Shenzhen Lead Technology LD809 Long Distance Wireless Charger Instruction Manual
- June 6, 2024
- Shenzhen Lead Technology
Table of Contents
Shenzhen Lead Technology LD809 Long Distance Wireless Charger
Product list
- Wireless charger
- Power adapte
- Magnet(Optional)
- User manual
- Desk sticker
- Screws
Product Profile
This product is a wireless charger compatible with Qi standard wireless charging mobile phones such as Apple, Samsung, Huawei, and X iaomi. It can be installed under the table top of non-metallic materials such as marble, wood, plastic and acrylic board.
Product Parameters
Product model: long distance wireless
- charger
- Wireless charging output: !OW Max
- Material: PC+ABS
- Input: 12V/1.5A
- Colour: Black
- Charging distance:15mm Max
- Dimension: 98.598.518mm
Product Light Indication
Installation Instructions
- Paste the sticker on the desk.
- Place a magnet in 1he center of the desktop sticker, and place another magnet at the bottom of the desktop. Mark 1he bottom and remove the magnet after attracting each other.
- After tearing off the double-sided tape, align the mark of the magnet to fix and adhere.(lf you need to fix the screws, follow the picture below)
Important step, do not skip
Reminders
- The best use environment temperature should be below 25 “C, do not use in high temperature environment.
- Only support Qi standard wireless charging mobile phones, non-Qi standard wireless charging mobile phones cannot be wirelessly charged. No compensation will be made for damage.
- If the charging is interrupted or unable to be charged due to other factors, please move the phone away from the charging area and place the sticker center to charge again.
- When the host is in standby or working, there is metal near the charging area, the wireless charger will stop charging. Need to remove the phone and metal, stand still for 5 seconds and then recharge
Cautions
- Do not install under a metal tabletop.
- To ensure product performance, please use the original adapter.
- Please install the product according to the installation diagram to avoid affecting the charging effect.
- The charging distance between the device and the mobile phone should be greater than 8mm, otherwise the mobile phone will be damaged.
- Do not install the product in a high temperature environment or around heating equipment to avoid high temperature damage.
- Do not disassemble or modify the equipment, so as not to cause damage to the equipment, leakage, etc., and cause safety accidents.
- Do not drop, squeeze or puncture the device, and avoid damage to the device caused by excessive external pressure.
- When charging, do not place metal products, bank cards, bus cards, ID cards and other magnetic cards in the charging area.
- This equipment and accessories contain some small parts, please place them out of reach of children. Children may accidentally swallow small parts and cause other hazards such as suffocation.
- The radio waves generated by the equipment may affect the normal operation of implanted equipment or personal medical equipment, such as pacemakers, cochlear implants, hearing aids, etc.
If you want to use these devices, please consult the manufacturer for restrictions on using the devices.
FCC statement:
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter. During the operation of
device a
distance of 15 cm surrounding the device and 20 cm above the top surface of
the device must be respected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>