PHILIPS DLPE Standard Series Button Panel Instruction Manual

June 6, 2024
Philips

PHILIPS logo

PHILIPS DLPE Standard Series Button Panel

Devices must be installed by a qualified electrician in accordance with all national and local electrical and construction codes and regulations.

WHAT IS IN BOX

PHILIPS DLPE Standard Series Button Panel
fig1

NOT INCLUDEDPHILIPS DLPE Standard Series Button Panel
fig2

DIMENSION

PHILIPS DLPE Standard Series Button Panel fig3

INSTALLATION

STEP1PHILIPS DLPE Standard Series Button Panel fig4 STEP2PHILIPS DLPE Standard Series Button Panel
fig5 STEP3PHILIPS DLPE Standard Series Button
Panel fig6 STEP4PHILIPS DLPE Standard Series
Button Panel fig7 STEP5PHILIPS DLPE Standard
Series Button Panel fig8 STEP6PHILIPS DLPE
Standard Series Button Panel fig9 STEP7 STEP8PHILIPS DLPE Standard Series Button Panel
fig11

FCC

Federal Communications Commission (FCC) Compliance Notice: Radio Frequency Notice – This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any modifications not approved by the manufacturer of this device could void the user’s authority to operate this device.
This Class B digital apparatus complies with Canadian ICES-003: CAN ICES-3(B)/NMB-3(B). Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada: CAN ICES-3(B)/NMB-3(B).
Do not connect inputs to mains.
© 2021 Signify Holding. All rights reserved. Specifications are subject to change without notice. No representation or warranty as to the accuracy or completeness of the information included herein is given and any liability for any action in reliance thereon is disclaimed. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. All other trademarks are owned by Signify Holding or their respective owners.
www.lighting.philips.com/dynalite

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals