CHAMPION 200954 4250W Open Frame Inverter User Guide
- June 6, 2024
- Champion
Table of Contents
CHAMPION 200954 4250W Open Frame Inverter
WARNING:
Read the ENTIRE operator’s manual to become familiar with the features of the product before operating. Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury or even death.
Set Up
-
Open shipping carton. ° Assembly > Unboxing
-
Remove shipping spacers. ° Assembly > Remove Shipping Support Spacers.
-
Add oil. ° Assembly > Add Engine Oil.
Recommended: 10W-30, up to 18.6 fl. oz. (550 ml) DO NOT overfill. -
Move the generator outdoors.
- Move generator to an open, outdoor area. Point exhaust away. Never run generator in enclosed areas (e.g., not in house or garage).
- Keep all objects at least 5 feet (1.5 m) from generator. Heat from the muffler and exhaust gas can ignite combustible materials.
Start-Up
- Add fuel. ° Assembly > Add Fuel DO NOT use E15 or E85.
- DO NOT plug in any electrical devices .
- NEVER START OR STOP THE GENERATOR WITH ELECTRICAL DEVICES CONNECTED OR TURNED ON!
- Turn the fuel valve “ON”.
- Press the engine switch to the “ON” position.
- Pull the choke knob out to the “CHOKE” position.
- Pull the recoil to start the engine.
- Push the choke knob in to the “RUN” position.
- Plug in. ˛ Operation > Connecting Electrical Loads.
Visit our YouTube channel to watch our how-to videos and subscribe to view our latest videos on our Champion Power Equipment products!
www.championpowerequipment.com
© Champion Power Equipment 2020.
All Rights Reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>