emerio CH-111018.3 Convector Heater Instruction Manual

: June 6, 2024
: emerio

Table of Contents

emerio CH-111018.3 Convector Heater
INSTRUCTION
PARTS DESCRIPTION
TECHNICAL DATA
- ERP information
Read User Manual Online (PDF format)
Download This Manual (PDF format)

emerio CH-111018.3 Convector Heater

INSTRUCTION

Important:
read this instruction fully before using the heater; retain these instructions for future reference. This product is only suitable for well insulated spaces or occasional use.

ASSEMBLY OF THE HEATER
Before using the heater, the feet (supplied separately in the box) must be fitted to the unit. These are to be attached to the base of the heater using the 4 self-tapping screws provided, taking care to ensure that they are located correctly in the bottom ends of the heater side moldings.

SAFETY INSTRUCTIONS (READ BEFORE OPERATING THE HEATER)

Read and save these instructions. Attention: pictures in the IM are for reference only.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
Children of less than 3 years should be kept away unless continuously supervised.
Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.
CAUTION — Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
This appliance is intended to be used in household and similar applications.
Do not use the heater unless the feet are correctly attached.
Ensure that the power supply is plugged in accordance with the rating label on the heater; the socket must be earthed.
Keep the mains lead away from the hot body of the heater.
The heater is not intended for use in bathrooms, laundry areas or similar indoor locations. Never place the heater where it may fall into a bathtub or any other water container.
Do not use outdoors.
Do not cover or obstruct any of the heat outlet grilles or the air intake openings of the heater.
Do not place the heater on carpets with a very deep pile.
Always ensure that the heater is placed on a firm level surface. Ensure that the heater is not positioned close to curtains or furniture as this could create a fire hazard.
The heater must not be located immediately below a socket outlet.
Do not insert any object through the heat outlet or air intake grilles of the heater.
Do not use the heater in areas where flammable liquids are stored or where flammable fumes may be present.
Particular care should be taken when the heater is situated in areas occupied by children or disabled persons.
Always unplug the heater when moving it from one location to another.
Do not use the heater if the power cord is damaged.
Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
WARNING: In order to avoid overheating, do not cover the heater.
The appliance should not be operated by means of an external timer-switch or by means of a separate system with remote control not originally belonging to this appliance.
This heating device is not suitable for assembling in vehicles and machines.
Means “DO NOT COVER “.

PARTS DESCRIPTION

Air outlet
Power switch (750W; 1250W; 2000W)
Thermostat
Air inlet
Handle
Feet

OPERATION OF THE HEATER
Note: When the heater is turned on for the first time, or when it is turned on after a longer period of storage, it is normal that the heater may emit some smell and fumes. This will disappear when the heater has been on a short while.

Set the thermostat to the minimal position and insert the plug to the power supply.
Turn on the power switch: 750W, 1250W, 2000W.
Turn the thermostat knob in a clockwise direction to the max position.
Once the room temperature has reached the desired value, turn the thermostat knob slowly in anti-clockwise direction until you hear a “click” sound; this is the setting temperature.
The appliance will automatically maintain the setting temperature. It will switch on when the room temperature is below the setting, and switch off if it is above the setting.

CLEANING THE HEATER
Always unplug the heater from the wall socket and allow it to cool down completely before cleaning. Clean the outside of the heater by wiping with a damp cloth and with a dry cloth. Do not use any detergents or abrasives and do not allow any water to penetrate the heater.

STORING THE HEATER
When the heater is not used for a long time it should be protected from dust and stored in a clean dry place.

TECHNICAL DATA

Operating voltage: 220-240V ~ 50-60Hz
Power consumption: 1800-2000W

GUARANTEE AND CUSTOMER SERVICE
Before delivery our devices are subjected to rigorous quality control. If, despite all care, damage has occurred during production or transportation, please return the device to your dealer. In addition to statutory legal rights, the purchaser has an option to claim under the terms of the following guarantee: For the purchased device we provide 2 years guarantee, commencing from the day of sale. If you have a defective product, you can directly go back to the point of purchase. Defects which arise due to improper handling of the device and malfunctions due to interventions and repairs by third parties or the fitting of non-original parts are not covered by this guarantee. Always keep your receipt, without the receipt you can’t claim any form of warranty. Damage caused by not following the instruction manual, will lead to a void of warranty, if this results in consequential damages then we will not be liable. Neither can we hold responsible for material damage or personal injury caused by improper use or if the instruction manual are not properly executed. Damage to accessories does not mean free replacement of the whole appliance. In such case please contact our service department. Broken glass or breakage of plastic parts is always subject to a charge. Defects to consumables or parts subjected to wearing, as well as cleaning, maintenance or the replacement of said parts are not covered by the warranty and are to be paid.

ENVIRONMENT FRIENDLY DISPOSAL
Recycling – European Directive 2012/19/EU
This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
Manufactured by: Emerio Deutschland GmbH Lerchenweg 3, 40789 Monheim am Rhein, Deutschland

ERP information

Supplier: Emerio Deutschland GmbH
- Lerchenweg 3
- 40789 Monheim am Rhein
- Deutschland
Declare that the product detailed below:

Information requirements for electric local space heaters

Model identifier(s):

space heaters only (select one)

Nominal heat

output

| Pnom| 1.80-

2.00

| kW| manual heat charge control, with

integrated thermostat

| No
Minimum heat

output (indicative)

output

| Pmax,c| 2.00| kW| electronic heat charge control with room and/or outdoor temperature

feedback

| No
Auxiliary

electricity consumption

output

| elmax| N/A| kW| Type of heat output/room temperature

control (select one)

At minimum heat

output

| elmin| N/A| kW| single stage heat output and no room

temperature control

temperature control

| No
| | | | with mechanic thermostat room

temperature control

| Yes
| | | | with electronic room temperature

control

| No
| | | | electronic room temperature control

plus day timer

| No
| | | | electronic room temperature control

plus week timer

| No
| | | | Other control options (multiple selections

possible)

| | | | room temperature control, with

presence detection

| No
| | | | room temperature control, with open

window detection

| No
| | | | with distance control option| No
| | | | with adaptive start control| No
| | | | with working time limitation| No
---|---|---|---|---|---
| | | | with black bulb sensor| No
Contact details| Emerio Deutschland GmbH Lerchenweg 3

40789 Monheim am Rhein

Deutschland

Satisfies the requirement of the Council Directives:
COMMISSION REGULATION (EU) No 2015/1188 of 28 April 2015 and Amending COMMISSION REGULATION (EU) 2016/2282 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for local space heaters Regarding information for consumers on how to install, use and maintain the product, WEEE information, please check the instruction manual provided with packaging.