MPOW BH475A Black Over The Ear Wireless Bluetooth 5.0 Headphone User Manual

MPOW BH475A Black Over The Ear Wireless Bluetooth 5.0 Headphone

PACKING LIST

HOW TO CHARGE

Option l:

Option 2:

TRANSMITTER  DIAGRAM

1. BT power switch
2. BT indicator light
3. Optical port
4. Optical indicator
5. Optical or AUX/DCIN switch
6. AUX/DCIN indicator light
7. AUX port (3.5mm audio port)
8. DCI N port (USB port)
9. A/B button
10. Power indicator light

USE ENVIRONMENT

Turn the BT Power switch to “ON” to power on the transmitter. Then, the transmitter will enter Bluetooth transmitter mode. In this way, the audio files from Non-Bluetooth audio sources will be transmitted to a Bluetooth headset/ Bluetooth speaker etc. via Bluetooth transmission

HOW TO CONNECT

TRANSMITTER CONNECT WITH NON­BLUETOOTH DEVICE
Connect to a computer
Connect the transmltter toyour computer wlth the data cable and turn on the BT Power switch of the transmitter. Flip the Optical or AUX/ DCIN switch to the AUX side. For the first use. the computer will automatically prompt that the driller has been Installed successfully. After the installation, the transmitter will begin to serve .

Connect to a TV through AUX

1. Connect the transmitter to the USB port of the television with the data cable. Or connect the transmitter to a SV DC power supply with the data cable.
2. Connect the AUX port of the transmitter to the AUX port of the tBlevlslon with an AUX cable.
3. Rip the Optical or AUX/DCIN switx:h to the AUX side.

Connect to a TV through OPTICAL

1. Connect the transmitter to the USB port of the television with the data cable. Or connect the transmitter to a 5V DC power supply with the data cable.
2. Connect the Optical port of the transmitter to the Optical port of the television with an Optical cable.
3. Flip the Optical or AUX/DCIN switx:h to the Optical side.

Connect to a TV through RCA

1. Connect the transmitter to the USB port of the television with the data cable. Or connect the transmitter to a SV DC power supply with the data cable.
2. Connect the AUX port of the transmitter to the RCA port of the television with a 3.5mm male to 2 RCA male cable.
3. Flip the Optical or AUX/ DCIN switch to the AUX side.

TRANSMITTER PAIR WITH BLUETOOTH HEADPHONE

Enable the Bluetooth function on your Bluetooth device (such as Bluetooth headset/ Bluetooth speaker). Place it about 3.3ft (1 m) within the transmitter. When pairing is completed. the blue indicator light stays on for l Omin and then goes off.

DISCONNECT FROM THE CURRENT BLUETOOTH DEVICE

CLEAR THE PAIRINO RECORD

DUAL CONNECTION

1. Press A/B button once with the BT indicator flash blue quickly.
2. Enable the Bluetooth function on your first Bluetooth device. and connect with the transmitter.
3. Press A/B button once again with the BT indicator flash blue quickly.
4. Enable the Bluetooth function on your second Bluetooth device. and connect with the transmitter.

HEADPHONE DIAGRAM

HOW TO PAIR

With your headphones powered off. press and hold the MFB until the red and blue lights flash alternately to enter the pairing mode. Enable the Bluetooth feature of your cellphone and find “MPOW T20” to connect.

PLAY/PAUSE/ANSWER/HANCUP/ REJECT/REDIAL

VOLUME CONTROL/MUSIC CONTROL

FCC STATEMENT

Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operatethe equipment.This device complies with part 15 of the FCC Rules. Operation issubject to the following two conditions: (1) This device may not causeharmful interference. and (2) this device must accept any interferencereceived, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one or more ofthe following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>