emerio CBC-124348.1 Infrared Panel Heater Instruction Manual

: June 6, 2024
: emerio

Table of Contents

SAFETY INSTRUCTIONS
PARTS DESCRIPTION
LED display
Remote control
WALL MOUNTING
OPERATION
- Basic functions
More advanced functions: (Only by remote control.)
- Weekly timer function
Open-window detection function
ECO function
SAFETY FEATURE
CLEANING AND MAINTENANCE
TECHNICAL DATA:
GUARANTEE AND CUSTOMER SERVICE
ENVIRONMENT FRIENDLY DISPOSAL
ERP information (EN)
Read User Manual Online (PDF format)
Download This Manual (PDF format)

emerio CBC-124348.1 Infrared Panel Heater Instruction Manual

SAFETY INSTRUCTIONS

Before use make sure to read all of the below instructions in order to avoid injury or damage, and to get the best results from the appliance. Make sure to keep this manual in a safe place. If you give or transfer this appliance to someone else make sure to also include this manual.

In case of damage caused by user failing to follow the instructions in this manual the warranty will be void. The manufacturer/importer accepts no liability for damages caused by failure to follow the manual, a negligent use or use not in accordance with the requirements of this manual.

Read and save these instructions. Attention: pictures in the IM are for reference only.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
Children of less than 3 years should be kept away unless continuously supervised.
Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.
CAUTION — Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
This appliance is intended to be used in household and similar applications.
Do not use outdoors. Do not use to dry clothes or any fabric.
The heater must not be located immediately below a socket outlet.
Do not use the heater if the power cord is damaged.
WARNING: In order to avoid overheating, do not cover the heater.
WARNING: The heater must not be used if the panel is damaged.
The heater is to be installed so that switches and other controls cannot be touched by a person in the bath or shower.
Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
Means “DO NOT COVER“.
Keep combustible material such as furniture, cushions, bedding, paper, clothes, curtains etc. at least 100cm away from the heater.
This heater has hot and arcing or sparking parts inside. Do not use it in the areas where gasoline, paint, or flammable liquids are used or stored.
Always unplug the appliance when not in use.
The appliance is hot when in use. To avoid burned, do not let bare skin touch hot surfaces.
The supply voltage and utility frequency, specified on the machine, need to match those of the socket that is used.
Only use an undamaged, earthed socket that is secured with a 30 mA earth leakage circuit breaker. The electrical socket that you are using must be to hand at all times in order to be able to remove the plug from the socket in the event of an emergency.
Fully extend the cord before plugging in the heater. Make sure it does not come into contact with any part of the heater and prevent it from heating up any other way. Do not run the cord underneath carpeting; do not cover it with mats, carpet strips or similar and make sure it is not placed in any passageways. Make sure the cord cannot be stepped on and that no furniture is placed on top of it. Do not lead the cord around sharp corners and do not roll it up too tightly after use!
If possible, do not use an extension cord, as this causes the risk of overheating and fire. If the use of an extension cord is unavoidable, then make sure it is an undamaged, approved extension cord with a minimum diameter of 2 x 1.5 mm² and a minimum permissible power of 1000 Watt.
To prevent overheating, always fully extend the cord!
Do not use the heater outdoors and do not use it in spaces, smaller than 7 m³.
Make sure that the air around the heater can circulate freely. Do not place the heater too close to walls or large objects and do not place it under shelves, cupboards or similar: take at all sides at least 30 cm free space and at least 20 cm from the floor. For hanging installation: don’t block the space between heater and wall.
Carefully supervise when this appliance is used in the presence of children, incapacitated persons or pets. Let persons who are not able to leave the room independently, away from a working heater. The surface becomes hot (up to 95°C), so keep children and people with disabilities out of the neighborhood. Keep the packaging material away from children.
Always switch the heater off, unplug it and leave to cool down before:
- cleaning the heater
- carrying out maintenance on the heater
- touching or moving the heater.
Keep the heater clean. Dust, dirt and/or a buildup of deposits in or behind the heater are a common cause of overheating. Make sure these deposits are removed regularly.
The appliance (incl. cord and plug) may only be opened and/or repaired by properly authorized and qualified persons.
Only use this heater for its intended purpose and as described in this instruction manual.
Regarding the information pertaining to the installation, please refer to the below paragraph of the manual.

