SOMOGYI ELECTRONIC BT WORK Radio Instruction Manual
- June 6, 2024
- SOMOGYI ELECTRONIC
Table of Contents
SOMOGYI ELECTRONIC BT WORK Radio
Functions
IMPORTANT SAFETY INSTRUCTIONS
-
Before using the product for the first time, please read the instructions for use below and retain them for later reference. The original instructions were written in the Hungarian language. This appliance may only be used by persons with impaired physical, sensory or mental capabilities, or lacking in experience or knowledge, as well as children from the age of 8, if they are under supervision or have been given instruction concerning use of the appliance and they have understood the hazards associated with use. Children should not be allowed to play with the unit. Children may only clean or perform user maintenance on the appliance under supervision. After unpacking the unit, confirm that it has not been damaged during transit. Keep the packaging away from children if it contains plastic bags or other potentially hazardous components.
-
Before using the product for the first time, please read the instructions for use below and retain them for later reference.
-
After finishing outdoor use, move it to an indoor, room temperature environment.
-
Do not connect a cable during operation! Never perform on/off switching with maximum volume! The noise generated this time can ruin the speakers.
-
In order to protect audio system from external noise, lead the cables far from the power network cables.
-
In order to protect audio system from external noise, lead the cables far from the power network cables.
-
Protect it from dust, damp, liquids, heat, moisture, frost and impact, as well as direct heat or sunlight.
-
Make sure that no foreign objects can get through the openings.
-
Do not expose the device to splashing water and do not place objects, filled with liquids e.g.: glass on it.
-
Open source of flame, like lit candle cannot be placed on the unit.
-
Do not attempt to disassemble or modify the unit, because it can cause fire, accident or electric shock!
-
In case of any malfunction, power off the device and contact a specialist.
Do not connect a mobile phone to the USB socket with the purpose of charging. -
Due to compressed files, applied compression program and USB memory quality, improper operation may occur, which is not the shortage of the device.
-
The playback of copy righted DRM files is not guaranteed.
-
Playing of supported files is not granted in all case, since it can be affected by software and hardware conditions which are independent from the manufacturer.
-
There may be differences between the different audio files, due to their different parameters of volume and sound quality.
-
Manufacturer is not reliable for the lost or damaged data, etc., even if it happened while using this product. It is recommended to make a backup file to your personal computer.
-
We do not recommend using more than 32 GB USB memory, because the management may slow down or be hindered. Only store playable files on external memory, the presence of foreign data / files can slow down the operation or cause confusion.
-
Speakers contain magnets, so do not place such objects near them which are sensitive to magnetic field (e.g.: credit card, cassette, compass …)
-
Incorrect use or installation renders the warranty void.
-
This product has been made for residential use, it isn’t an industrial, professional tool.
-
If the product has expired, it is considered as hazardous waste. Handle in accordance with local regulations.
-
Somogyi Elektronic Kft. certifies that this radio equipment conforms to directive No. 2014/53/EU. Full text of EU Declaration of Conformity is available on the following address: [email protected]
-
Due to continuous improvements the design and specifications may change without any prior notice. The actual instruction manual can be downloaded from www.somogyi.hu website.
-
We don’t take the responsibility for printing errors and apologize if there’s any. IPX5 Protected against water jets from all directions.
To prevent possible hearing loss, do not listen to it at high volme for
extended period of time.
The product is not a toy. Keep out of reach of children.
DISPOSAL
Waste equipment must be collected and disposed separately from household
waste because it may contain components hazardous to the environment or
health. Used or waste equipment may be dropped off free of charge at the point
of sale, or at any distributor which sells equipment of identical nature and
function. Dispose of product at a facility specializing in the collection of
electronic waste. By doing so, you will protect the environment as well as the
health of others and yourself. If you have any questions, contact the local
waste management organization. We shall undertake the tasks pertinent to the
manufacturer as prescribed in the relevant regulations and shall bear any
associated costs arising.
DISPOSING OFALKALINEAND RECHARGEABLE BATTERIES
Batteries, whether alkaline or rechargeable, must not be handled together with
regular household waste. It is the legal obligation of the product’s user to
dispose of batteries at a nearby collection center or at a retail shop. This
ensures that the batteries are ultimately neutralized in an environment-
friendly way.
