Shenzhen Yecon Technology TR08D Face Recognition Intelligent Terminal User Guide

**Shenzhen Yecon Technology TR08D Face Recognition Intelligent Terminal User Guide

**

Product Description

This product is aimed at the demand of large capacity, high performance, wide applicability and customization
in the application process of face recognition. It introduces a face recognition intelligent temperature measurement
hardware, which can be combined with face recognition algorithm to provide users with a safe use environment

The product is based on Rockchip RK3399, dual core cortex-a72 (2.0 GHz) and quad core cortex-a53 (1.4 GHz) processor, 200W RGB + IR binocular camera, supporting WiFi + 10m / 100M adaptive Internet and rich peripheral security interfaces to meet user access control management and control requirements.

The product is suitable for office areas, hotels, passage gates, office buildings, schools, shopping malls, shops, communities, public services and management, etc. where face recognition and temperature measurement are required.

Features

• High performance

• Binocular camera

• Distance sensing

• Tricolor lamp

• Card reader

• Security interface

• Multiple International

• installation Protection

temperature measurement, it supports 10,000-level human face database
2| Algorithm| Support the testing of domestic top Al algorithm manufacturers.
3| Speed| Combined with face recognition “aigorithm, face’ recognition” and” body” temperature detection can be completed quickly.
4| Anti – Counterfeiting| Binocular face recognition, support infrared live detection.
5| Interactive| Using tOF human detection,8-inch ultra-clear touch screen + sound + LED light interactive prompt
6| Surrounding| Super environmental adaptability, under low light and strong backlight, all have good performance.
7| Stable| Android or Linux system, server-level stability.
8| Open| Provide development kit, Satisfy SI/ISV the  Manufacturer’s secondary development needs.

Specification And Performance

Cl assification

| Project|

Parameters

---|---|---
Device| Equipment| Aluminum alloy| Operating system| Andriod7.1
Dimension| 239mm 134mm 20.6mm
Processor| PK3399 dual Cortex A72+ four cortex-A53 size core CPU structure
Ram| 2GB| ROM| 16GB
Display| 8” Resolution 800 1280| Touch Screen| 8 Inch Touch Screen
Interface| Ethernet| 100Mbps| Serial| TTL 3.3V
Wifi| Support| Contact| 2
Data interface| USB 2.11| RS485| RS4851
MIC| 1| Loudspeaker| 1 W*2
DC-IN| 12/1.8A| Button| Reset
Access control interface| Support relay wig and RD485, NFC and face Recognition access control
Working Environment| Operating temperature| -10°C -+ 60°C| Storage temperature| – 20°C-+70°C
Working Humanity| 20%-95% Non- Condensing| Machine Strength| Max <18W
ESD| ±4KV Contact ±Kilovolt Air| International Protection| IP 67
Features| Anti-disassembly| Support| Human Detection| Infrared induction
Fill-in Light| LED fill light strip (White, green, red,)
Camera| RGB Camera| 2 Mega-pixels wide dynamic
Infrared camera| 2 mega-pixel
IC Card| NFC: ISO14443B/15693/18092
Algorithm| Living body detection, Face recognition
Temperature measurement| Infrared thermal imaging temperature measurement

Product List

Structure Diagram

Wiring Description

Electric lock wiring

Note
As an independent access control machine, this device can unlock the contact point and exit button to ensure that the power of 12V power supply can meet the requirements of equipment and electronic control lock.

Access controller Connection

Note:
The combination of No and Com is normally open, while that of NC and com is normally closed. The main ‘equipment needs to use our power supply for independent power supply.

Installation instruction

Environment requirement

In the installation and use of this product, please strictly follow all local electrical regulations.
If the equipment is not working properly, please do not disassemble and repair it by yourself, otherwise it will affect the equipment warranty. During installation and use, extreme or extreme environments such as extreme high temperature (or low temperature), high humidity, high backlight, vibration, radiation, and chemical corrosion must be avoided,

+ Lighting conditions: We recommend installation in indoor or semi-outdoor environment, ensuring a well environment, avoiding direct sunlight or low light affect the recognition speed, to avoid facing the glass doors or glass walls.

+ Network: It is recommended to install the network open environment, to avoid the bad effects of network identification speed and accuracy.

Precautions
Before opening the host device, the screen protector should be tom apart to avoid affecting the accuracy of the camera and infrared recognition.

Location
The recommended installation height of the device is 150cm (camera height).

