Shenzhen Starfish Electronics BX106 Wireless Dual Mode Mouse User Manual
- June 6, 2024
- Shenzhen Starfish Electronics
Table of Contents
Shenzhen Starfish Electronics BX106 Wireless Dual Mode Mouse
Instructions to the keys
- Main Specifications:
- Frequency: Z`12402-2480 MHZ
- Bluetooth version: V4,2
- Mouse size:112•57•27MM
- Working distance:8-1 0 meters
- Working angle:360 degrees
- Resolution:800/1200/1600 dpi
- 2.4Gwireless mouse mode with dongle
- Bluetooth mode without dongle
- 3 level automatic power-saving
installation/connection method
-
insert the Nano receiver into the computer U SB
-
Turn on the power switch to 2.4G; Just wail a few seconds and the 2.4G wireless Settings can work ::0, Bluetooth installation/connection method:
-
Turn on the power switch of the mouse to Bluetooth, the Bluetooth indicator will Flash, enter the Blue tooth pairing state, and the connection will be completed Automatically;
-
Turn on the power switch of the mouse to Bluetooth, and the Bluetooth indicator will flash slowly. Please turn on the Computer Bluetooth, enter the state of Searching Bluetooth devices, and the connection will be completed by automatic pairing;
-
Mode switching:
After the computer is plugged into the receiver, the power switch of the mouse is pulled out to the 2.4g position, and the 2.4g receiver is automatically connected after the power is switched
back on; And the computer does not plug in the receiver, the mouse power switch to the Bluetooth place, reconnect the Bluetooth: -
Remark:
This mouse can be connected with either 2.4G wireless or Bluetooth. But. only one connection can be established at one time. -
Package Included:
1 wireless mouse
1dongle
1user manual
1 charging cable
System applied :
Win7/8/8.1/10 and Mac 1 0.X
Warning Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for
compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>