Helidallr 4K 30MP 30FPS Trail Camera Game Camera User Manual
- June 6, 2024
- Helidallr
Table of Contents
According to the usage scenario and working concept, this system only supports instant communication through WiFi hotspot function (each time you disconnect you have to do the following to reconnect to the WiFi hotspot and will not connect automatically like a mobile phone will remember how home WiFi works by default). And in line with the principle of power-saving concept, this system does not support uninterrupted working all the time.
Working definition.
The phone is ultimately connected to the camera via a WiFi signal, not
Bluetooth, and only wakes up the WiFi function with the help of Bluetooth.
And it supports browsing and downloading, as well as deletion on the phone
through the APP.
The camera WiFi is a hotspot and currently only supports connection to
matching software for peer-to-peer connection with the phone, no intermediate
bridging is supported and no access to home WiFi is possible.
There are two ways to turn on the camera’s WiFi hotspot: ①, manually turn on the WiFi hotspot function, i.e., without waking up via the Bluetooth function, manually press the “up” multi-function button to turn on the WiFi hotspot function, this method can only be used when the camera is in the “setup This can only be done when the camera is in the “setup” state. ②, without manually turning on the WiFi hotspot (i.e., without manually pressing the camera’s “up” multi-function button), first by connecting to the camera’s Bluetooth function and then waking up the camera’s WiFi function (Bluetooth consumes much less power than WiFi, so the Bluetooth function is always on by default, while the WiFi function is not always on) This is especially true when the camera is “on”. If the camera is “on”, you can only use this method to turn on a WiFi hotspot.
Working conditions and procedure.
Both the phone and the camera need to be fully charged and the Android phone
needs to be above 5.0. The software does not support running on tablets.
In rare cases, the software package may change its name, or the package may be
temporarily removed from the market, making it impossible to find the package
by searching for the name or scanning the code. In this case, an alternate QR
code can be provided to the user to support the download and installation, or
the software installation package can be sent directly.
After the WiFi hotspot is turned on, users can find the camera’s WiFi hotspot
name in the list of WiFi hotspots, select the corresponding name, and enter
the correct password to connect. The default duration of the WiFi hotspot is 1
minute before it is connected to the phone, and it will be turned off
automatically after the time limit. If you want to continue connecting to the
WiFi function, you need to turn on the hotspot function again. Some phones
need to turn on the location service function to use the APP/apk normally, and
some phones may return to the APP after the first connection to indicate no
network connection, so you need to turn off the 4G function, restart the
software and reconnect to WiFi to use the APP/apk normally, otherwise, the
WiFi connection may be interrupted, and browsing and downloading may not be
possible, or the page may even get stuck. Some older phones may not support
the installation of this application.
Bluetooth and WiFi are short-range wireless transmission protocols. A suitable
WiFi working distance is within 10 meters and should be in an open area
without obstacles and shields, otherwise, it will reduce the communication
distance and communication speed.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>