The recommended installation height (height of cameras) is 1.5m which can cover human height of 1.55m – 1.85m when the distance between the person and the panel is 0.5m.The best recognition distance is 50cm to 80cm from the device, as shown in the below image best recognition distance is 50cm to 80cm from the device, as shown in the below image. It can be adjusted according to the effect of face image acquired by the device. When the face image is large, it can move backward properly; when the face image is small. can move forward properly.

Recommended location

The recommended installation height (height of cameras) is 1.5m which can cover human height of 1.55m – 1.85m when the distance between the person and the panel is 0.5m.The best recognition distance is 50cm to 80cm from the device, as shown in the below image best recognition distance is 50cm to 80cm from the device, as shown in the below image. It can be adjusted according to the effect of face image acquired by the device. When the face image is large, it can move backward properly; when the face image is small. can move forward properly.

Wrong Usage

Gate Installation

Threading: Thread the bundle wires on the device through the column connector 1 and column 2 in turn, and fix the connector with the host with screws. The threading sequence is: RJ45 female base, USB female head, power cord, and terminal block.

Fixation: Install the face device on the hole of the gate, rotate it to a proper angle, and tighten the fixing nut.

Installation Position

On the wall about 140cm above the ground, open a hole slot about 9 * 9cm in length and width and 6cm in depth, and select 86 cassette with a depth of 5cm to install and fix.

3 sets of wires need to be embedded in advance at the host equipment (reserved wire length is 10cm):

• 12V power cable RVV2 x 1.0 standard and above, one end is at the host device, and the other end is
  pulled to the original access control dedicated power supply or the 220V power supply 3 hole socket on the top of the sliding door, When installing connect to the 12V end of the factory supplied 12V1.8A power adapter. The 220V power cable of the adapter is directly plugged into the 220V power supply 3-hole socket.

• Door opening control line RVV2 x 0.5 standard and above, one end is at the host device, and the other end is pulled to the original access control dedicated power supply or the top controller of the sliding door, and connected to their door opening signal interface during installation.

• Cat5e network cable 8 x 0.5 oxygen-free copper standard and above, one end is at the host device, and the other end is  pulled to the weak motor room switch, and connected to the Internet during installation. If it is difficult to increase the wired network, you can consider using wireless when the wireless network is stable.

Installation Steps

Step 1: Fix 1. Fix the wall plate on the 86 cassette.

Step 2: Fix 2. Fix the wall bracket and wall screw on the equipment.

Step 3: Wiring. Refer to the “wiring instructions”, connect.

Step 4: Lock. Screw down the host and wall mount with the corresponding port and adjust the position of the screws from the bottom to finish the installation. wiring port until the equipment can be buckled into th wall mounted accessories.

Declaration of toxic and harmful substance

This table is compiled according SJ/11364

| Indicates that the content of the harmful substance in the part is under the limit specified in GB/T26572
---|---

X

| Indicates that the content of the hazardous substance in the component exceeds the limit specified in GB/T26572
| This marking period is 10 years, Under normal use conditions, hazardous Substances in electronic and electrical products will not leak or mutate, and will not cause serious environmental pollution or cause serious damage to personal and property safety.
This product meets RoHS environmental requirements.

Product Warranty Card

Thank you for purchasing our products. | guarantee the interests of our customers. If the products

of our company fail due to quality problems, they can contact the local dealers with the invoice and
warranty card.

Warranty notice:

1. Within one year from the date of purchase, in case of failure under normal use, the company will provide free warranty, parts replacement and other services according to the fault conditions.
2. The warranty card and purchase invoice are the certificates for our company to provide after- sales service to customers. This card is valid after the following forms are filled in in in detail and stamped with the official seal of the dealer.
3. Under one of the following circumstances, free warranty service is not implemented, and maintenance is required at a charge;
4. Beyond the validity of the warranty.
5. Damage caused by improper use, maintenance or storage not in accordance with the requirements. of the product manual.
6. Failure and damage caused by dismantling, repairing and refitting products without permission of our company.
7. Mechanical failure or damage caused by force majeure.
8. Wearing parts and random accessories.

This card is issued with the goods, one card for each machine. In order to ensure that you can fully enjoy the right of free warranty service provided by our company, please keep this card properly and do not make up for it if it is lost.

FCC warning statements

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Warning Statement

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This device complies with ISED RF radiation exposure limits set forth for an uncontrolled environment.

This device must be installed and operated with a minimum distance of 20 cm between the radiator and user body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>