veea VHE10 Smart Computing Hub User Guide
- June 6, 2024
- veea
Table of Contents
veea VHE10 Smart Computing Hub
Welcome
Thank you for choosing VeeaHub. Please follow these simple but important
instructions for optimal use of your new device.
Package Contents
Your VeeaHub package contains the following:
- 1 xVeeaHub
- 1 x Power Adaptor – including country specific lead
- 1 x WalVCeiling Mounting Bracket – including mounting screws
- 1 x Quick Start Guide
Your VeeaHub Unit
Installation & Support
For instructions on how to install and register your VeeaHub, please visit www.veea.com/products/VHE10/user_guide or scan the QR code below.
Notes & Warnings
-
If an Ethernet cable (not supplied) is used, it should be of a shielded type (CAT 6 or greater)
-
This unit contains a CR2032 coin cell battery .
CAUTION:
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. -
The ambient operating temperature range of this equipment is 0 °C to 50 °C.
-
Your VeeaHub should be placed or mounted on a flatsurface. The unit and mounting bracket should not be obstructed.
Compliance
For regulatory compliance information, please visit www.veea.com/products/VHE10/regulatory. See the regulatory compliance document before connecting the power supply.
C 2018 Veea Inc. All rights reserved.Veea and VeeaHub are trademarks ofVeea Inc. All other trademarks and tradenames are the property of their respective owners. QUICK START GUIDE VHE10-Vll01
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>