adastra BH Series 100919UK Background Speakers User Manual
- June 6, 2024
- Adastra
Table of Contents
BH Series 100919UK Background Speakers
User Manual
Introduction
Thank you for choosing the Adastra BH series speakers for your sound
installation.
These durable cabinets deliver reliable, high-quality sound output for music
and announcements. Please read the following guidance notes for correct
installation.
Contents
| 2 x BH series background speakers | 4 x cross-head screws |
|---|---|
| 2 x steel speaker brackets | 4 x speaker screw caps |
| 2 x plastic wall plates |
Specifications
| Model | BH4 | BH5 | BH6 | BH8 |
|---|---|---|---|---|
| White stock ref. | 100.918UK | 100.920UK | 100.922UK | 100.924UK |
| Black stock ref. | 100.919UK | 100.921UK | 100.923UK | 100.925UK |
| Impedance | 8 | |||
| Dispersion angle | 120° | |||
| IP rating | IP44 | |||
| Power handling max | 60W | 100W | 140W | 160W |
| Power handling rms | 30W | 50W | 70W | 80W |
| Frequency response | 100Hz – 20kHz | 80Hz – 20kHz | 50Hz – 20kHz | 30Hz – 20kHz |
| LF driver | 100mm0 (4″) | 135mm0 (5.25″) | 165mm0 (6.5″) | 200mm0 (8″) |
| HF driver | 13mm(Z) (0.5″) | 13mm0 (0.5″) | 25mm0 (1″) | 25mm0 (1″) |
| Sensitivity | 88dB | 89dB | 90dB | 90dB |
| Dimensions (each) | 195127126mm | 255163160mm | 290195190mm | 378244240mm |
| Weight (each) | 1.23kg | 1.98kg | 2.70kg | 3.98kg |
Installation
- Unscrew the plastic wall plate from the speaker bracket and mark out, drill, and fix to the wall as required.
- Line up the steel speaker bracket against the plastic wall plate at the required tilt angle and secure using the 2 screws provided through 2 of the punched holes.
- Locate the speaker into the speaker bracket and secure using the screw caps provided on the top and bottom (Do not over-tighten)
- Adjust the horizontal angle (pan) of the speaker by loosening the screw caps, turning the speaker, and re-tightening the screw caps.
- Remove the cover on the rear of each speaker to reveal the spring terminals.
- 6. Each BH speaker has 8Ω impedance. Ensure the total load connected to each output channel is no lower than the minimum stated for the amplifier. Connect 1 BH speaker for an 8Ω load or connect 2 x BH speakers in parallel for a 4Ω load
- Use good quality 2-core speaker wire capable of carrying the rated power and connecting to the speaker terminals. Strip back the insulation, press down the terminal, thread the wire through the terminal post, and release to grip the bare wire.
- If installing in sheltered outdoor areas, fit the cover over the rear terminal cavity to protect the wiring from moisture.
- Connect the + and – terminals on the speaker to the relative outputs on the amplifier as shown in the diagram above.
Disposal: The “Crossed Wheelie Bin” symbol on the product means that the product is classed as Electrical or Electronic equipment and should not be disposed of with other household or commercial waste at the end of its useful life. The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted. Copyright© 2021.
AVSL Group Ltd. Unit 2-4 Bridgewater Park, Taylor Rd. Manchester. M41 7JQ
AVSL (EUROPE) Ltd, Unit 3D North Point House, North Point Business Park, New
Mallow Road, Cork, Ireland
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>