Steelplay JVASWI00075 Screen Protection Kit User Manual
- June 6, 2024
- Steelplay
Table of Contents
Steelplay JVASWI00075 Screen Protection Kit
IMPORTANT PRODUCT SAFETY INFORMATION
Safety of children and vulnerable people – V WARNING: Choking Hazard
This device may contain small parts that may be a choking hazard to children
under 3. Keep small parts away from children. Make sure to never leave this
product within the reach of young children. Do not let children play with the
device. Do not leave packaging within the reach of children. Children should
not clean or attempt any maintenance on the device unattended. Make sure
children using this product play safely and within their limits, and make sure
that they understand proper use of the device.
ABOUT STEELPLAY® DOCAKBLE CLEAR CASE
The Steelplay ® Thin Protective Case is a protective hard-shell enclosure for the Nintendo SwitchTM console and Joy-ConTM controllers that lets you keep the entire case on even while docked.
CONTENT
- 1 x blue Joy-ConTM cover
- 1 x red Joy-ConTM cover
- 1 x bottom cover
- 1 Screen Protection Kit (1 wet wipe, 1 dry wipe, 1 dust absorber sticker, 2 guide stickers)
- 1 manual
INSTALLING THE THIN PROTECTIVE CASE ON THE NINTENDO SWITCHTM CONSOLE
Place the console’s unit cover on a flat surface with the blue part on the
left and the red part on the right. Gently insert the console center unit into
the guard and bring the edges of the guard back to the front of the console
center unit. Adjust the placement of the cover so that the access to the
console controls, ports, and buttons are not obscured.
INSTALLING THE THIN PROTECTIVE CASE ON THE NINTENDO SWITCHTM JOY-CONTM
Gently insert the blue Joy-ConTM inside the blue protection. Adjust the
placement of the protection so that access to the controls, ports, buttons of
the Joy-ConTM are not obscured. Gently insert the red Joy-ConTM inside the red
protection. Adjust the placement of the protection so that the access to the
controls, ports, buttons of the Joy-ConTM are not hidden. To remove the
covers, carefully remove them from the Joy-Conte.
INSTALLATION OF THE TEMPERED GLASS SCREEN PROTECTION
Clean the console screen using the dry wipe, then dry it with the dry wipe.
Take the dust absorber sticker to remove the particles left behind by the dry
wipe. Simply tape it to the screen and remove it repeatedly all over the
device. (For the next steps, we recommend avoiding putting your fingers on the
glass surface but holding the screen by the external sides or using the guide
stickers by sticking them on the non-adhesive part of the glass screen.)
Extract the tempered glass screen from the protective pocket. Remove the
protective film from the adhesive part of the protective screen. Gently place
the tempered glass on the console screen starting by the bottom edge and
making sure that the cut-outs are aligned with the sensors.
Once the tempered glass is well-positioned, you can expel the air bubbles with
a plastic card or a soft cloth by pushing them to the nearest edge.
CUSTOMER SUPPORT
For answers to common questions, troubleshooting steps, and our Customer
Support team, e-mail us at: sav@pixminds.com.
TERMS OF WARRANTY
The warranty period is 2 years from the date of purchase with proof of purchase submitted. Operating instructions must be followed. Specifically excludes any damages associated with leakage of batteries. The product must not have been damaged as a result of defacement, misuse, abuse, neglect, accident, destruction or alteration of the serial number, improper electrical voltages or currents, repair, alteration or maintenance by any person or a party other than our own service facility or an authorized service center, use or installation of non- Steelplay® replacement parts in the product or the modification of this product in any way, or the incorporation of this product into any other products, or damage to the product caused by accident, fire, floods, lightning, or acts of God, or any use violative of instructions furnished by Steelplay®. Obligations of Steelplay® shall be limited to repair or replacement with the same or similar unit, at our option. To obtain repairs under this warranty, present the product and proof of purchase (e.g., bill or invoice) to the authorized Steelplay® Technical Support Center transportation charges prepaid. Any requirements that conflict with any state or federal laws, rules, and/or obligations shall not be enforceable in that particular territory and Steelplay® will adhere to those laws, rules, and/or obligations. When returning the product for repair, please pack it very carefully, preferably using the original packaging materials. Please also include an explanatory note. IMPORTANT: To save yourself unnecessary cost and inconvenience, please check carefully that you have read and followed the instructions
Model. JVASWI00075 / GCSWI108
©2021 Pixminds Distribution. All rights reserved. “Steelplay”, “Pixminds
Distribution” and their logos are trademarks and/or registered trademarks of
Pixminds Distribution SAS, and/or its affiliated companies. “Nintendo”,
“Switch” and their logos are trademarks and/or registered trademarks of
Nintendo of America Inc., Nintendo Co., Ltd., Nintendo of Europe GmbH. All
other product names and images, trademarks or registered trademarks are
properties of their respective owners. This is a product 100% NOT official and
is NOT manufactured, guaranteed, sponsored, endorsed or approved by Nintendo
Co., Ltd. Made in China. Product features, appearances, and specifications may
be subject to change without notice. Please retain this information for the
future.