antaira 4-Port USB2.0 to Ethernet Adapter (USB over IP) Installation Guide
- June 6, 2024
- antaira
Table of Contents
4-Port USB2.0 to Ethernet Adapter (USB over IP)
Installation Guide
Introduction
Thank you for purchasing this 4-Port USB2.0 USB Server (hereinafter referred
to as “The USB Server” ). It provides an ideal solution to use USB devices
over the network instantly. With its Client Software, the network users can
use the remote USB devices over a network as if they were connected directly
to your local PC.
The USB Server supports High-speed USB devices such as printers, scanners,
digital cameras, and USB Flash drives over the network. It is ideal for home
office, small office, or industrial applications that access the USB devices
remotely.
Features:
- Provides 4 USB2.0 Downstream Host Ports over Ethernet (or IP)
- Supports Standard USB Hub Mode: the 4 USB Devices can be Accessed by either Ethernet Port or the Upstream USB Connector
- Allows Working With Remote USB Devices as with Local Ones
- Supports High Speed/Full Speed USB2.0 Peripherals
- Provides IEEE 802.3 10/100/1000Mbps, Auto Cross-over Ethernet Port
- DC Jack and Terminal Blocks for DC +7~24V DC Power Input
- Supports Windows XP, 2003, Vista, and Win 7
Connector Layout
- DC Jack and Terminal Blocks Power Connectors: A 7V~24V DC Power is required for this product. Power is supplied from either the DC Jack or the Terminal Blocks, but not both at the same time.
- RJ45 Ethernet Connector: 10/100/1000Mbps Ethernet port. It supports the auto cross-over feature. You can use the same cable to connect to either a Hub/Switch or a host computer.
- Type-B USB Upstream Port Connector: If connect to the PC’s USB host port, the USB server will be switched immediately to work as a simple USB hub, however, the Ethernet port is not able to access the USB devices anymore. In this case, please make sure the Ethernet is not accessing the USB devices (the USB devices are in the free device state), otherwise, the USB devices may not function properly.
- USB Link LED: It indicates the USB devices are linked to the Ethernet port and are been accessing.
- PWR LED: It lights when the DC power is on.
- LAN LED Indicators: There are 2 LEDs on the RJ45 connector, they are described in the following table:
| LED Name | Color | LED Function |
|---|---|---|
| Link | Green | Steady on: The Connection on the Ethernet port is built and |
Active
Off: Ethernet Port Disconnected
Act| Yellow| Blinking : Transferring Ethernet Data
Off: No Data Transferring on Ethernet
Hardware Installation
-
Use static electricity discharge precautions.
Remove possible static discharge potential from any objects that the Adapter may come in contact with before installation. This can be accomplished by touching a bare metal chassis rail after you have turned off the power. -
Attached is the DC power source: there are 2 connectors that can be added to the power to the unit. One is the DC Jack (by the AC /DC Adapter) and the other is the 2-pin terminal blocks.
-
Connecting LAN cable: Use a standard straight-through Ethernet cable to connect to a Hub or Switch. If you connect the USB Server to your computer’s Ethernet port instead, you don’t need to change to a cross-over type cable since the Adapter provides an auto cross-over feature.
-
Connect the USB Server’s USB ports to your USB devices.
Typical Connection Diagram
Software Installation
The USB Server comes with user-friendly client software that maps USB devices connected to the USB server onto the local host machine.
To access the USB devices on the USB Server, each Client PC should install this GUI utility. We call it USB Server Program.
This GUI Utility provides Device Mapping functionality for a user to connect and disconnect various devices found on the network. It also includes a USB Server Manager that lists and provides options to configure the various settings on the USB server remotely.
The Utility was shipped in an Install Shield in the following folder on the driver CD:
To Install the Install Shield, please go to the above folder, double click the Install.exe program in the folder, follow the instruction of the installer to complete the installation.
As soon as the utility is installed, to launch the USB Server Program, please double click its shortcut icon on the desktop, after running it once, the application will be placed in the system tray as shown in the figure below. Double click the icon on the system tray to view and run the Utility on your client’s PC.
Note: For more detail about how to use this USB Server Program, please refer to the PDF manual file in the same folder on the driver CD.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>