FEATURES
- For outdoor and indoor use
- Ideal multimedia besides work, in the garden, on the beach
- Rear, white light LED lamp
- Wireless BT connection
- Listen to music from your mobile device, computer
- MP3 playback from USB device
-
- FM radio, with telescopic antenna
- Microphone input, KARAOKE function (6,3mm)
- Wired audio AUX input (3,5mm) ● Built-in battery with automatic charging
- Charge status on the display and charging indicator LED
- Extremely long operating time on a single charge
- Expected charging/operating time: 9h / 30h
- Continuous, colorful LED light effect
- Massive, water resistant and shockproof
- IPX5: can resist water jets, from any direction
- Wideband speaker, 25W
- Accessory: microUSB charger cable (~1,0m), 3,5/3,5mm audio cable (~0,6m)
- Dimensions: 400x290x170mm/2,2kg
USE
This device is designed for outdoor and indoor use. Increased resistance to
moisture, water and shock. Ideal for use while working, but also a useful
companion for garden party and other outdoor programs. In addition to radio,
BT, USB music player and karaoke functions, it also has a built-in LED lamp.
External devices such as: mobile phone, computer, CD / DVD player, musical
instrument, microphone can be connected directly to the AUX and MIC inputs…
Its built-in battery allows it to be operated for a long time without mains
voltage.
POWER SUPPLY, CHARGING THE ACCUMULATOR
The battery must be charged before first use. Connect the supplied microUSB
connection cable to the socket under the rubber cover and the other end to a
USB adapter, mobile charger, computer or other device with a USB socket.
Leave the loudspeaker switched off. During charging – next to the volume
control – a small red LED lights up, which goes out after full charging. Then
unplug the power cord and use the device. When the battery is completely
discharged, the charging time is approximately 9 hours. This provides approx.
30 hours of operation from the internal battery at medium volume. This also
depends on the volume set, the mode selected and the ambient temperature. The
test was performed by listening to the radio at room temperature. It can also
be charged during use, but this increases charging time and can cause
additional noise. The test was performed by listening to the radio at room
temperature. It can also be charged during use, but this increases charging
time and can cause additional noise. „LO” appearing on the display and the
”Low battery, please charge” announcement warns to charge. This is also
indicated by the declining volume and poorer sound quality.\
- Switch off and unplug the charging cable after charging and use.
- Only leave connected after a full charge if the device is running continuously. Charging may occasionally cause noise in the speakers and degrade the quality of radio reception. This device is designed to be used with a battery, it is recommended to recharge it after use.
- The automatic battery charger works when the device is switched off. Therefore, disconnect the charging cable after charging is complete.
- Charge status indicator: when switched on, the battery symbol on the right side of the display shows the battery status. This symbol changes towards the end of the operating time.
- For longer life, keep the battery charged, even when not in use.
- The battery used is a lithium-ion type. It requires no maintenance. At the end of its service life, it can be replaced by a specialist after removing the control panel. The cover is fixed with screws.
INSTALLATION
Make all connections (AUX, MIC) when the device is switched off and the
external devices to be connected must also be switched off. Make sure that the
connections and polarity of the connectors are correct. Keep the microphone
cable and audio connection cable away from the power cords.
Turn on with the rotary knob on the right, then increase the volume slightly.
After the HI greeting, the wireless BT switches to connection mode. If you
have previously paired an external BT device with it – and it is nearby – the
connection will be made automatically.
FUNCTION CHANGE
The function to be operated can be selected by pressing the MODE button: BT-
USB-FM-AUX-BT…
Available multimedia functions: wireless BT connection, USB MP3 player, FM
radio, AUX (LINE) audio input, external microphone input.
- USB and / or AUX mode cannot be selected if no data storage is connected with songs and / or external audio device with a 3.5 mm plug.
- The various functions are indicated by an English voice announcement.
- When used outdoors or in a dusty, humid place indoors, keep the rubber cover carefully closed.
THE MAXIMUM VOLUME
Every speaker must be eased into working before proper usage. In the first 30-50 operation hours it should only run at 50% capacity! At higher volume levels – in some cases – there may be distorted, low-quality sound. This can be caused by the too large input signal. To avoid this, reduce the signal level of the particular external equipment or if necessary the main volume (VOLUME). The system’s maximum volume is that which can still be heard without distortions.
