Nature POWER 30058 5.8 AMP AC/DC Power Converter User Manual
- June 6, 2024
- Nature POWER
Table of Contents
Nature POWER 30058 5.8 AMP AC/DC Power Converter
WARNING: ad carefully and understand all assembly and operation instructions before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Important Safety Information
Thank you for choosing a Nature Power Product.
Save the receipt and these instructions. It is important that you read the
entire manual to become familiar with this product before you begin using it.
This product is designed for certain applications only. the distributor cannot
be responsible for issues arising from modification. We strongly recommend
this product not be modified and/or used for any application other than that
for which it was designed. If you have any question relative to a particular
application, Do not use the product until you have first contacted the
distributor to determine if it can or should be performed on the product.
For technical question please call 1800-588-0590
WARNING
- Read all instructions before operating this converter. Place instructions where they can be used forfuture operations.
- The converter will not shut off automatically. Turn off immediately after use.
- Although the converter has a fan, it will get warm with use. Do not place the converter on flammabel materials such as carpeting, upholstery or paper.
- Allow the converter to cool before storing.
- For indoor use only. Ensure the converter is always used or stored in a dry environment.
- Do not put fingres into the 12V receptacle.
- Close supervision is necessary when used around infants, children or anyone incapable of unpluggingthe converter.
- Do not use the converter to recharge batteries.
- Unplug the converter when not in use and before cleaning.
- Risk of electric shock, do not immerse the plug or converter in any liquid.
- Do not use the converter if it is wet.
- Do not use the converter with a damaged cord or plug, or if the converter has been damaged inany way.
- Do not use the converter for anything other than its intended use.
- Do not open the converter.
WARNING
This product can expose you to chemicals, including Di (2-ethylhexyl) phthalate (DEHP) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov
Parts List
| Parts Description | Quantity |
|---|---|
| Conveter | 1 |
| Manual | 1 |
Specification
Property|
---|---
Output| 12V DC / 5.8A
Input| 110-120V AC / 1.5A
Mounting Instructions
- The converter can be permanently mounted to any flat surface.
- Rotate outwards the two metal brackets on the underside of the converter to expose the screw holes. Utilize these two brackets for mounting (screws not included).
Operating Instructions
- Remove all cable ties and uncoil all of the cables before using the AC to DC powerconverter
- Plug the converter into a 110/120V AC standard wall outlet
- Note – The use of an extension cord is not recommended. If you require the use of anextension cord only use a heavy duty 12 gauge cord less than 50 feet(30.5 meters)long.
- The Red “Power On” LED will light directly when you plug converter into a 110V/120VAC outlet.
- Insert the 12V DC accessory plug from the device being operated into the converter’ssocket(Maxi-mum draw 5.8 amps or 70 watts). The 12V socket is wired so the centerconductor is positive(+) and the outer sleeve is negative(-).Note – Always confirm that the 12V plug on your chosen device is wired the same way.
- Turn on the 12V device being operated
- To disconnect, reverse the procedure.
- Note – Make sure to let the converter cool completely before storing.
Trouble Shooting
If the device is not functioning:
Confirm that the converter’s red “Power On” LED is lit, If not, check to make
sure the AC outlet is receiving power. If the AC outlet has no power, check
wall switches, breakers and fuses.
If the red LED is on and the device is not functioning:
- A. Remove, clean and reinsert the device’s 12V plug into the converter’s 12V socket to ensure a good connection.
- B. Verify the device you are looking to use is working by plugging it into a vehicle’s 12V accessory port.
- C. Check the device’s fuse (either in the 12V plug or in the device).
If the red LED is on, but goes out when the device is plugged in:
The converter is overloaded. Check the device’s power consumption
requirements.
Limited Warranty
Nature Power warrants our products to the original purchaser that this product is free from defects in materials and workmanship for the period of 1 year from date of purchase, 2 year warranted to generate up to 80% of rated power from date of purchase. In the case of product defect, contact Nature Power customer service to receive trouble shooting. If defective part or unit should be returned, a Return Authorization Number must be issued by Nature Power and the defective part or unit should be returned to the authorized location at the purchasers’ expense.
A dated proof of purchase is required to receive warranty service. Once received at authorized location and defect proves to be the result of defective material and workmanship, the defective part or unit will be replaced at warrantors’ option and returned to the original purchaser at warrantors’ expense. No refunds will be granted by the warrantor, in the event of buyer’s remorse please contact your point of purchase within and in adherence to their return policy. Refunds are granted at the retailers’ discretions.
Please contact Nature Power Products to acquire more information:
1-800-588-0590
info@naturepowerproducts.com
www.naturepowerproducts.com
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>