s Name: Shenzhen Great Power Innovation And Technology Enterprise
Co., Ltd.
Model number: GP-A289
Operating Temperature: -10° C to 55° C
This device was tested for typical body-worn operations. To comply with RF
exposure requirements, a minimum separation distance of 20mm must be
maintained between the user’s body and the handset, including the antenna.
Third-party belt clips, holsters, and similar accessories used by this device
should not contain any metallic components. Body-worn accessories that do not
meet these requirements may not comply with RF exposure requirements and
should be avoided. Use only the supplied or an approved antenna.
This device is in compliance with the essential requirements and other
relevant provisions of Directive 2014/53/EU. All essential radio test suites
have been carried out.
- Use care with the earphone may be possible excessive sound pressure from earphones and headphones can cause hearing loss.
- CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
- The product shall only be connected to a USB interface of version USB 2.0
Function
BT WPT
EU Operation Frequency
2402~2480 MHz
110kHz~205kHz
Max RF output power:
3.18dBm 10dBm.
-19.39dBuA/10m
Limit
10dBm.
66.02 dB/10m
Documents / Resources
|
WanYin A20180 UVC Sanitizer with Wireless Charger and Sound
Machine
[pdf] Instruction Manual
A20180, ZY9-A20180, ZY9A20180, A20180 UVC Sanitizer with Wireless Charger and
Sound Machine, A20180, UVC Sanitizer with Wireless Charger and Sound Machine
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>