- By further increasing the volume, there is no increase in output power, or even the distortion of the system increases! This is harmful to the loudspeaker and may cause malfunction!
- When connecting a microphone, place it as far away from the speaker box as possible to prevent excitation. Do not point the speaker at the microphone, as excitation may damage the speaker. When using a microphone, carefully increase the volume, and if you experience excitation, immediately rewind the control and, if necessary, move the speaker to another position.
WIRELESS BT CONNECTION
The device can be paired to other devices with BT protocol within a range of
up to 10 meters. After that, you can listen to music played on mobile phone,
tablet, notebook and other similar devices hands-free. Select BT function with
the MODE button. Search for the speakers nearby including this speaker, the
way it’s written in the instruction manual of the device to be paired. Connect
the two devices together. After successful connection, the BT indicator
flashing until then can be read continuously on the display. Thereafter, the
desired program can be heard from the speaker in good quality. The player
device (e.g. the mobile phone) can usually be remotely controlled by pressing
briefly the / / buttons.
If you receive a call on your phone in the meantime, the music will pause.
Answer the call as usual with your phone, and after the conversation ends, you
can resume playing music. You cannot listen to the telephone conversation on
the radio.
- You can adjust the sound to suit your needs with the equalizer application installed on your mobile phone. Also make sure that the multimedia volume control on your phone is set correctly. Low levels can cause more noise, too high levels can cause distortion. The setting must be made in accordance with the speaker volume control.
- A speaker can be paired with one BT device at the same time.
- If your phone asks for a password during pairing, enter “0000”.
- Press and hold to switch the BT connection on and off.
- After turning on, it will automatically reconnect to a previously paired and properly connected device if it is turned on nearby.
- If wireless connection is interrupted, if necessary, keep pressing the MODE button, until it’s back to BT function, and pairing mode activates again.
- When a phone call is received on the connected mobile phone while listening to music, music playback pauses. After the conversation, start the continuation of playback on the phone if it does not happen automatically.
- The actual range depends on the other device and the ambient conditions. (e.g. walls, human bodies, other electrical devices, movement …)
- Abnormal operation, noise can be caused by the electrical appliances nearby, this does not indicate a malfunction of the device!
- Abnormal operation may be caused by the specific features of the external device, which does not indicate a malfunction of the device! Occasionally, the BT function may operate limited due to the specific features of the external device.
- Charging may occasionally cause noise in the speakers and degrade the quality of radio reception. This device is designed to be used with a battery, it is recommended to recharge it after use.
MP3 PLAYBACK FROM USB STORAGE
The player is ready for use when the unit is turned on. Carefully insert the
USB storage device and the unit will automatically switch to MP3 playback
mode, then playback will start. The display shows USB and shows the elapsed
time of the current track and the track number when scrolling. Press the
button to start playback, but it will also start automatically after inserting
the external device. Use the same button to pause playback (PAUSE) or use the
scroll buttons to select the desired track. Pressing and holding the latter
will perform a quick search within the current track.
- When turned on, you can resume playing the last track you listened to.
- The recommended file system for memory is: FAT32. Do not use NTFS formatted memory unit!
- If the unit does not output sound or the USB memory is not recognized, remove it, then reconnect the memory and select it again with the MODE button. If necessary, switch the device off and on again!
- Only remove the external memory after you have changed to a different source with the MODE button or you have switched off the player! Otherwise, the data may be corrupted. Do not remove the connected external unit during playback!
- There is only one way to insert a USB device. If that doesn’t work, turn it over and try again; don’t force it!
- Make sure that devices protruding from the appliance are not damaged!
- Abnormal operation may be caused by the unique features of the mass storage device, which does not indicate a malfunction of the device!
- Do not charge a device (e.g. mobile phone) from the USB socket!
USE OF THE RADIO
Select the FM radio mode by briefly pressing the MODE button. The display
shows the reception frequency. To start auto tuning and storage, press the
button for ~ 2 seconds. When the setting is completed, the unit switches to
the first radio program found. Additional memorized programs can be accessed
by briefly pressing the scroll buttons. The program positions P01… P50 on the
display show the storage location of the respective radio station.