PARTS DESCRIPTION

Heating panel
Temperature sensor
Power switch
Control panel
Remote control
- a) LED display
- b) On/off button
- c) Time set button
- d) Value increase button
- e) Value decrease buttons

LED display

a) Temperature / Data
b) Heating symbol
c) Open-window detection symbol
d) Power indicator light

Remote control

On/off button
Cancel button
Open-window detection button
Set button
Ok button
Edit button
ECO button
Temperature button
Time on button
Time off button
Value increase button
Value decrease button
Week button

WALL MOUNTING

The fixing materials supplied are intended for a brick wall. If you are using a different type of surface, you should supply appropriate fixing materials yourself.

This heater has been designed to hang securely from the wall. Do not use it until it has been properly installed, as described in these instructions for use and never, for example, in a standing position or when leaning against something!

Please take below minimum distance picture (fig.1) for reference.
WALL MOUNTING WALL
MOUNTING

Please pay attention to fig.2: The wall-mounting system (A & B) on the rear side of the appliance should be pre-mounted in order to hang it vertically. Viewed from the front, the power switch is at the bottom side and the control panel is at the right-hand side.

A. Wall mounting bracket & knobs
B. Wall spacer (Bracket for keeping space from the appliance to the wall)
Note: The knobs and wall spacer have already been installed on the rear side by the factory.

Please install the wall mounting bracket by following steps.

Choose a firm, even, vertical wall made of heat-resistant material on which to hang the appliance.
Define the position of the wall mounting bracket: the bracket should be mounted horizontal to the wall.
Position the bracket in such a manner that the minimum distances stated in fig.1 are guaranteed after the appliance is mounted to the wall. Mount the bracket with the correct side upwards (see the mark “This
side up” on the bracket).
Mark the positions of the four holes to be drilled on the wall.
Drill 10mm holes in the marked places.
Insert the bolts (A&B) into the holes with a hammer. Put on the wall bracket. Secure the wall bracket immovably against the wall by using the washer (C), gasket (D) and nut (E).
Hang the panel by letting the knobs through the eyes in the wall mounting bracket. Slide the panel as far as possible to the right side and lower it as far as possible. Now the panel is mounted securely.
To remove the panel from the wall, you must lift and slide in the opposite direction, until the knobs are in front of the eyes again. Now you can take the panel off.
Note: Guide the electric cable immediately downwards and make sure that it does not come into contact with the panel. Do not conceal the cable behind the heater!

OPERATION

Plug the appliance into an appropriate electrical outlet. Turn on the appliance by pressing the power switch to position “I”. The power indicator light will be illuminated on the LED display. The appliance is standby.

You can use the control panel on the appliance or the separate remote control to operate your appliance.

Please note the control panel can only operate the basic functions. The remote control can operate the basic functions as well as the advanced functions.

The remote control should be directed towards the LED display while using.

Basic functions

Press the on/off button to turn on the appliance. Press the button again to turn the appliance off.
Set the temperature.
Press the button “+” or “-” to set your desired temperature. You can choose from 0-37℃. Long pressing for rapid adjustment.
The LED display will flash the set temperature approx. 10 seconds and then turn back to show the current temperature. It means the temperature has been set.
If the set temperature is higher than the current temperature, the appliance will start to heat and the heating symbol will be illuminated on the LED display. If the set temperature is reached, the appliance will automatically switch off and then switch on again when the room cools down. The heating symbol will be off and illuminated again accordingly.
Note: If no button is pressed in approx. two minutes, the current temperature will disappear from the LED display. Pressing any button will make the current temperature re-appear.
Set the current day and time (so that you can set the weekly timer function later.)
Let the appliance be on but not heat. Therefore, no heating symbol is illuminated on the LED display. (Do this by setting the temperature lower than the current temperature, for example.)
Follow below steps in the table to set the current day and time. When using the control panel, please press the button “M”. When using the remote control, please press the button “SET”.
Step| Press button| The LED display shows| Note
---|---|---|---
1| M / SET (3 sec.)| HH flashes| It means to set the day of today.
2| + or –| 01 to 07| 01 = Monday, 02 = Tuesday, 03 = Wednesday, 04 =

Thursday, 05 = Friday, 06 = Saturday, 07 = Sunday.

Let the appliance be on and heat. Therefore, the heating symbol is illuminated on the LED display. (Do this by setting the temperature higher than the current temperature, for example.)
Consecutively press the button “M” (on the control panel) / “SET” (on the remote control) to check the current day and time:
HH: day of the week;
H1: hour;
H2: minute.

More advanced functions: (Only by remote control.)

Weekly timer function

Follow below steps in the table to set the weekly timer.

