Shenzhen Bestree Technology 9601G MP5 and FM Receiver Instruction Manual

Instruction Manual
MP5 & FM Receiver
7.0 inch TFT LCD & Manual Telescopic
9601 9601G

HOME

In the taskbar to enter the main menu interface.

1. Click here to enter the radio player interface.
2. Click here to enter the music player interface.
3. Click here to enter the video player interface.
4. Click here to go to the photo browsing interface.
5. Click to go to AV IN interface.
6. Click to go to aux input interface.
7. Click here to go to the Bluetooth player interface.
8. Click to go to the GPS interface.
9. Click to go to the prev/next page.
10. Click here to adjust the screen brightness and off-screen.
11. Click to go to the System Settings interface.

MUSIC

In the main menu interface, touch the MUSIC icon to enter the music state.
Features taskbar icon

1. Click here to enter the menu setting.
2. The volume regulation, paddling can adjust the volume.
3. Return
4. Enter the main menu
5. Click here to play the prev/next song.
6. Click here to play/pause.
7. Click here to Shuffle.
8. Click here loop.
9. Playback progress display.

PHOTO

In the main menu interface, touch the PHOTO icon to enter the photo state.

1. Click here to play the prev/next picture.
2. Click here to play/pause.
3. Click here to zoom in.
4. Click here to zoom out.
5. Click here to rotate the image.

VIDEO

In the main menu interlace. touch the VIDEO icon to enter the video state.

1. Click here to play the prey/next video.
2. Click here to play/pause.
3. Click here loop.
4. Click here to Shuffle.
5. Playback progress display. Touch paddling can fast forward and rewind.
6. Next page

RADIO

In the main menu interface, touch the RADIO icon to enter the radio state.

1. Click here to manually scan the radio.
2. In radio state, each band has six frequency points. press any frequency, you can store your favorite radio stations.
3. LOC/DX Switch
4. Stereo
5. Press to automatically search for radio stations and store the FM I- FM2- FM3 IS radio stations, short press to navigate through the radio.
6. Band Switch

BT

In the main menu interface. touch the BT icon to enter the Bluetooth state. 6.1 Click into the dial-up interface.

1. Bluetooth dial number keys can be used to enter a phone number to dial.
2. Backspace
3. Bluetooth is available under the call state will host the button to switch the sound to the phone.
4. hang up the phone.
5. Dial/answer a call.

6.2 Click to go to the call log interface

1. Missed record, received record dial record list.
2. Received record
3. Dial record
4. Missed record

6.3 Click into contact interface

6.4 Click to go to the Bluetooth music interface.

1. Prey / Next.play /pause function.

SETUP

In the main menu interface, touch the SETUP icon to enter the setup state.

1. Click to sound settings.
2. Click on the language Set up.
3. Other settings.
4. Click to go to the radio region selection.
5. Click on the steering wheel control settings.
6. Click to set the time.

7.1 Touch Radio Area, select the radio region.

7.2 Touch TIME. into the time setting.

1. Touch to set the time and date
2. 12/24 standard switch

7.3 Touch Wheel Control. Steering wheel control interface.

Enter the learning state:

1. long-press button on the steering wheel use the left hand, then touch screen corresponding function use the right hand, make it highlight. mean learn OK;
2. When the teaming was completed, click Confirm.
3. When learning has failed, it should not respond in the steering wheel.
4. If an operating mistake in the learning process. Click Reset to re-learning.

7.4 Other settings interface.

1. Software Update
2. Factory Data Reset
3. Calibration
4. Background Set

7.5 Touch Language, select the national language.

CPS NAVIGATION (Optic)NA)

In the main menu interface, touch UPS icon to enter the Navigation.

AUX-IN

In the main menu interface, touch the aux-in icon to enter the aux-in state.

AV IN

In the main menu interface, touch av in icon to enter the av in the state.

INSTALLATION

PRECAUTIONS

•  Choose the mounting location carefully so that the unit will not interfere with the normal driving functions of the driver.
• Avoid installing the unit where it would be subject to high temperatures. from direct sunlight or hot air from the heater, or where it would he subject to dust, din or excessive vibration.
• Use only the supplied mounting hardware for a safe and secure installation.
• Adjust the mounting angle as desired.

MOUNTING EXAMPLE
Installation In the dashboard

Note: Keep the release Key the safe places your may need it in the future to remove the unit.

WARNING

Use the specified amperage fuse for each lead. Using a higher amperage fuse may cause serious damage.

FEATURES

The unit Features MPS/USD/SD Ports and 7.0 inch TFT LCD

• Electronic Pll Tuning Control with 18 Programmable Stations
• MP3/WMA Compatible
• Preamplified Line-out
• Front Audio Aux-in
• USB Pon and SD/MMC Input
• Last Track Memory (RADIO & SD/MMC & USB)
• 7.O inch TFT LCD

SPECIFICATIONS

FM TUNER
Frequency Range: 87.5-108MHz
Sensitivity: 10 dBu
I.F. Frequency: 10.7 MHz
Frequency Response: 80Hz – 12kHz (±3dB)
Stereo Separation:  >25dB
S/N Ratio: >50dB
GENERAL
Power Supply Voltage: 12 V DC. Negative Ground
Max Current Consumption: 15 A
Max Output Power: 4 x 55W
Note: Specifications and the design are subject to possible modification without notice due to improvement.

REMOTE CONTROL GUIDE

1. Power/Mute
2. SRC & End Call
3. Play/Pause Band(switch for FMI-FM2-FM3) & Answer Call
4. Prey
5. Next
6. AMS
7. Vol –
8. Vol+
9. Audio & NO.
10. A.V.P.
11. System Menu
12. NO.1
13. NO.2
14. NO3
15. NO4
16. NO.5
17. NO.6
18. NO.7 &RPT
19. NOS & INT
20. NO.9 & SUB-T

LOCATION OF CONTROL

1. PWR: Power ON/OFF
2. MODE: Function Selector (radio/usb/sd/aux-in/bt) & End Call
3. AMS: Auto Seek Search Tuning
4. BAND: Band Button (FM I-FM2-FM3) & Answer Call
5.  Short press: /  Prev/Next,
6. Long press: Fast forward / rewind; Manual Auto-Search Radio
7. SD : Micro SD Card Slot, GPS navigation map card slot (optional model)
8. AUX IN: AUX IN Jack 9. USB: USB Port
9. LCD: LCD Display
10. VOL/SEL: Volume / Select Control
11. MUTE: Mute ON/OFF
12. DISP: Clock Display
13. EQ: Flat-pop-classic-rock / NAVI: Enter the navigation interface (optional model)
14. ↵Return to the previous level

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>