Wuhu Tyrehub Intelligent Technologies HB04 Hand-Held Tire Tread Depth Intelligent Scanner User Guide

Table of Contents

Intelligent Scanner

Power button
- Power on: long press the button until the screen lights up.
- Power off: long press the button and click “Power-off” on screen.
- Restart: long press the button and click “restart” on screen. Scan button
Long press the button to start scanning, and release the button to complete the scanning process.
Charging port Micro-USB Charging supported.
Scanning window Please keep the optical glass clean to avoid inaccurate measurement during scanning process.
Cooling fin For heating dissipation.
Slider Keep distance between tire and device, to avoid broken and dirty of scanning window’s glass.
Camera For car license plate No. and VIN code scanning.

Step 1: Download App from http://everet.eae-ae.com/login; and install “Leadshub”; /OS: Search and download “Leadshub” at App store.(China Market)
Step 2: Use device to scan the QR code that generated by “Leadshub” during the device bingding process.

Attention:

Operating area : Device scanning window always needs to be fitted with tyre surface during scanning.
Operating direction : From tire inner to tyre outerside.
Start &ending point: Scanning window should be on the outer side of tyre shoulder.
Speed: 5-6 seconds by sliding smoothly

Notes:

During scanning, if you want to re-testing any tire, please click” C” to re-testing.
lf the technician needs supplementary detection information, it can be filled in “Diagnosis Supplementary”.

WIAN : Switch ON/OFF wifi function, connect wireless network in this area
APN : Setting Access point names.
Brightness : User can adjust device brightness according to the using environments.
Sleep : User can adjust device sleep duration according to using habit.
Current version : Display device current version.
Device code : Display the device code, click the code to execute the device unbind operation.
Language : Switch the device display language.

It has 2 ways to check reports:
View it on the device side

After finished inspection, device screen will jump to report page automatically;
User can check report at history function
Scan the QR code in the report to get the digital inspection report.

Check reports at web site.
User can log on website ( http://everet.eae-ae.com/login ) to check report.

Wuhu Tyrehub Intelligent Technologies HB04 Hand-Held Tire Tread Depth
Intelligent Scanner 9

How to scan unlicensed car?
You can key in customized information to continue scanning process.
It has some groove missing during measurement,eg. Tire has 4 grooves,but device displayed 3 grooves.
Sliding gesture and speed is important during measurement, if groove missing happened, you can adjust sliding gesture and speed, and re-inspect again.
After submit the report,it only has single page report displayed on screen.
Device will produce a simple report if the network condition is bad. When the network return to normal, it will resubmit report and user can check the detail report in history
The device displayed no data after tread depth measurement finished.
Please keep scanning window clean
Re-inspection” reminder
If the slide speed is too fast or too slowly, device will display this message after tire inspection finished. User need to adjust slide speed and gesture, try again.
Red light always displayed at device top right corner, and it cannot return to green lights.
Please unplug the charging cable before start/restart the device.

Read User Manual Online (PDF format)