Step	Press button	The LED display shows	Note
1	WEEK (3 sec.)	UU flashes
2	SET	ON or OF flashes
3	+ or –	ON or OF flashes	Select:

+ = ON: Timer function will be on. (During the set times, the heater will automatically switch on/off.)

– = OF: Timer function will be off (During the set times, the heater will not automatically switch on/off.)

4| OK| UU|
5| SET| 01 or 99 flashes|
6| + or –| 01 or 99 flashes| Select:

+ = 01: All timer settings will be executed only once.

– = 99: All timer settings will be executed repeatedly. [See Attention (1)].

7| OK| UU|
8| SET| U1 flashes|
9| + or –| U1 to U7 flashes| Select the day of the week (U1 = Monday, U2 = Tuesday, etc.) for which you want to make a timer.
10| OK| The selected day|
11| ED| 01 flashes|
12| + or –| 01 to 04 flashes| You can make totally 4 timers per day. So name the timer with a number (01, 02, 03 or 04) to distinguish from each other. [See Attention (2)].
13| OK| The selected number|
14| TEMP| HP|
15| + or –| 00 to 37 flashes| Set the desired temperature (0 – 37 °C). The default setting is 20 °C.
16| OK| The selected temperature|
17| TIME ON| HE|
18| + or –| 00 to 23 flashes| Set the desired start time from 00 to 23. [See Attention (3)].
19| OK| The selected start time|
20| TIME OFF| HF|
21| + or –| “start time +1” to 24 flashes| Set the desired stop time from the “start time +1” to 24.

For example, if the start time is 10, the stop time can only be set from 11 to 24. [See Attention (3)].

22| OK| The selected stop time|
Timer setting is finished. The current temperature will appear on the LED display after approx. 10 seconds.

If you want to set the second timer, please repeat the steps above.

Attention (1):
The timer settings which you make under “01” (executed only once) should be made for the current week. On Sunday (day 7) at 24:00, all “01” settings will be set to “non-activated”. Therefore, a timer setting for Saturday that you made on Tuesday will work, but a timer setting for Tuesday that you make on Saturday will not work!
Attention (2):
If a timer setting with number 01 was made for this day, you must manually set the next timer setting for this day to 02 using the button “+”. Otherwise the timer setting 01 will be overwritten.
Attention (3):
Start & stop times can only be set in whole hours (not in minutes)

Note:

If the appliance is switched off by using the power switch or by removing the plug from the electrical
outlet, the day will be set to 01 and the time will count from 00 (hour) and 00 (minute) for the next time you switch the appliance on again. However, the timers that were set previously are still stored. Therefore, to avoid misunderstandings, the weekly timer function will be automatically set to OFF (“OF” shown in LED display) in case of turning the heater off using the power switch or removing the plug from the socket. Otherwise, the heater would switch on and off at the wrong times. Make sure to reset the current day and time once turn on the appliance again and remember to set the weekly timer function to ON (“ON” shown in the LED display) as described in above table.
During the timer setting, if no button is pressed for approx. 10 seconds, the timer setting will stop and you will have to start all over again.
All timer settings – maximum 28 settings: seven (7) days multiplied by maximum four (4) settings per day – are processed consecutively. Therefore, make sure that they do NOT contain contradictions.

Cancel the timer settings

Cancel all the timer settings.
Press the button “WEEK” for approx. 3 seconds until the LED display shows the flashing “UU”.
Long press the button “C” until a beep sound is heard. It means all the timer settings are cancelled.
Cancel all timer settings of a specific day.
Press the button “WEEK” for approx. 3 seconds until the LED display shows the flashing “UU”.
Press the button “SET” consecutively until the LED display shows the flashing “U1” (day 1, for example).
Press the button “+” / “-” to select the day for which you want to cancel the timer settings.
Long press the button “C” until a beep sound is heard. It means all the timer settings of the day are cancelled.
Cancel a specific timer setting.
Press the button “WEEK” for approx. 3 seconds until the LED display shows the flashing “UU”.
Press the button “SET” consecutively until the LED display shows the flashing “U1” (day 1, for example).
Press the button “+” / “-” to select the day for which you want to cancel the timer setting.
Press the button “ED”.
Press the button “+” / “-” to select the number of the timer setting that you want to cancel.
Long press the button “C” until a beep sound is heard. It means this timer setting is cancelled.

Check the timer settings

Press the button “WEEK” consecutively. You will see the following settings in sequence:

Timer on (ON) or timer off (OF)
Once only (01) or repeatedly (99)
U1-U7, day of the week
Timer setting number of the day concerned (01, 02, 03 or 04)
The set temperature
Start time in hours
Stop time in hours

All 28 timer settings are shown, also the timer settings that have not been filled. The temperature of the non-filled timer settings is 20 °C.

