Shenzhen Shimeitong Intelligent Technology PB-08AC0 8-Inch Ultra-Thin Human Face Temperature Detection and Recognition Terminal Instructions

8-inch ultra-thin human face temperature detection and recognition terminal
Gate Machine, Wall Hanging, countertop, floor-to-ceiling access model no. PB-08AC0

Image:

Application scenario:

Applicable to office areas, hotels, turnstiles, office buildings, schools, shopping malls, shops, communities, public services and other places where people need access control.

Product characteristics:

• Support simplified Chinese, traditional Chinese, English, Japanese, French and other languages;

• Wide Dynamic double-shot live anti-counterfeiting, completely solve all kinds of photos on various carriers on the deception;

• Night Infrared, RGB double fill lamp; ·Support serial port, Wigan 26,34 output input, output content support configuration;

• Real-time temperature monitoring, temperature tolerance range accurate to 0.3, temperature detection distance 0.3-0.5 meters, support equipment local storage 10,000 people library:
  a. Cloud devices support simultaneous storage of 50,000 face photos (less than 400 KB) , 1 million recognition records (0.45 kb) and 20,000 live photos;
  b. Lan devices support simultaneous storage of 20,000 face photos (calculated in 100 KB) and 1 million recognition records (including the most recent 10,000 live photos) ;

• 1: N Face Recognition, face database supports 2W faces, the top 1 hit rate is 99.99% ;

• 1:1 The accuracy of authentication comparison is more than 99%

Fast recognition:

• face tracking and detection takes about 20ms; · face feature extraction takes about 200ms;
• face matching in Vivo took 0.2 ms;
• The feature comparison takes 0.5 ms (10000 face database, the average of which is recognized many times)
• wear a mask for temperature identification and adjust the cutting value to 70%,
• Support Stranger detection, stranger level can be configured;
• Support face recognition or stranger detection of the scene photo preservation;
• Support Public Network, Local Area Network Deployment;
• Support HTTP, TCP mode interface docking;
• Support Screen Display content configuration;
• Support for identifying distance configurations.

Environmental Requirements:

Conditions to be avoided during use

1. The sensor should be used in an indoor environment because it is greatly influenced by the environment when used outdoors
2. Because of the characteristic of an infrared sensor, the accuracy of measurement will be seriously affected in the application environment, such as the sensor facing the window, air conditioner, radiator, and other high-temperature objects

Product Specification Sheet:

temperature detection module
Network module| support cable, 2.4 Gwifi, 4G (optional)
Interface| Audio frequency| All the way audio line out
USBlnterface| USB2.0 micro 2 t
Serial 232| 2 RS232 interface, 1 way WG input, 1-way WG output
Wigan interface| 2.5 mmx2pin
Reset interface| Lateral pore position, external key
OTG interface| Route 1
Function| Local offline use| Local 2W face database
---|---|---
1: N Face Recognition| Supports a 1 in 10,000 chance of being wrong, a 99% pass rate
1:01| Supporting the Optional Card Module, ID card module can
achieve 1:1 face comparison
Stranger detection| Support
Recognition Distance
Setting| Support
Remote upgrade| Support
Device interface| Equipment Management, access control, personnel / Photo
Management, Record Query, etc.
Conventional parameter| Protection level| IP64, waterproof and dustproof support for semi-outdoor use
Power supply| DC12V
Operating temperature| 10°C–4011:
Working Humidity| 10%–90%
Static electricity| 4K/8K
Electromagnetic radiation| Non-frequency overshoot
Power consumption| 5W MAX
Installation mode| Wall Hanging, table support, brake installation, floor support
Equipment Weight| 1.8KG
Equipment size| 373.4*133mm

Product Specification Sheet:

notification display, identification card information, confirmation
success or failure tips, can be customized. Version number,
| | number of people, number of stock images.
---|---|---
Menu interface| Menu Style and human-computer interaction, how to access other modules, management, etc.
User Management| User add| New Staff for local application
User delete| Delete personnel from local application
Equipment Management| Lock picking rules| Opening time after verification
Wigan RS232| Wigan 2634, RS232
Language setting| Simplified form
Network setup| Wired, wireless
Time setting| Time, date, time zone, settings (manually set the goods server synchronization)
Voice Setting| 0-10(0 bit mute, default is 5)
Luminance control| 1-10(default: 5)
About this machine| Date of manufacture| The equipment’s time of manufacture
Serial number| Device serial number
Manufacturer| Name of manufacturer
Machine type| Type of equipment
Firmware version| Current firmware version
Detection Update| (reserved)
Help| Help Documentation
In the news| Other functions| Customizable

Port description

Installation method

According to the requirements of the installation site, open a 35mm diameter hole (as shown in the figure below) in the space position of the gate (usually the middle or front side). Note: The position of the opening should be based on the actual gate type and scene, and 35mm is your reference only.
Unscrew the nut at the bottom of the gate head post. thread the cable out of the nut, and remove the nut.

Pass the cable and the cable interface to the gasket and nut under the gate successively, and tighten the nut, power on the device, and the screen will start. Note: The brackets in the figure above are for installation reference only. non-standard accessories.

Care and Maintenance

1. During the installation and use of the product, all electrical safety regulations must be strictly observed
2. Please use the power adapter provided by the regular manufacturer. For specific requirements of the power adapter, see the product parameter table
3. When installing on the gate, please make sure that the product is installed firmly
4. If the product does not work properly, please contact the after-sales service team. Do not disassemble or modify the product in any way. (The company does not assume any responsibility for problems caused by unauthorized modification or repair
5. Do not immerse the product in water. When the product is installed outdoors, try to use it with the rain cover provided by our company
6. Please understand that you are responsible for properly configuring all passwords and other related product security settings, and keeping your username and password  properly
7. If the equipment does not work properly, please do not disassemble it for repair, otherwise, it will affect the equipment warranty
8. Avoid extreme or extreme environments such as extremely high temperature (Or low temperature), high humidity, vibration, radiation, and chemical corrosion during installation and use

Warranty Card
Dear customer, thank you for purchasing the Smart Face Recognition Access Control management module. In order to better serve you, please read, fill in and properly keep the warranty card after purchasing the product

Your name…………………
Contact person…………………………..
Telephone…………………..
Address……………………………
Date of purchase…………………………
Serial number………………………..
Maintenance records…………………………….
Cause of issue…………………………….

Warranty Description

1. This warranty card is required to be properly kept by the user as proof of repair
2. This product is guaranteed for one year from the date of purchase
3. Warranty Equipment During the warranty period, under normal use and maintenance conditions, the machine itself malfunctions. Upon inspection, the company will provide free repair and parts replacement
4. During the warranty period, if the following events occur, the company has the right to refuse service or charge materials and maintenance service fees as appropnate
5. This warranty card and valid proof of purchase cannot be provided
6. Product failure and damage caused by improper user use
7. Damage due to abnormal external forces
8. its, not our maintenance service, and the user dismantles it to cause damage
9. Failures and damage caused by natural disasters or other force majeure factors
10.  Others intentionally damaged The company reserves the night to modify and interpret all content

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
RF warning:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>