-
Pressing briefly the button mutes the radio, and pressing it again switches the speaker back on.
The search stops when it detects a variable signal strength – this does not always mean finding a radio program. -
The reception capability of the radio depends to a large extent on the place of use and the current reception conditions.
-
Do not place large metal objects or electrical equipment near the device!
-
Carefully pull out the rear telescopic antenna and adjust it for the best reception. The placement of the device also affects the quality of reception. In poor reception areas, the connected AUX cable also acts as an antenna, improving reception.
-
If you listen while charging, network noise may occasionally occur in the speakers. This device is designed to be used with a battery, it is recommended to recharge it after use.
KARAOKE FUNCTION
If you have a microphone with a 6.3 mm diameter plug, you can accompany the
songs you are playing with songs. Insert the microphone plug into the MIC
jack. Adjust the desired volume with the MIC control.
WIRED AUDIO INPUT (AUX)
The 3,5mm AUX (LINE IN) input is used to connect external devices with
headphone output or audio output to the amplifier (mobile phone, tablet,
computer, multimedia player, instrument, CD / DVD…). When the plug is
inserted, the AUX (LINE IN) input is activated automatically and the message
LINE appears on the display.
- The available sound quality depends on the quality of the audio signal provided by the external device and its volume and tone settings.
- A small signal (volume) input to the sound box may cause extra noise and a signal that is too large may cause distortion. It is recommended to keep the volume of the source at a moderate level.
- In some cases, you may need to purchase a connecting cable or external adapter for proper connection.
- For further information, refer to the instruction manual of the device you want to connect.
- In poor reception areas, the connected AUX cable also acts as an antenna, improving reception.
BUILT-IN LAMP AND EMERGENCY LIGHT
The rear light can be useful companion after dark or even searching in the
trunk. By pressing the LAMP button once, it lights continuously, and when
pressed it twice, the lamp lights intermittently. The third button press
switches it off.
- The flashing light functions as the classic „SOS” emergency call (three short and three long flashes).
- The lamp can be used independently when the unit is turned off.
CLEANING
Power off the device by unplugging it from the electric outlet before
cleaning. Use a dry cloth! Do not use any aggressive cleaner and liquid.
MAINTENANCE
Occasionally check the integrity of the housing. Immediately power off the unit and contact a specialist in case of any anomaly.
TROUBLESHOOTING
In case of detecting any malfunction, switch off and the device by unplugging
it from the electric outlet! Try to switch it on again later. If the problem
still persists, see the following list. This guide will help you to identify
the error, if the device is connected as prescribed. If necessary, contact a
professional.
General
The device does not work, the screen does not light.
- The device is not switched on.
- Check is the VOLUME switch is switched on.
- The built-in accumulator is depleted.
- Connect the charger and charge the accumulator up.
The device seems to work, but it does not emit sound.
- The setting of the volume control is not appropriate.
- Make sure that neither the VOLUME or the external signal source’s volume control is set to minimum.
- Connection of audio cables is wrong.
- Check if the connection of audio cables are correct, and complies with the standards.
MP3 playback
It does not play files from the correct storage.
- Not the desired signal source or device has been.
- Press briefly, repeatedly the MODE button.
MP3 playback does not work.
- A write error has occurred. The MP3 format is incompatible.
- Make sure if the MP3 format is compatible.
- Contact problem with the USB slot.
- Check if there is no foreign object in the connector. Carefully clean with a dry brush if necessary.
- Incorrect (e.g. sloping or coarse) connection may cause problems with the contact. Reconnect the external unit.
- Defective or non-standard memory unit.
- Due to production scattering, there may be differences between memory types of the same type that affect the use.
Playback is noisy.
- A write error has occurred. The MP3 format is incompatible.
- Make sure your MP3 format is correct.
- The storage is faulty or there is a contact error when connecting.
- Check the data storage for compatibility and connection.
- A data copy error has occurred.
- Check the applied compression software and the computer.
The sound of the wired microphone (option) cannot be heard.
- The MIC VOLUME controller is not set correctly on the control panel.
- Check that this controller is set to minimum position.
- Check if the microphone is switched on.