Open-window detection function

Press the open-window detection button on the remote control. The open-window detection symbol will appear on the LED display. If the ambient temperature decreases 8℃ or more within 15 minutes, the heater will turn off and the related symbol will flash. If this is the case and you press the button again, the heater will resume its normal operation.

ECO function

This appliance is equipped with the ECO function. If the button “ECO” is pressed, the LED display will show “EC”.

The appliance will start to heat if the ambient temperature drops to below 16℃ and will turn off if the ambient temperature increases to above 16℃. Press the button “ECO” again to switch off the ECO function.

SAFETY FEATURE

In case of internal overheating, the overheating safeguard will switch the heater off. This may occur if the heater cannot give off enough heat or if it cannot draw in enough fresh air. As mentioned above, this is generally caused by (partially) covering the heater, or installing the heater too close to a wall or something similar. In case of overheating, switch off the heater and unplug. Give the heater time to cool down, remove the source of the overheating and use as normal. If the problem persists or if you have not been able to trace the source of the overheating, turn the heater off immediately and unplug. Contact a servicing support to have the heater repaired.

CLEANING AND MAINTENANCE

Keep the heater clean. Switch off the heater, remove the plug from the socket and allow the heater to cool down before cleaning or carrying out maintenance work.

Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do not use aggressive soaps,
sprays, cleaners or abrasives, waxes, polishes or chemical solutions which can cause irreparable scratches and damage! You can keep the back of the heater free of dust with a feather duster. For thorough cleaning of the back, you can take the heater from the wall.
If you want to store the heater at the end of the season, remove it from the wall, unscrew the wall mounting bracket and store the entire unit (in the original packaging) upright in a cool, dry and frost-free place.

TECHNICAL DATA:

Operating voltage: 230V ~ 50-60Hz
Power consumption: 300W

GUARANTEE AND CUSTOMER SERVICE

Before delivery our devices are subjected to rigorous quality control. If, despite all care, damage has occurred during production or transportation, please return the device to your dealer. In addition to statutory legal rights, the purchaser has an option to claim under the terms of the following guarantee:

For the purchased device we provide 2 years guarantee, commencing from the day of sale. If you have a defective product, you can directly go back to the point of purchase.

Defects which arise due to improper handling of the device and malfunctions due to interventions and repairs by third parties or the fitting of non- original parts are not covered by this guarantee. Always keep your receipt, without the receipt you can’t claim any form of warranty. Damage caused by not following the instruction manual, will lead to a void of warranty, if this results in consequential damages then we will not be liable.

Neither can we hold responsible for material damage or personal injury caused by improper use if the instruction manual is not properly executed. Damage to accessories does not mean free replacement of the whole appliance. In such case please contact our service department. Broken glass or breakage of plastic parts is always subject to a charge. Defects to consumables or parts subjected to wearing, as well as cleaning, maintenance, replacement of said parts or shipping and transportation costs to and from any place of repair are not covered by the warranty and are to be paid.

ENVIRONMENT FRIENDLY DISPOSAL

Recycling – European Directive 2012/19/EU

This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased.

They can take this product for environmentally safe recycling.

Emerio Switzerland AG
Industriestrasse 47
6300 Zug
Switzerland

ERP information (EN)

Supplier: Emerio Switzerland AG
Industriestrasse 47
6300 Zug
Switzerland

Declare that the product detailed below:

Information requirements for electric local space heaters

Model identifier(s):

output

output (indicative)

continuous heat output

consumption

output

| elmax| 0,282| kW| Type of heat output/room temperature control (select one)
At minimum heat

output

| elmin| N/A| kW| single stage heat output and no room temperature control| No
In standby mode| elSB| 0| kW| Two or more manual stages, no room temperature control| No
| | | | with mechanic thermostat room temperature control| No
| | | | with electronic room temperature control| No
| | | | electronic room temperature control plus day timer| No
| | | | electronic room temperature control plus week timer| Yes
| | | | Other control options (multiple selections

possible)

6300 Zug

Switzerland

Satisfies the requirement of the Council Directives:

COMMISSION REGULATION (EU) No 2015/1188 of 28 April 2015 and Amending COMMISSION REGULATION (EU) 2016/2282 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for local space heaters

Regarding information for consumers on how to install, use and maintain the product, WEEE information,
please check the instruction manual provided with packaging.